Can dry leaves be mixed directly into the soil as base fertilizer?

Not advisable. Because dead leaves belong to organic matter that has not been fermented, if there is too much, fermentation can produce high temperatures, resulting in burns.

Plant roots. A small amount is OK. But you can pile up the leaves, drench them with water and dung to ferment them thoroughly, which is the best organic fertilizer that can achieve your idea.

No problem, mix well and evenly, no accumulation, it's okay; Stacked together, it is feared that the roots of the plant will be burned by high temperatures during fermentation. Dig a pit and use it better after it rots.

If this doesn't work, the heat will burn the roots of the flowers, so it must be mixed with soil after rotting.

You can pile the leaves together, pour some water, cover with plastic sheeting, seal them, and then ferment them just in the spring of the next year, and you can mix the soil and plant Laiyang flowers.

Same problem waiting for the masters.

<> leaves can be turned into fertilizer when buried in the soil.

Different leaves decay at different rates, generally taking up to 4 months. Moist soil tends to allow leaves to rot because there are more bacteria and microorganisms in moist soil; Acidic soils also decay faster. Most leaves can be used as natural fertilizers after decay, which can promote plant growth and improve plant resistance, and is a more effective and environmentally friendly fertilizer.

Leaves are the trees that carry out photosynthesis.

parts. Leaves can come in a variety of different shapes, sizes, colors, and textures. The leaves can be clustered together or scattered all over the place.

The edges of the leaves can be smooth or jagged. A complete leaf consists of three parts: leaves—mostly broad and flat, suitable for sunlight.

Petiole – supports the leaf and connects the leaf to the stem. Leaf support – protects young leaves.

Dry leaves are used as fertilizer.

Dried leaves can be used as fertilizer, mainly because they are rich in elements such as potassium, phosphorus, nitrogen, and trace elements. If decomposed into flower fertilizer, they can supplement the deficiency of trace elements in the soil, loosen the soil and increase air permeability. Dry leaves cannot be directly used as fertilizer, they need to be decomposed in advance, that is, fermented, because if the litter is placed directly in the pot, it will become sick if it ferments and rots by itself, so it is best to ferment the litter by yourself, and then it can be used as flower fertilizer.

How to make fertilizer for dry leaves.

Method 1: Dig a pit about 30 cm deep in the pot, put the dried leaves in the pit and water it. You can mix some slow-resistant fertilizer or chemical fertilizer appropriately, water the leaves until they are soaked, and then bury them in the soil.

After about six months, they can be used as fertilizer for growing flowers. Method 2: Prepare a flower pot with a diameter of more than 20cm.

The bottom is covered with leaves, bark, twigs, etc. The surface is covered with a thin layer of soil. If you plant flowers, you can cover the soil a little thicker, and the tree will not burn its roots.

Place on a balcony or terrace. After a few months, it will become a very fertile fertilizer. Garden soil, leaf residue, and old potting soil can be mixed together, which is a good soil for planting vegetables.

It is fertile, nutritious, and safe. Dried leaves can be turned into organic fertilizer, which protects the environment and improves soil quality. Anything is suitable for planting and can grow well.

Key points for the use of fertilizer for dry leaves.

If the number of dried leaves is small, you can cut them into small pieces and bury them directly in the pot. If there are many dry leaves, they cannot be spread out and used directly. They need to be decomposed in advance, otherwise the dead leaves will accumulate a lot of heat in the process of natural decay, and the consequences for the plant can be imagined.

And if there are bacteria on the leaves, it can also affect the growth of the plant.

<> foliar fertilizer can be watered in the soil, but the effect is smaller than that of Liang Chan, and it is easy to cause waste. Foliar fertilizer refers to the foliar fertilizer for the purpose of foliar absorption, the nutrients required by the crop are directly applied to the foliar fertilizer, usually when used are prepared into a solution after the potato, evenly sprayed on the leaves, has the advantages of fast absorption, low dosage and high efficiency.

Leaves can be used as fertilizer, but it is generally not recommended to use leaves as fertilizer directly, so that its fertilizer effect is not good, and the plant can only be maintained after fermentation, so that the soil of the plant has a good ability to retain water and fertilizer. Leaves are a relatively cheap and readily available fertilizer, and can generally be used to care for most plants.

