11 Which is the rear tail light reversing light line of Tiida?

Its rear tail lights, reversing lights, this line should be the penultimate one, or you can take an appearance to measure it, if there is a voltage through, then it means that it is this line.

I just checked for you, and according to the notice posted on their official website, this one is the red one.

There are three waiting lines, and I suggest that you just click on the red one that is what you need.

Tiida, the rear taillight reversing light line, is the black line that comes out of the rear taillight.

This reversing light can be detected, you look at the original interface color that can be identified and compared, you ask like this, if there is no picture, there is no way to say.

Because the batch is different.

There are three people in the reversing line of the taillights, and it is just right for you to choose the red one.

The rear tail light line reversing is the light line that will turn on when reversing, and that light is generally a red scenery light.

Which is the rear tail light reversing line together? I think the reverse line should be the one in the lower left corner, which is more accurate.

I think it's like this one rear taillight, reversing light line. I guess it's the second one.

Which of the 11 Tiida rear taillights is the reversing line? In fact, if you want to install the reversing image, it is not recommended that you install it yourself, if you modify the circuit yourself, the car spontaneous combustion insurance is not reported, it is recommended to go to the car 4S shop to let the engineer install and repair.

11 years of Tiida rear tail light reversing light line, mine should be marked in that circuit diagram.

I haven't used this kind of car, you can read the product manual, or call the manufacturer a customer service**. You can also ask the professional masters of the car repair shop which is the reversing light line when they are late?

11, which is the other rear tail light reversing line, I think you can take a look at the identity of these professionals, let him let him see you, people should be able to better choose in some ways to see this.

Seven rear tail lights, reversing lights which one borrowed you to log in about the leak**?

It's not really that difficult, but you have to find a professional.

If you don't understand this situation, you can ask about their after-sales service, and you can also look at the relevant manuals, what is going on.

The first-level guards all know which of these are, and you should go to the 4S shop or go to the car repair place to find out.

The new Tiida reversing light line is behind the taillight assembly on the left side of the rear of the vehicle, and it can only be seen after disassembling the lower taillight assembly. There is only one reversing light in the new Tiida, when the vehicle pushes the gear to the reverse, the vehicle reversing light lights up, reminding the rear incoming car in front of the car in reversing state.

The replacement method of Tiida reversing switch is as follows:

1. Prepare a 24mm large sleeve board to disassemble the reversing light switch, and an 8mm plum blossom board to disassemble two 8mm screws of the air lattice. A cross knife is changed, and the air grid assembly is removed to disassemble the card of the air filter and the throttle, with a total of two 8mm screws and a clamp screw connecting the throttle body;

2. Remove the air grid base, remove the upper cover of the air grid, pay attention to unplugging the plug of the flow sensor and the working surface vacated after the air grid is disassembled;

3. When disassembling the reversing light switch, first pull out the wiring harness, pay attention to holding the clip to pull out the wiring harness, and use a 24mm set of eggplant to unscrew the reversing light switch;

4. Connect the new reversing light switch to the on-line bundle, unscrew the electric door without ignition, hang into reverse gear, press the telescopic switch of the inverted light switch head, there is a "beep" sound and the rear reversing light is lit on behalf of the switch working normally, turn off the electric door and remove the wiring harness to install the vibrillating and shouting assembly to the gearbox;

5. The old switch is removed, and the small bright end on the head is the telescopic switch; After installation, check whether the fasteners are in place, whether the sensor is plugged back, and whether there is anything extra.

Red, the reversing lights of a bus are all red, more conspicuous, better to see the reversing.

There is no fixed standard for this, you can hang the reverse gear from the reversing bulb to take the mu key to find the power cord of the reversing light, or the car test light pen, open the key to hang the reverse gear measurement to know which one is the reversing light wire. The reversing lights are installed at the rear of the car to illuminate the road behind the car and warn the vehicles and pedestrians behind the car that the car is reversing, and the reversing lights are all white. Automobile reversing lights, installed at the rear of the car, are used to illuminate the road surface behind the car when reversing, and play the role of warning vehicles and pedestrians behind the car.

