What kind of oil pressing machinery is used by large oil press manufacturers Luhua oil pressing

1. Hydraulic oil press.

The hydraulic oil press is a traditional small oil press, and the production process is intermittent. The process is characterized by low operation technical requirements, high oil yield, and high crude oil, but the labor intensity is large. The applicable occasions of the hydraulic oil press are:

The processing capacity is small, the production is small, and the daily processing capacity of a single unit is about 1 ton.

2. Screw oil press.

The fully automatic screw press is an oil press that can operate continuously. The technical characteristics are: low operation technical requirements, high oil yield, poor crude oil quality compared with hydraulic oil press, and labor intensity lower than that of hydraulic oil press.

The automatic screw press is suitable for small processing capacity, small workshop production, and the daily processing capacity of a single machine is about 2-8 tons.

3.Large and medium-sized screw oil press units.

The screw oil press unit is suitable for large and medium-sized, continuous and large-capacity oil plants. The technical characteristics are: continuous production, low labor intensity, and high oil yield.

The equipment of a single oil press is about a few thousand yuan. If it is an oil press production line, it will probably range from tens of thousands to hundreds of thousands of yuan. If you want to do a small oil processing plant, you can use a small oil press production line, which will have a higher degree of production efficiency and automation.

However, if it is a self-employed workshop, the output is generally not high, and you can choose a smaller fully automatic oil press.

Basic production processes and key control links.

1) Basic production process.

1. The process of oil production by pressing and making oil.

Take peanuts as an example: clean, peel, crush, roll, steam, frying, and squeeze peanuts** (crude oil).

2. The process of leaching oil production.

Take soybeans as an example: cleaning, crushing, softening, rolling, leaching, evaporation, stripping, soybean** (crude oil).

3 Oil refining process.

**(Crude oil) Filtration, hydration (degumming), alkali refining (deacidification), decolorization, deodorization, refined oil.

2) Key control links.

Alkali refining, deodorization.

3) Prone to quality and safety problems.

1.The acid value (acid value) exceeds the standard.

2.The peroxide value is exceeded.

3.The amount of solvent residue exceeds the standard.

4.The heating test item is unqualified.

3. Necessary production resources.

a) Production site.

Enterprises should be built in areas free of harmful gases, soot, dust, radioactive substances and other sources of diffuse pollution. The plant design of edible vegetable oil production enterprises is reasonable and can meet the requirements of the production process. The different nature of the premises of the enterprise can meet the respective production requirements.

The plant has sufficient space to facilitate the storage and transportation of equipment and materials, sanitation and personnel passage.

Roads in the factory area should be paved with concrete, asphalt and other hard materials that are easy to clean to prevent water accumulation and dust.

Plants and facilities must be strictly protected from the invasion and concealment of rodents, flies and other pests.

The production area (raw material warehouse, finished product warehouse, processing workshop, etc.) should be separated from the living area.

2) Necessary production equipment.

1. Enterprises engaged in oil production by crushing should have: (1) screening equipment; (2) Crushing equipment; (3) Softening equipment; (4) Blank rolling equipment; (5) Steaming and frying equipment; (6) Pressing equipment; (7) Shelling equipment (oil varieties that need to be shelled); (8) Other necessary auxiliary equipment.

2. Enterprises that adopt leaching method for oil production should have: (1) screening equipment; (2) Crushing equipment; (3) Softening equipment; (4) Blank rolling equipment; (5) leacher; (6) evaporator; (7) stripping tower; (8) Evaporator; (9) Other necessary auxiliary equipment.

3. Oil refining equipment: (1) filtration equipment; (2) Degumming equipment (oil refinery, centrifuge); (3) Alkali refining equipment (oil refinery pan, centrifuge); (4) Decolorization equipment (decolorization tower); (5) Deodorization equipment (deodorizer); (6) Dewaxing equipment (when dewaxing is required); (7) Packaging equipment; (8) Other necessary auxiliary equipment.

The listed production equipment should be configured according to the needs of the production process design.

Grease production equipment can be found in "Xinxiang Hongyang Grease Equipment****".

