How should hydroponic plants be raised? Tap water or plain water?

Hydroponic greens use plain water, others are not right. Plant roots are in water and are the things that need oxygen, i.e., liquid dissolved oxygen.

Without oxygen underwater, plant roots do not grow well, which can cause lesions and rotten roots. Boiled water is a natural water rich in water-soluble oxygen, which is heated to 100 by high temperature, and then all the water-soluble oxygen in the water escapes, and the water-soluble oxygen drops to 0. In addition, natural water contains a lot of minerals such as calcium and magnesium, which turn into sediment at high temperatures and form dirt on the walls of the pot and are lost.

Therefore, boiled water does not contain water-soluble oxygen, which loses the minerals needed for plant growth, making it unsuitable for hydroponic plants.

Tap water for sunbathing is strictly not suitable for hydroponic plants. Water is exposed to sunlight, but the water absorbs part of the radiant heat of the sun, raising the water temperature and helping plants to grow and develop. But when producing tap water from tap water, bleach is added.

Kills most of the harmful viruses, germs and aquatic organisms in the water, and the water contains a large amount of calcium hypochlorite.

It makes the water alkaline, which is not conducive to the normal growth and development of most plants.

So what kind of water is suitable for hydroponic plants? Natural.

The natural water is best suited for hydroponic plants. Because the water in the natural environment can dissolve the abundant water-soluble air, it is suitable for the ventilation of the roots of hydroponic plants, and avoids poor growth caused by insufficient oxygen and root diseases. In addition, natural water dissolves a variety of minerals such as nitrogen, phosphorus, potassium, calcium, magnesium, zinc, iron, and copper that plants need on the earth, which contributes to the normal growth and development of plants.

Everyone who raises flowers has a different approach. Her method may not be suitable for you to raise flowers, but on the way to slowly pondering, you can study your own methods of raising flowers and raise them better and better. That flower recently saw a lot of flower friends like hydroponic plants. Jing chips have come out a lot of bugs in the past, <>

Whether it is dry tap water or boiled water, hydroponic plants can be used. When Hua first started to make waterscape plants, he used tap water for basking in the sun, and there was a special bucket for boiling water at home, which was installed in advance every time, and the water was changed for the plants at home after a period of sunbathing, but after spending a while, he found that the tap water for basking in the sun may also become a problem.

Hydroponic plants should be placed in a place with sufficient water and sunlight, and should be cooled with boiled water before breeding, because tap water contains a lot of C L ions, which are harmful to plants.

You can't use boiling water, you must use tap water, you can add some nutrient solution appropriately, wash the roots first, don't overly hurt the roots, and second, prune properly. Old, rotten roots should be pruned, and some flower roots are so lush that they can be pruned 1 3 1 2 to reduce oxygen consumption and promote the occurrence of new aquatic roots. Some flowers have scarce roots and can not be pruned, which is conducive to adapting to the aquatic environment, and the above-ground branches and leaves can be slightly pruned.

Third, disinfect to avoid wound infection.

The best water for growing hydroponic plants is well or spring water, as they contain many minerals and trace elements.

Tap water can be used to grow hydroponic plants, but it is prone to the production of algae.

It is best to keep tap water in a cool and ventilated place for 5-7 days before using it.

Hydroponic plants are convenient, clean, and inexpensive, so they are widely loved by people. Hydroponic plants, as the name suggests, are plants that grow in water. When cultivating hydroponic plants, some utensils are mostly used, such as pots, bottles, jars, etc.

When fertilizing hydroponic plants, it is necessary to pay attention to the differences between their fertilization techniques and those of other flowers. When fertilizing hydroponic plants, it is necessary to pay attention to controlling the amount of fertilizer, as long as it exceeds the concentration of fertilizer that the plant can bear, it will cause harm to them. When planting hydroponic plants, it is necessary to master the cultivation principles of hydroponic plants, apply fertilizer according to the number of water changes, and add a nutrient fertilizer after the water change, mainly to make up for the loss of fertilizer during water change.

The common varieties of <> hydroponic plants are as follows: Guanyin dripping water, spider plant.

Sweet potato, rich bamboo.

Green radish, copper coin grass.

Purple bamboo plum. The suitable growth temperature of hydroponic plants is above minus 5 degrees and below minus 30 degrees. In other words, as long as people feel comfortable, plants will feel comfortable and can grow normally.

Even in winter, they thrive and energize us. In general, plants do not have to be exposed to the sun as long as they are grown with proper light. In summer, direct sunlight should be avoided as much as possible.

Nutrient solution. Generally, you can use the special nutrient solution for hydroponic plants sold on the market to prepare the appropriate concentration according to the instructions. When preparing, tap water should be left for two hours to half a day, and its temperature should be close to room temperature, and chlorine gas should be in the water.

After volatilization, the concentrated nutrient solution is added in proportion to become the nutrient solution of hydroponic plants. To change the water is to change the water with the nutrient solution in the bottle. In general, the water is changed every 5-10 days in spring and autumn; Change it every 5 days or so in summer; Change the water every 10-15 days in winter, and remember to add the nutrient solution every time.

Hydroponic plants can be used directly with tap water. Because tap water contains some active substances that are also very nutritious, which can also better provide nutrients to these plants, if it is sun-dried tap water, these minerals and nutrients will be given to it, and it will feel more nutrient-free.

