How to tune the sound effect, the best effect of sound adjustment

Try not to cover the microphone pickup area when the speaker is placed, and it is important to control the diffusion angle of the return speaker.

Pop singers should have a thick voice; The national singing voice should be bright, bel canto singing.

Leave him alone. Singing with insufficient confidence plus medium and high frequencies, highlighting his brightness, reducing the low frequency with a lot of confidence, saving the sound from breaking, women adding low frequency sound thick, men plus high frequency sound through, the basic concept is so, you can adjust it according to your own feelings.

The microphone is called minus 200 at low frequency, 630 at medium frequency, 2k5-4k at high frequency, 300-500 for thin sound, 1k for sound air, 4k for sound explosion, 3k for muffled sound, 8k for tooth sound, and 12k-16k for aftersound.

In places with large venues and insufficient sound absorption, the reverberation time of the effects should be short, otherwise the sound will be muddy.

When the male voice sings, the reverberation time should be shorter; The reverberation time of female voices can be longer.

The reverberation time of professional singers should be shorter, otherwise the original timbre will be destroyed; Amateur singers can use longer reverberation times to mask the lack of sound.

How to adjust the sound effect, first of all, you have to adjust the sound effect according to your ****, or the TV TV series, because if some** it comes out, you can hear whether its sound effect is good or not, so you can adjust it.

You can find a professional tuner to help you deal with this, this thing is more professional, and ordinary people can't get it.

For sound effects, you'd better find one and the tuner will tune it for you, which is more difficult.

With the effects of this audio, can you not have a setting in the audio? Just set it up and tune it up.

With this adjustment, you can adjust its volume and so on, all of which must be adjusted to a suitable degree.

The best results of the sound adjustment are as follows:

Subwoofer 20Hz-40Hz: Powerful sound performance with proper tuning. Excessive lifting will make ** cloudy. It is mainly used to control the sound of bass drums, pipe organs and basses.

Bass band 40Hz-150Hz: This is the basic frequency band of sound, which accounts for a large proportion of the entire audio energy and is an important component of the best style. When tuned properly, the bass is moderately relaxed, and the timbre is full and soft; Under-tuning makes the sound performance quite thin, and over-elevating it will make the sound muffled and brightness reduced.

Mid-bass band 150Hz-500Hz: The human voice is in this frequency band. When the debugging is insufficient, the singing voice will be drowned out by the background**, and the voice will appear soft and weak, and it will feel strong and powerful when debugged properly.

Excessive boost can make the bass stiff and affect the clarity of the sound.

The role of sound

The speaker is the terminal of the entire audio system, and its function is to convert the audio electrical energy into the corresponding sound energy and radiate it into the space.

It is an extremely important part of the sound system, because it is responsible for the key task of converting electrical signals into acoustic signals for the human ear to listen directly, and it has to deal directly with the human sense of hearing, and the human sense of stupidity is very sensitive, and has a strong ability to distinguish the timbre of complex sounds.

Because the subjective perception of sound by the human ear is the most important criterion for evaluating the sound quality of an audio system, it can be considered that the performance of the speaker plays a key role in the playback quality of an audio system.

Summary. Hello dear, it's a pleasure to serve you, the effects bass can be tuned in the settings selected in the effects center control screen.

Dear, hello, it's a pleasure to serve you, the effect bass is selected in the effect muffled talk center control screen, and the muffled cover can be adjusted in the settings.

Steps: 1. First, select Settings in the effect control screen. 2. Second, find the sound effect option. 3. It means that after entering the adjustment and selecting the bass quality you like, you can complete it.

How to tune the bass output of the effect.

I can't read English.

Steps to adjust the language:1Enter the "Settings" interface; 2.Find the "Language God Fu Nian" button Hall Mill and select "Chinese"; 3.Press the "OK" button, that is, you can complete the Chinese setting.

2.It is necessary to equalize the effect sound according to different sounds, so that the effect can produce a satisfactory variety of effects, and deal with the proportional relationship between the direct sound of the mixer and the effect sound.

This is mainly related to the way the effects are connected. Either it is connected in series between the mixer and the amplifier, or it is connected to the mixer, or even on a certain signal in front of the mixer.

The above connection method determines the effect and which signal is added to the effect.

If you're adding effects to all the signals, you just need to connect them between the mixer and the amplifier.