To buy, including a full set of oil refining equipment, or to design and configure for you according to your needs, you can search for the company "Xinxiang Hongyang Oil and Fat Equipment" on the Internet**, see their product information, and then discuss in detail.

I also want to set up an oil workshop, add 844194412, and study it together.

Sorry, I don't know much about this.

From oil to edible oil, it is generally necessary to pretreat oil (different oilseeds require different equipment, such as peanuts need shelling machines), pressing equipment, refining equipment, etc. Different devices are needed.

Take sunflower oil as an example, there are three kinds of edible oil processing plant processes, hot pressing, cold pressing and leaching process, and large-scale ones mostly use hot pressing or leaching process;

Sunflower seeds, shelling machine, shell kernel separation, steaming and frying in a wok, oil press pressing, filtration, hot pressing crude oil, going to the refining workshop.

Sunflower seeds, hulling, shell kernel separation, oil pressing, filtration, cold pressed oil, going to the refining plant.

Pre-pressing process: sunflower seeds, cleaning, shelling, shell kernel separation, embryo pressing, steaming, frying, pre-pressing, crude oil.

Leaching process:

Solvent Solvent**.

Sunflower Seed Cake Leacher Mixed Oil Treatment Crude Oil.

Solvent** Wet meal evaporation Finished meal.

Crude oil, hydration and degumming, alkali refining and deacidification, adsorption and decolorization, high temperature deodorization, winter dewaxing (optional) Refined oil.

The main equipment of the refining section; Refining tank, decolorization tank, deodorization tank, steam generator, heat conduction oil furnace, vacuum pump, filter, etc.

Large, how much production, what oil is produced?

All I know is that I need to use an inkjet printer. Hehe.

Hello, the small oil mill specifically uses a small oil press, or a large oil press. It depends on the size of the mill and the type of crop being pressed.

Generally speaking, if the amount of work such as pressing peanuts, sesame, rapeseed, and oil sunflower is not large, you can choose a medium-sized and small machine, such as a 100 oil press.

If the workload is relatively large, or the soybeans, cottonseeds, etc. are mainly pressed, and other oil crops are supplemented, you can choose: 120 oil press or 130 oil press.

How much does an oil press cost?

The above models of oil presses are about 2-30,000 yuan, depending on the specific model and specific configuration.

Taking peanuts as an example, the peanut edible oil production line is mainly composed of pretreatment equipment, oil extraction equipment, refining equipment, and filling equipment, which is divided into hot-pressed peanut oil production line and cold-pressed peanut oil production line according to the process.

Peanut screw oil press cold pressing process.

Selected peanut kernels--cleaning and impurities--quenching and tempering--cold-pressing--cold-pressed crude oil--coarse filtration--filtration--crude oil.

Cold-pressed peanut oil equipment consists of: peanut shelling machine, cold-pressed screw oil press with feeding device, vacuum filtration, centrifugal oil purifier.

Peanut screw oil press hot pressing process.

Raw materials - hulling - crushing - embryo pressing - steaming and frying - pressing - filtration - crude oil.

Hot pressed peanut oil equipment consists of: peanut shelling machine, drum wok, screw feeder, hot screw oil press, vacuum filtration, centrifugal oil purifier.

Peanut oil refining and filling process.

Peanut crude oil, deacidification, degumming, washing, drying, decolorization, deodorization, filling.

The cost is affected by factors such as process selection, capacity size, configuration choice (carbon steel or stainless steel), etc., and cannot be said in a single word.

There are many brands of oil presses, if you have a large machine, you can use grease equipment, and a small production line invests 20,000 or 30,000 yuan in a set of equipment.

How much raw material is processed when needed?

Aishang kitchen brand automatic small molecule household oil press. It looks like a magic box. As a second-generation aircraft, such a price point is more reasonable.

Chuangmin oil press, used really good, their service is good, the quality of the machine is excellent, the warranty is one and a half years, the real free warranty is one and a half years, other other businesses are warranted, in fact, everything is charged much better.

This depends on the local **, a Daewoo large oil press costs about 30,000 yuan.

Are you looking for edible oil extraction equipment? How to contact and send you the device information.