Why can I connect to my wifi? Some mobile phones just can t connect? I can t get through even if I e

1. If the opportunity allows; Restart the wireless router; See if you can solve the problem.

2. In Make sure your phone is within the wireless network coverage range, click "Scan" to refresh the wireless network list.

3. Connect the computer to the router through the network cable and log in to the management interface of the router.

4. In Wireless Settings - Basic Settings, the channel is between 1 and 11, the wireless function is turned on, and the router is restarted.

1. The unsuccessful wireless connection may be caused by incorrect settings of wireless password and other parameters. A new key entry attempt.

2. Please make sure that the wireless router does not have the wireless MAC address filtering function enabled; Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function.

Three: What should I do if the wireless connection is successful and I can't open the web page?

First of all, check whether the router is connected to the external network, log in to the router management interface, and look at the running status - WAN port status, if it is 0, please follow the router quick setup guide to set it again.

2. If the computer can access the Internet, the mobile phone cannot; Check whether the SSID number of the wireless router is in Chinese; If it is changed to letters and numbers; Mobile phones sometimes can't effectively recognize Chinese:

3. If the above cannot be solved: we set a static IP for the mobile phone

4. The wireless router supports between 15-20 wireless devices; When the maximum number of connected wireless devices is exceeded, even though you are connected to Wi-Fi; But you're wireless; At this time, you can unplug the wireless router; Turn on the wireless router after 10 minutes.

Are you satisfied with the above?

There are several scenarios in which the phone cannot connect to Wi-Fi properly:

After turning on the wifi, the wireless network cannot be scanned, and others can search for it. The solution is as follows: 1) The wifi signal is set to hidden, you need to contact the network management to obtain the wireless signal name, and manually enter the wireless signal name and password in the mobile phone [Settings] - [Wireless LAN] - [Other Networks].

Prompt: Connection to wifi is refused, fault phenomenon: others can connect, but you can't connect to wifi, and the connection is refused. The solution is as follows: 1) The router device may have wireless turned on.

The first reason: the password is wrong, please double-check that the password is entered correctly. Unless the restriction is lifted, your mobile device will not be able to connect to the wifi network signal normally.

There are several scenarios in which the phone cannot connect to Wi-Fi properly:

1. Confirm that the password has been entered incorrectly.

Symptom: The password is incorrect, the message is rejected, and the network cannot be connected.

Here's how to fix it:

1) Check whether the password is entered incorrectly or the characters filled in are case-sensitive, and the number of digits entered in the password is too long or too short.

2) There are too many wireless network users connected, try to connect later.

2. Prompt: Connecting to wifi is rejected.

Fault phenomenon: others can connect, but you can't connect to wifi, and the connection is refused.

Here's how to fix it:

1) The router device may have enabled wireless MAC address filtering, it is recommended to contact the NMS to add the MAC address of the mobile phone. The MAC address is viewed in [Settings] - [About This Mac];

2) If the router is faulty, try to restart the router.

3. The mobile phone is connected to wifi and prompts that it has been saved but cannot be connected.

Symptom: The Wi-Fi connection prompt on the mobile phone has been saved, but the connection fails.

Here's how to fix it:

1) This prompt indicates that the encryption method, password or signal channel of the router of the wifi signal has been modified. It is recommended to reset the password and encryption type of the router, and the terminal connected to this network needs to [Ignore this network], and re-enter the password to connect.

2) If the router is faulty, try to restart the router.

Try it with the master key and enter the password link.

Reasons and solutions for mobile phone wifi connection failure:

The wireless router is not responding. Restart the wireless router and connect the phone to the wifi again;

The password for logging in to the wifi is incorrect. Log in to the wireless router and confirm the wifi password you set;

The wifi signal received by the phone is weak. Move the phone to a place close to the wifi transmitter for wifi connection;

The phone wifi function is not responding. Restart your phone and make a wifi connection;

Networking restrictions are carried out inside the wireless router. Log in to the wireless router to see if the MAC address has been restricted from connecting to the Internet, and if there is a restriction, you can remove the restriction.

Look at the wireless password set on the router, then "don't save" it once on your phone, and then re-enter the password to connect.

Maybe you changed your password yourself, or you don't have any money.

Try a few more times, sometimes I've come across this phenomenon.

Ignore the network and log back in.

It's as simple as changing the password to 123, let's test it, and if you can connect, congratulations, you can continue to read on.

In general, this situation is mostly a password error (don't worry, look down slowly), I have also been tormented by this problem for a long time, the situation is basically the same, it shows that the IP address is being obtained, or it is scanned again, and then it is disconnected, it has been deactivated, and it can't be connected, but the password is indeed correct, will your password be wrong? It's not stealing other wifi.

Strange, what's the problem? I'm also puzzled.,It wasn't until the last time,I stumbled upon it.,The problem may be in the input method!!

When entering the password, the input method is in Chinese, which seems to be the correct password, but it cannot be connected. Later, I switched to English and entered the same password again, and it was immediately connected. Problem solving.

I have characters like () in my password, and later I found out that the parentheses of the Chinese status and the parentheses of English are still a little different, and the wifi just doesn't recognize it. It turns out that I changed the input status to English, and the same password can be connected.

The router and wifi are not easy to use, and the settings are generally wrong

If you didn't enter the Lingpei password incorrectly, just set it up again, and the steps are:

1.Turn on the power supply, and then plug in the network cable, plug in the WAN port (generally the blue port), and then connect with the computer network cable on which LAN port to plug in, after doing these jobs, then you will see that there is an address and account password behind the road ruler Dan only by the device, after connecting, enter the address you see in the router in the browser, generally of course, if your home is using ** online network, then you have to prepare an additional modulation modem, commonly known as "cat").

2.Then enter, enter the corresponding account and password, generally the new ones are admin

3.After entering the operation screen, you will see a setup wizard on the left, Attack on the entry (usually it pops up automatically).

4.Click Next, enter the Internet access method settings, we can see that there are three Internet access options, if your home is dial-up, then use PPPOE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer.

The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP. I chose PPPoE because I dialed.

5.If you choose PPPOE dial-up Internet access, you need to fill in the Internet account and password, which should be understood by everyone, and there will be an account number to open broadband, and it is OK to fill it in!!

6.Then the next step is to enter the wireless settings, we can see the channel, mode, security options, SSID, etc., generally SSID is a name, you can fill in casually, Chi Da and then the mode mostly uses 11BGNFor wireless security options, we need to choose WPA-PSK WPA2-PSK, which is so safe that it will not be hacked and rubbed by the network.

I hope mine is helpful to you, and if in doubt, please keep "following up"!

Either the signal is not good, or the password is changed ......

Method 1 1

Turn on the iPhone settings function to enter, and then enter the wireless wifi that is already connected but can't go online.

2After entering, we choose to turn off the wireless wifi first and then turn it on, try it, sometimes you can directly solve the problem of not being able to access the Internet.

Method 2 also enters the window that has been connected to WiFi, and then clicks the small arrow behind it to come to the WiFi information interface.

Let's click Ignore this network and confirm the overlook.

After ignoring it, we will choose to rejoin the wireless wifi we just want to access in the settings. Fill in the password to join.

At this time, it is generally possible to connect to wifi and surf the Internet normally.

When the above settings have been successfully set up and still can't access the Internet, then we choose to restart the router, because resetting may make the phone unable to recognize the network. Restarting your router allows your phone to sync with your router's network.

1.Ask the local "network administrator" to set up the wireless router and whether the DHCP function is enabled;

3.Set a static IP address on the mobile phone;

4.Change to another router or try to connect wirelessly;