The model is different, the color of the line is also different, the easiest way is to remove the rear cover of the taillight, hang the reverse gear, see that the bulb is bright, the line behind the bright bulb is the reversing light line, the working principle of the reversing light switch:

1. It is a normally open switch (often disconnected) to know the coincidence, when the reversing light switch is hung in reverse gear, the mechanical mechanism will press down the contact of the switch;

2. Then the circuit will be closed, the reverse gear will be lit up, the reverse gear prompt sound will sound, when the reverse gear is disconnected, the switch contact will bounce up, and the reverse gear light circuit will become disconnected again;

3. The reversing light switch of the general tractor is installed on the transmission, and the reversing light switch is triggered by the pit on the transmission lever.

There is no fixed standard for this, you can hang the reverse gear from the reversing bulb to find the power cord of the reversing light, or the car test light pen, open the key to hang the reverse gear measurement to know which one is the reversing light live line. The reversing lights are installed at the rear of the car to illuminate the road surface behind the car and warn vehicles and pedestrians behind the car that the car is reversing, and the reversing lights are all white. Automobile reversing lights, installed at the rear of the car, are used to illuminate the road surface behind the car when reversing, and play the role of warning vehicles and pedestrians behind the car.

The speed limit for this car is generally colored. Green and white. There are three kinds of green and white. The wire is usually brown or black.

1. Turn signals and parking lights.

As long as the ignition is on, turn the lever to the corresponding position of the steering or parking light, and the corresponding light can be flashed.

How to use the left turn signal: Turn the left turn signal on after moving the lever down.

How to use the right turn signal: Just lift the control lever to turn on the right turn signal.

Gently and firmly toggle the turn switch, and the corresponding turn signal flashes three times.

2. High beam and high beam instantaneous on-on function.

Move the joystick to the appropriate position:

How to use the high beam: After the low beam is turned on, push the control lever forward to turn the high beam on.

High beam instantaneous switching function: also known as high and low beam alternation, you only need to pull the light lever in the direction of the driver to complete a high and low beam alternation.

In the instrument cluster, you can see the high beam symbol light illuminating.

3. Turn on the fog lights.

Different from German models, the front and rear fog lights of this car are controlled by the light operating lever**, and the operating lever can be rotated to the corresponding position.

4. Automatic headlights, low beams, and wide indicator lights.

When the auto button is on, the automatic headlights are on. Rotate the button in turn to turn on the wide light, automatic headlight, and low beam in order.

The adaptive headlights can be adjusted according to the vehicle speed and steering angle. The adaptive headlights recognise the steering angle when the vehicle is cornering and turn on when a certain value is exceeded. At the same time, the speed of the vehicle must not exceed 70 km/h in order to be recognized by the system.

Some high-end models will also install light intensity sensors in the headlight system, which will automatically switch to low beam when identifying oncoming vehicles, effectively avoiding the dazzling of the opposing driver.

Trent only has one brake light. The reason is that according to national regulations, vehicles with a length of less than 6 meters need to be installed with one, and the other can be installed as an option. Due to the mandatory installation of one by national regulations, many manufacturers have reduced the number of other reversing lights on the basis of meeting national regulations.

In China's current "GB4785-1998 Automobile and Trailer Exterior Lighting and Signal Device Installation Regulations", the number of reversing lights is one or two. Obviously, there is no mandatory requirement for the number of reversing lights in the regulations, one can do it, and two can also do it.

For car companies, it is necessary to consider not only the manufacturing cost, but also the aesthetics of the car design. Sometimes having an extra reversing light not only increases the manufacturing cost, but also affects the aesthetics of a car, which is counterproductive.

As mentioned above, it is legal to have one and two reversing lights. It's just that in terms of cost, manufacturers naturally don't need to increase their own costs in vain. In addition, consumers' demand for two reversing lights is not high, and they will not give extra points because there are two reversing lights in the car, and sales will increase greatly, so there is no need for manufacturers to work two reversing lights.

In fact, only bright car reversing lights can attract the driver's attention more, and symmetrical lights will make the driver paralyzed, mistakenly thinking that the car in front is going backwards.

In addition, the position of the reversing lights is not random, usually the left fog early hitch light and the right reversing light. This is because the driver's seat in China is on the left side, and the fog lights on the left side can better observe the vehicle in front. While the reversing light is on the right, it is convenient for the driver to stop on the right side of the road at night.

Millions of car purchase subsidies.