60 72v universal controller, old controller, but I don t know which two wire mediation wire is 72V o

This is generally 60 volts, 72 volts is too big, no.

The understanding is completely correct, because this controller is 60 72V universal, if you add a battery to use 72V voltage, you must plug in the two wires of the controller.

Sixty is seventy for the universal controller, but it is better to take two wires, the neutral line and the live wire, which are both two and examples.

Ah, if you go under this 60-volt 72-volt universal one, these two plugs can be used casually, after all, the two of them are about the same.

This is through the controller on the controller, but I don't know which two wires to adjust the wire to plug in, I think it should be red and white interchange, I think it's still very good, but we have to ask a professional electrician to condition, I think it's a better way, and they have more professional knowledge, can be safer.

For this kind of general-purpose controller, we want to connect to a 72-volt or 60-volt port. You can first take the 60-volt port to do an experiment to see if the car can drive normally?

Of course, this is the best in the end, because it can be used with both voltages, because it is universal to the controller above.

General controller old controller, but don't know which two wires If such a situation occurs, it is recommended that you do not try it easily, but contact their official after-sales personnel and let them install it, so as to ensure that safety accidents can be avoided.

60 volts, 72 volts, the universal controller is the controller, but not which line to adjust the plug to see the manual.

It's okay to say both, you don't have to post the two of them.

Both of these jacks should be plugged in, so you can plug one in advance, then try it first, and if it doesn't work, then change to another jack.

Its general-purpose controller, if the controller doesn't know which two line conditions, that should be just one of them, you can also do it in the process of insertion, don't measure it.

The general controller is the controller, but I don't know if the line sister is 72 or 60V, you can take a look at the instructions or consult. After-sales is generally more than 72V.

The 72-volt universal controller is the controller, but I don't know whether the gender adjustment is more common to the plug or 60-volt 60-volt and 72-volt, which can be attached.

Sixty this bottle does not recognize seventy-two, this batch is controlled without a universal control machine. I don't know which two lines of adjustment wire docking for eggs, you can find it. The worst, you can find after-sales service, give persuasion service**, or you can consult her, how to install and dock.

Summary. Hello dear, <>

60V controller with 72V battery Need your controller is 60v 72v universal control, a blue switch between high and low voltage wire disconnected for 60v connection is 72 I hope my answer is helpful to you, Finally, I wish you good health and a happy mood! <>

If my answer is helpful to you, please give a thumbs up (rate in the bottom left corner), look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. Finally, I wish you good health and a good mood! <>

The 60V controller is changed to a 72V wiring diagram.

Hello dear, <>

The above ** is the wiring diagram of changing the 60V controller to 72V!

Hello dear, <>

60V controller with 72V battery You need your Bilian's controller is 60V 72V Universal Control Differential , a blue line to switch high and low voltage is disconnected for 60V Connection is 72 I hope my answer is helpful to you, Finally, I wish you good health and a happy mood! <>

If my answer to the question is helpful to you, please give it a thumbs up (comment in the bottom left corner), I look forward to your like, your efforts are very important to me, and your support is also the driving force for my progress. Finally, I wish you good health and a good mood! <>

The steps to reroute this controller are as follows:

1. Open the controller: If the controller unpacks the box, you can see the line, and go directly to step 2.

2. Locate the internal circuit of the controller: After entering the interior, you can see the main wire, motor line, and control line of the controller.

3. Change the connection mode: change the connection mode according to the voltage you need. If you need to connect a 60 volt power supply, you should connect it in series; If you need to connect a 72-volt power supply, you should connect it in parallel.

4. Wiring: According to the changed connection method, connect the wires of different voltages, and pay attention to insulation protection to avoid potential safety hazards such as leakage.

5. Test: After the connection is completed, you need to connect the power supply first, and carry out the corresponding test to confirm whether the controller after the realignment is working normally.

Summary. Hello dear and thank you for your patience. Here is a help you find that not all electric vehicle controllers are universal, because different electric vehicles have different voltages and powers, and different controllers are needed to match.

Generally speaking, 48V, 60V and 72V EV controllers are incompatible, and the corresponding controller needs to be selected according to the voltage of the EV. If you need to replace the EV controller, you need to choose the corresponding controller according to the voltage and power of the EV. When choosing a controller, you need to pay attention to the following:

1.Voltage: The voltage of the controller must match the voltage of the EV battery, otherwise it will damage the controller or EV circuit.

2.Power: The power of the controller must be able to meet the needs of the electric vehicle, otherwise the electric vehicle will not work properly or accelerate slowly.

3.Motor type: Different types of motors require different types of controllers, such as DC motors and AC motors require different controllers.

Is there a 48V, 60V, 72V, universal controller?

Hello dear and thank you for your patience. Here is a help you find that not all electric vehicle controllers are universal, because different electric vehicles have different voltages and powers, and different controllers are needed to match. Generally speaking, 48V, 60V and 72V EV controllers are incompatible, and the corresponding controller needs to be selected according to the voltage of the EV.

If you need to replace the EV controller, you need to choose the corresponding controller according to the voltage and power of the EV. When choosing a controller, you need to pay attention to the following:1

Voltage: The buried voltage of the controller must match the voltage of the EV battery, otherwise it will damage the controller or the EV circuit. 2.

Power: The power of the controller must be able to meet the needs of selling electric vehicles, otherwise it will cause the electric vehicles to not work properly or accelerate slowly. 3.

Motor type: Different types of motors need different types of controllers, for example, DC motors and AC motors need different controllers.

Therefore, if you need to replace the EV controller, Jianjian Liang Kai discussed the consultation draft to call on professionals or EV manufacturers to ensure that the slag selection controller can be compatible with your EV and work properly.

Controller (English name: controller) refers to the main command device that changes the wiring of the main circuit or control circuit and changes the resistance value in the circuit to control the start, speed regulation, braking and reverse of the motor in a predetermined order. Composed of program counters, instruction registers, instruction decoders, timing generators, and operation controllers, it is the "decision-making body" that issues commands, that is, completes the coordination and directs the operation of the entire computer system.

Electromagnetic chuck controller: AC voltage 380V after the transformer step-down, through the rectifier rectification into 110V DC, through the control device into the suction cup, at this time the suction cup is magnetized, demagnetization into the reverse voltage line, the controller to achieve the demagnetization function.

Access Controller: The access controller works in two modes. One is the inspection mode, and the other is the recognition mode.

In patrol mode, the controller continuously sends queries to the card reader and receives reply commands from the card reader. This pattern is maintained until the card reader senses the card. When the card reader senses the card, the card reader produces different replies to the inspection command of the controller, and in this reply command, the card reader transmits the read proximity card internal code data to the access control controller, so that the access control controller enters the recognition mode.

In the recognition mode of the access controller, the access controller analyzes the internal code of the induction card, compares it with the card data stored in the device, and implements follow-up actions. After the access controller completes the action of receiving data, it will send a command to reply to the card reader, so that the card reader can restore the state, and at the same time, the access control controller will return to the inspection mode.