The Kuandian network cable is not a plug, it is directly connected to the copper wire. Impact?

.= How much is a thread What does it cost to save a thread in exchange? User complaints? Operators won't be so stupid. Connecting the copper wire directly should not affect unless the copper wire is not in good contact.

The network cable is indeed a stranded wire, and there are 8 wires in the 100m network cable, and 4 of them are useful, which are uplink + uplink - downlink + downlink - and if one of them is broken, it can't be used.

You can directly call the local operator to complain about this, and it should come to you within a week to repair it, if you plan to do so, please as soon as possible, and the staff will be less during the New Year.

Is this the case after installing the broadband or after a period of normal use?

I think the reason may be like this: 1, the reason of the network cable, 2, the reason of the operator's network.

No matter how you solve it yourself, only the problem is the network cable on your side, and it may not be 100% solved. Complaints and repairs are the best policy.

And if you really want to do it yourself, just do what you say, open the box, and screw the copper wire.

Your home Internet should go optical fiber, not ** line, right?

There is no error in the connection, the network speed problem you said should not be your problem, test the speed on the Internet, hit **warranty, and see how the other party solves it. If you want to try it yourself, pay attention to whether there is a lead seal or wax seal in the wiring cabinet, if you have, don't get it yourself, now the operator's ability to repair is not big, and the ability to shirk responsibility is not small.

That's the ** line that connects the copper wire, right? Also, what neighborhood is your home in?

The copper wire is connected to the terminal post in the middle, and the shield wire is tied to the binding post with a circle of iron sheets.

When I took off the plastic cover, I saw the wiring screws inside.

If your computer is turned on, the network cable light is not lit because your relatives have turned off the Internet, because if the pin is suspicious of the connection, at least the physical connection should be through, that is to say, the light is on.

What about the main line in **? If the lights don't turn on, it may be that the cat is turned off, and you can see if you go and see it.

There is an impact, but not much.

There are crimping pliers on the market, and then buy a few crystal heads, you can press them yourself.

Note that the network cable is different from the ** line, the ** line is generally 4, and the network cable is generally 8.

There are crimping pliers that can crimp two specifications at the same time.

If you go online normally, it's fine, if you play games, fix it as soon as possible, and the packet loss rate is serious!

Analogy: When the water pipe brings water to your home, the pipe breaks a few holes in the middle, and the water flows out, and there is less water to your house.

You'd better connect it all, otherwise there will be some inexplicable problems, the line transmission signal, are all electricity, if it comes into contact with other things, it will definitely affect your Internet access. There will also be a lot of uncertainties, and it is highly recommended that you pick it up!

If you can still access the Internet, it will prove that it will not matter, and if you do not achieve it, it will have an impact.

It is recommended to make a crystal head at the broken point. (Harvest net, rice mobile phone).

Let's change it again, it will definitely have an impact.

Yes, but not much. It is recommended to pick it up.

Buy a network cable clamp to dozens of dollars, it's better to go directly to the place where you buy a network cable to spend 2 yuan to ask someone else to help you clamp it, people also help you test the connection is good, how convenient, you can't clip it yourself and waste a joint, it's not cost-effective!

Bonus points!

That requires a special tool - a network pliers, and the line sequence has a certain order, which must be correct. If you don't have the tools, you can go to the electronic city and ask someone to clip it for you, it's very simple. Or just buy a network cable and let someone else do it for you!

You need to have a tool to clip the "crystal head" to make a network cable. The arrangement of the lines is also particular.

Improve plug quality.

1. The reed of the plug should not be too thin, and it is best to walk the correct tolerance. The higher the chemical finish of the surface, the better, and the smaller the contact circuit;

2. The connection between the copper wire and the reed is best with soft crimping, and the copper wire is not damaged and the service life is prolonged;

3. The cross-sectional area of copper wire should not be reduced too much;

4. Do not use recycled material for PBT material.

Use a blade to scrape off the surface embroidery layer.

If it is not rusty, wipe off the surface dirt with something soft.

Press with a bolt. Wound with copper wire.

Requirements for network cables:

1 and 6 are each other's wrapping pairs, if you don't follow this rule, the transmission distance can not meet the requirements.

For pass-through wires: 1-1, 2-2, 3-3, 6-6 For cross-wires: 1-3, 2-6, 3-1, 6-2 pass-through wires are used for connections between different devices, such as network cards to switches (hubs or routers) Crossover lines are used for connections between the same devices, such as network cards to network cards.

Switches and routers now support auto-rollover, which is all-encompassing for crossover and straight-through wires.

But if the network cable is not done according to the above method, the machine will not be able to recognize it.

The port of the two possible 1 network cable is that the crystal head is broken, and 2 may not have the network at all.

Burn the interface with fire, and the copper wire is insulated with paint.

Go buy an interface, get crystal heads at both ends, and plug it in!

Pit, the network cable will be scrapped if it is broken.