Leaves are used as fertilizer.

Leaves can be used as fertilizer, but it is generally not recommended to use leaves as fertilizer directly, so that its fertilizer effect is not good, and the plant can only be maintained after fermentation, so that the soil of the plant has a good ability to retain water and fertilizer.

Leaves are generally more suitable for flower fertilizer, and leaves are relatively cheap and easy to obtain fertilizer, so it is very suitable for maintaining plants, and it can generally be used to maintain most plants.

How to make fertilizer for leaves.

1. When using leaves, you should first put them in the sun to fully decay, otherwise they will burn the plant if they are placed directly in the soil.

2. After the leaves are fermented and rotted, they can be fully mixed with the soil, which is conducive to promoting the rapid growth of plants.

Leaf fertilizer use Chang grip point.

1. Usually we should pay attention not to water too much water when using leaf fertilizer, otherwise it will lead to stagnant water in the roots of plants, which is not conducive to the growth of plants.

2. Generally, when using Hubi leaf fertilizer to maintain the plant, you can add some light to it at the same time, which can not only make the plant grow rapidly, but also make the nutrients quickly absorbed.

OK. The leaves of some trees can be used as pesticides. For example, ginkgo biloba leaves contain benzylic acid and gluliul, and it can be smashed and soaked in juice spray to control aphids, cabbage worms, poisonous moths, cicadas and other pests;

The sun-dried and ground powder of ginkgo biloba leaves can be applied to the soil, which can effectively control grubs, ground tigers, needleworms, etc. The leaves of peach trees, arborvitae and elm trees can also be used as pesticides, soaked juice spray or sun-dried grinding powder and applied to the soil, which has the advantages of high efficacy, low cost, no harm to natural enemies of pests and no pollution of the environment.

Dry leaves can be used as fertilizer, mainly because they are rich in potassium, phosphorus, nitrogen and other elements and other trace elements, but can not be used directly, need to be decomposed in advance, otherwise the dead leaves will gather a lot of heat in the natural decay process, burn the root system of the plant, rotten words can be used as flower fertilizer, supplement the lack of trace elements in the soil, but also Bi Socks can loosen the soil, increase air permeability.

Dry leaves are used as fertilizer.

Dry leaves can be used as fertilizer, mainly because it is rich in potassium, phosphorus, nitrogen and other elements and other trace elements, if it is decomposed as flower fertilizer, you can regret to supplement the lack of trace elements in the soil, but also loosen the soil, increase air permeability.

Dry leaves can not be used as fertilizer directly, they need to be decomposed in advance, that is, fermented, because if you put the dead branches and fallen leaves directly in the pot, it will ferment and rot by itself, and diseases will occur, so it is best to ferment the dead branches and fallen leaves yourself, which can be used as flower fertilizer.

How to make fertilizer for dry leaves.

Method 1: Dig a pit about 30 cm deep in the pot, put the dry leaves into the pit, water it, you can mix some organic fertilizer or chemical fertilizer appropriately, water it to make the leaves wet, and then bury it in the soil, which can become fertilizer for raising flowers after about six months.

Method 2: Prepare a flower pot with a diameter of more than 20 cm, the bottom is covered with leaves, bark, branches, etc., the surface is covered with a thin layer of soil, if you plant flowers, the soil can be covered thicker, and the trees will not burn the roots, place them on the balcony or on the exposed platform, and after a few months, it will be a very fertile fertilizer.

You can mix garden soil, leaf residue and old potting soil together, this is a good vegetable soil, fertile, nutritious and safe, dry leaves can be turned into organic fertilizer, not only environmental protection, but also improve the quality of the soil, planting anything is very suitable, can grow well.

Key points for the use of fertilizer for dry leaves.

If the number of dry leaves is small, you can directly bury it in the pot after cutting it into small sections, if there are more dry leaves, you can't use it directly, you need to rot in advance, otherwise the dead leaves will gather a lot of heat in the natural decay process, the consequences of the plant can be imagined, and if the leaves have bacteria, it will also affect the growth of the plant.