Why does the ECW M Smart Controller 1250M trip on its own for no reason?

Updated on technology 2024-06-13
21 answers
  1. Anonymous users2024-02-11

    The reasons for the tripping of the intelligent circuit breaker are as follows: One reason may be that the total load is too large, the sub-switch does not exceed the load, and the sum of each way makes the main switch overload trip. The second reason may be that the terminal head of the main switch inlet and outlet line is loose and heated, which causes tripping.

  2. Anonymous users2024-02-10

    The control system senses that the equipment is overloaded, it will trip, and the normal phenomenon can be restored to normal by reducing the load.

  3. Anonymous users2024-02-09

    1. If there is a problem with the intelligent controller, it is easy to trip all the time.

    2. Check the electrical appliances at home again, some electrical appliances are relatively powerful, or at the same time, a lot of high-power electrical appliances are used.

    3. Check whether there is leakage or short circuit in the line.

  4. Anonymous users2024-02-08

    You can only choose the controller, 1250 meters, why will it trip by itself for no reason? It may also be a place with moisture, a place where the current is too large, and it will automatically trip.

  5. Anonymous users2024-02-07

    I think there should be something wrong with this intelligent controller, or there is something wrong with the machine he controls, so she will trip for no reason.

  6. Anonymous users2024-02-06

    This may be a way for him to automatically trip when it reaches a certain voltage, but I just automatically trip when the voltage is unstable to protect myself.

  7. Anonymous users2024-02-05

    This pinyin is not recognized, intelligent measurement and control. Mobile phone one two. 50m why it itself will be for no reason, then you must have a fault, you can't do it for no reason, it's not good, find a professional to show you. If you ask again, you will give the after-sales service **.

  8. Anonymous users2024-02-04

    If this happens, it will generally trip for no reason, so this situation must be dealt with as soon as possible, don't be careless, otherwise something will definitely happen.

  9. Anonymous users2024-02-03

    If you investigate for no reason, it may be the reason why your voltage is not stable.

  10. Anonymous users2024-02-02

    If it trips, it may be that there is something wrong with the line, where the power is short or the power is too large, etc., I think. You still check on the Internet and see what's going on in the product manual, but it's really not okay to ask professional electrical personnel to repair it.

  11. Anonymous users2024-02-01

    Hello, generally speaking, tripping is more than a limit for him, so he needs to trip to carry out a power-off protection. You can check if the wiring in your home is not enough.

  12. Anonymous users2024-01-31

    Hello, it may be that the house is damp and there is a leakage. You check the device.

  13. Anonymous users2024-01-30

    This should be out of order, and it is recommended that you repair it.

  14. Anonymous users2024-01-29

    If the controller is intelligently selected, why does it trip for no reason? If it trips for no reason, it may be broken.

  15. Anonymous users2024-01-28

    Yingxi intelligent controller 1250 meters, why is it called by self-source pollution? This is the main reason with you, the control can control the instantaneous friction during the control, causing him to have no reason.

  16. Anonymous users2024-01-27

    Intelligent controller 11250m why it would itself for no reason.

  17. Anonymous users2024-01-26

    It's the same if you don't chat, and many times you can't do anything but steal.

  18. Anonymous users2024-01-25

    Electronic computer hardware consists of combinators, controllers, memory, input devices, and output devices, and the combinators and controllers are integrated together and are collectively referred to as the CPU processor. Each component of the computer is connected by the bus to form an organic whole, and there are three kinds of microcomputer buses: address bus, control bus and data bus.

  19. Anonymous users2024-01-24

    There are five major components of computer hardware: combinator, controller, memory, input device, and output device.

    Combinator + Controller = Processor (CPU).

    Memory includes internal memory (memory, video memory).

    External memory (hard disk, USB drive, various memory cards).

    Input devices include keyboards, mice, scanners, tablets, barcode scanners, and the like.

    Output devices include monitors, printers, projections, etc.

  20. Anonymous users2024-01-23

    This section explains the sixth lesson of computer knowledge popularization and application: the hardware composition of computers.

  21. Anonymous users2024-01-22

    It should be wrong.

    I think it was controllers, combinators, memory, and I/O devices

Related questions
11 answers2024-06-13

The intelligent street lamp controller adopts the most advanced computer control technology abroad, and calculates the sunrise and sunset time according to the law of the four seasons of the year, and has the function of fine-tuning the switching time, which can adapt to the needs of different geographical environments; It is the best time controller for street lights, advertising light boxes, neon signs, and other devices. The intelligent street lamp controller adopts the most advanced computer control technology abroad, and calculates the sunrise and sunset time according to the law of the four seasons of the year, and has the function of fine-tuning the switching time, which can adapt to the needs of different geographical environments; It is the best time controller for street lights, advertising light boxes, neon signs, and other devices. It adopts liquid crystal display year, month, day, hour and minute, and has a backlight, which is convenient for night observation and operation. >>>More

26 answers2024-06-13

How can a controller be broken? If you don't operate the controller properly, you can break it, so what? When operating, it must be done correctly.

9 answers2024-06-13

Required components: AC contactor, intermediate relay, circuit breaker (air open or knife switch), travel switch, start button, stop button. There are a number of square copper core plastic wires, a float, a metal tube (and the float constitutes a lever), or without a metal tube, with pulleys and nylon ropes. >>>More

12 answers2024-06-13

Product Description: Working power supply: AC220V 50Hz working mode: according to the local latitude and longitude, according to the seasonal changes of the automatic adjustment of the light, off time. >>>More

19 answers2024-06-13

This is generally 60 volts, 72 volts is too big, no.