If you're adding effects to some of the signals, and the others don't, you'll need to put the effects on the mixer. At this time, the mixer needs to have a group output function, and the input and output interfaces are sufficient.

If you're adding effects to just one signal, you can send that one signal to the effects and then from the effects to the mixer. The mixer is connected to the amplifier.

Sound sources to effects to mixers to amplifiers.

Summary. Effects generally don't have the ability to adjust high and low tones. Effects can't adjust the treble.

The high and low pitch effect of the sound is not only adjusted by theoretical data, but also the collocation of equipment, the difference of venue and sound source will have a great impact on the effect, and it is necessary to adjust the actual sound and personal preferences on the spot. The equalizer bass is set up to the first and third to the left and right, the second up to the left and right, and the fourth to the bottom.

Effects generally don't have the ability to adjust high and low tones. Effects can't adjust the treble. The high and low sound effect of the sound is not only adjusted by theoretical data, the collocation of equipment, the difference of venue and sound source will have a great impact on the effect, and it should be adjusted according to the actual sound and the hobby of the sorrel Sakura on the spot.

The EQ bass setting is as follows: the first and third are up to left, the second is up to left, and the fourth is down.

An effect is an electronic instrument that changes the waveform of the original sound, modulates or delays the phase of the sound wave, enhances the wave component of the sound wave, and produces a variety of special sound effects. The effects include knobs such as level, velocity, depth, and anti-friendly shouting, and are commonly used in DJ player effects, distortion effects, and overdrive effects.

If there was one, and now it is not, then you are not tuned, and of course there is no "reverberation".

The effect is a sound distortion effect used by musical instruments, not a special equipment for audio, although it can do singing reverberation, but only one of the functions is used, and there are many other functions that are wasteful, complicated to operate, and expensive. Generally, audio singing only needs the KTV front-end processor, and there should be no complicated effects to operate.

When using the effect, it is necessary not only to understand the operation method and adjustment steps of the effect, but also to pay attention to the following aspects: First, it is necessary to control the signal level on the mixer, and correctly set the position of the relevant function keys and volume adjustment keys of the mixer. Here's how:

Speak to the microphone and observe the LED level display of the effect, when the maximum value of the input signal shows about 0db, the input signal is moderate, otherwise the volume input key should be adjusted. Because too large a signal can easily cause sound distortion, and too small a signal will reduce the signal-to-noise ratio. The second is to equalize the effects according to different sounds, so that the effects can produce a satisfactory variety of effects.

In addition to the auxiliary output corresponding to the microphone input channel on the mixer, the other auxiliary outputs must be turned off, because the opening of the auxiliary output will cause the sound to be chaotic and unpleasant due to the addition of effects, and there can even be a whine due to self-oscillation. If the mixer's output feels like the effect sound is muddy, you can use the parametric EQ to attenuate the bass component of the effect sound slightly, and when the effect sound is not bright enough, you can slightly increase the mid and high tones (500Hz 5kHz). Third, it is necessary to deal with the proportional relationship between the direct sound of the mixer and the effect sound, the sound of the microphone road is the direct sound, and the sound of the effect road is the effect sound.

The sounds heard at any point in the space can be divided into three parts: direct sound, early reflection sound, and reverberant sound according to the order in which they arrive. Direct sound is the sound that is directly heard by the listener from the sound source, it is the most important part of the sound, which is not affected by the indoor reflective surface in the process of propagation, and is characterized by pure sound quality and dry sound; Early reflections are sounds that are heard after one or two reflections, and too strong early reflections can disrupt the image positioning; Reverberation sound is the sound that arrives after many reflections and diffusion after the early reflection sound, it is related to the volume of the room and the volume absorption of the wall, the reverberation sound causes the sound to cause "ghosting" phenomenon, the appropriate reverberation can make the sound mellow, you may have this feeling, when the room is close to the sound source, the direct sound in the speaker accounts for the main component, and when it is far away from the speaker, the reflected sound accounts for the main component. Knowing these characteristics of the sound, it is possible to reproduce the spatial effect of the sound by adjusting the ratio of the direct sound of the mixer to the effect sound, so that the listener has an immersive feeling.

If there was one, and now it is not, then you are not tuned, and of course there is no "reverberation".

It's that the magnetic speaker is too big