It is best to use well water, spring water or groundwater. It is best not to use sun-dried tap water, which is suitable for watering flowers, because it is easy to grow algae, and tap water is connected to a container and left in a cool and ventilated location for 5 to 6 days, which is most suitable for hydroponic plants.

Use water in the natural environment and add some nutrients . It is not recommended to use sun-dried tap water, which is generally added with bleaching powder, and the water contains calcium hypochlorite, which makes the water alkaline, which is not conducive to the growth and development of most plants.

It is necessary to use well water or spring water, which contains the most dissolved oxygen and the most mineral trace elements. Do not use sun-dried tap water, after the sun has a low amount of dissolved oxygen, which is not conducive to plant growth.

Tap and purified water can be used for hydroponic plants, as well as sun-dried water, but the temperature should not be too high. However, if the water temperature is too low, it is not acceptable, and it needs to be left for a while below the indoor temperature before use.

Clean water is fine, tap water should be put outdoors for a day before use, the water should not be too much, and a certain root needs to be retained in the air. If conditions permit, an appropriate amount of nutrient solution on the market can be added.

Hydroponic plants need to use tap water, but it is better to leave the tap water for a period of time, which will be better, and not to use the sun-dried tap water, so that the water quality is varied.

I think it's okay to use sun-dried tap water, my family uses sun-dried tap water, and the plants grow very well.

Purified water for hydroponic plants will do. Do not allow tap water to grow algae.

Using sun-dried tap hydroponic plants will be a little better than plain water, which neither contains aqueous dissolved oxygen, but also loses the minerals needed for plant growth, making it unsuitable for hydroponic plants. The water is exposed to sunlight, but the water absorbs part of the radiant heat of the sun, which makes the water temperature rise, which is conducive to the growth and development of plants. However, when tap water is produced in the water plant, bleaching powder is usually added to kill most of the harmful viruses and aquatic organisms in the water, and the water contains a large amount of calcium hypochlorite, which makes the water alkaline, which is not conducive to the normal growth and development of most plants.

Strictly speaking, it is neither suitable for boiled water nor tap water, and the most suitable is natural water in the natural environment. Because the water in the natural environment dissolves the abundant water-soluble air, it is suitable for the root ventilation of hydroponic plants to avoid the occurrence of poor growth and root diseases due to lack of oxygen.

It is enough for ordinary hydroponic plants to use dried tap water as a medium, but be careful not to expose to the sun as much as possible, and put it in a cool place to disperse the chlorine.

Hydroponic plants need to use tap water, not plain water, because most of the bacteria in boiled water have been killed, resulting in a lack of oxygen in the water, and the plants cannot grow normally.

It is better to use sun-dried tap water, because tap water contains a variety of minerals, and it is also very beneficial to the absorption of nutrients from hydroponic plants.

Many flowers can be grown hydroponically, such as Monstera, Hulk, Alocasia, etc. Duck plantar plants such as Bamboo, Plum, etc.; There are also lily flowers that can adapt to hydroponic conditions, such as aloe vera, spider plant, tiger tail orchid, agave, Phnom Penh, rich bamboo, auspicious grass, etc. The lotus palm and hibiscus palm of the sedum family are also good choices.

In addition to the requirements of light, temperature and humidity, hydroponic flowers are exactly the same as those of soil cultivation. The requirements for water, fertilizer and oxygen are very different in management.

Water, domestic hydroponic flowers should use soft water as the water source, and tap water that meets national standards can generally be used. The tap water is filtered, precipitated, sterilized, cleaned and hygienic, and the pH is below 7, which can be used to cultivate hydroponic flowers with confidence. You can take some tap water and leave it in the basin for a while, and you can use it with confidence.

Fertilizer, domestic hydroponic flowers must use a low-concentration special nutrient solution based on nitrate nitrogen fertilizer. Hydroponic flower nutrient solution generally contains all the nutrients necessary for the growth of flowers, the ratio of various elements is balanced, the inorganic salts are in an ionic state, which is used in different flower varieties and the needs of nutrients at various stages of growth and development, and the non-toxic and harmless pH is appropriately conducive to nutrient absorption.

Oxygen, domestic hydroponic flowers, water is in a static state, dissolved oxygen is low, if flowers are barely sustained in oxygen-deficient vessels, it is common for its roots to grow in reverse, stretching to the liquid surface in order to breathe more oxygen, so it is necessary to improve the oxygen content of hydroponic nutrient solution for the normal growth of flowers, and it is particularly important in summer.

There are several simple and easy ways to increase dissolved oxygen:

1.Increase the number of nutrient solution changes.

2.Vibration to increase oxygen, one hand to fix the flower plant, the other hand to grasp the vessel and gently shake more than ten times. The dissolved oxygen content of the nutrient solution after shaking can be increased by about 30%.

3.Add appropriate solid oxygen or 1% hydrogen peroxide (3% hydrogen peroxide) to the nutrient solution

4.A miniature submersible pump or aeration avalanche is used to waterfall the nutrient solution. In such an environment, the plant roots receive sufficient oxygen, and the respiration is very vigorous, which promotes the vigorous growth of flowers.