What are the misunderstandings of baby s bottle cleaning that need to be paid attention to?

Wash with 100 degrees boiling water and rub the nipple vigorously. Water above 80 degrees Celsius can be sterilized. Rubbing too hard can cause the nipple to break.

The first is to rinse directly with water, wash the lid, and then disinfect the baby's bottle, the baby's bottle should be cleaned every time with cleaning agent to the nipple, lid, edges and corners, and then use a special small pot, an appropriate amount of steaming, and finally be sure to dry, or wipe dry.

Many mothers think that as long as they rinse it with water, they can clean the baby's bottle. In fact, it will breed a lot of bacteria in the long run, so be sure to use a special bottle cleaning solution, and regularly boil it in the water.

After the bottle is used, if the bottle is not cleaned in time, the milk is washed directly with water, and the nipple is not cleaned, and the oil in the milk is easy to adhere to the bottle, forming milk scale, which increases the difficulty of cleaning.

The first misconception is to use very hot water to scald, then the bottle will be burned, and the cleaning is not very clean, the second misconception is to clean the bottle, use too much dish soap, so it will not be good for the child's body.

When cleaning the bottle, you must pay attention to cleaning it with a bottle brush, and at the same time, you must also use a special cleaning agent for infants to clean the bottle, so as to ensure that the child can drink milk powder healthily。In fact, many parents think that as long as the bottle is cleaned in a timely manner, it is enough to wash the cup as usual. However, the wrong way to clean the bottle can also cause bacteria to enter the child's body.

It is important to know that the bottle will contain milk after use, and there are many lipids in the milk. If you only use clean water, it is difficult to dispose of the oil. <>

If the detergent, especially the grease on the plastic bottle, is piled up for a long time, it will stink, and it will also affect the smell of the milk powder, and finally lead to a short service life of the bottle. There are many chemical ingredients in ordinary detergents that have adverse effects on the baby, so it will be more beneficial for the baby to take a special cleaning agent. Not only can it effectively remove the milk fat, but it can also keep the bottle clean and will not affect the baby's health.

The wrong way to clean the bottle body There are also some parents who feel that washing the bottle is very troublesome, so only the bottle body of the bottle is cleaned during the cleaning process. In fact, this practice is also very wrong, because the baby will directly contact the bottle of the bottle when drinking. Then it is also very important to clean the bottle mouth, and the design of the neck is particularly fine, only use the water flow to rinse or rub it by hand, it is difficult to clean the bottle mouth, and it will also cause damage to the poor mouth.

Prepare a cleaning kit, so you can use a special cleaning kit during the cleaning process, disassemble the bottle, and clean all the corners of the bottle before use. So during the washing process, be sure to boil the bottle and then sterilize it. After cleaning, put the bottle in a clean and ventilated place, drain the water and save it for later use.

Then the bottle can be used after sterilization, and it will not breed bacteria and will not have any safety hazards.

Pay attention to the appropriate temperature, pay attention to cleaning, pay attention to the use of special brushes, pay attention to disinfection, and pay attention to drying.

The first is to use a brush to clean the corners, the second is to boil with boiling water, the third brush is also boiled, the fourth is to use a special pot to cook the bottle, and the fifth is to remove it immediately after cooking.

It should be noted that after scalding with boiling water and brushing with a bottle brush, the moisture in the bottle must be controlled. Before giving your child a bottle, make sure that the inside of the bottle is dry. Drying is the best "disinfectant".

It is best not to use too many chemical disinfectants. When the residual disinfectant enters the human body, it can adversely affect the child's intestines and the intestinal flora.

The feeding bottle is the baby's rice bowl and an important ingredient related to the baby's food safety. Regarding the sterilization of baby bottles, I will start with the conclusion:

1.Don't leave the milk for too long after drinking, and wash it in time.

2.If possible, it is best to steam sterilize.

3.Store dry upside down.

Why wash it in time

Infant milk powder is rich in many nutrients, so it is particularly susceptible to bacterial growth. Bacteria grow very quickly in nutritious places, humid places. Therefore, every time the baby drinks milk, there are generally times when there will be leftovers after drinking, we have to clean it up in time, and simply soak the bottle with water.

Why steam sterilization

Bacteria are a major contributor to food spoilage, bacteria are killed in high temperatures, but different bacteria take different times and temperatures.

The most cattle bacteria can be completely killed in about 1 3 minutes at 100 degrees, in this way, because of the altitude, the water we boil sometimes cannot reach 100 degrees, and steam sterilization is relatively reliable, because the temperature of the steam is generally a little higher than the boiling water.

Why dry storage

Keep it dry for storage, as bacteria are also easy to nourish in a humid environment, be sure to keep it after high temperature steam sterilization, then turn it upside down and dry it as soon as possible.

Bao Ma usually keeps things in mind

1. Clean it immediately after drinking every time, and don't leave it for too long without washing;

2. When cleaning, a bottle brush should be used to brush the inner and outer walls to avoid residues;

3. Don't let go of the details in the bottle, especially the position of the bottle mouth and rubber ring, as well as the nipple cap;

4. Use a low-concentration suitable cleaning agent to clean, pay attention to rinse completely;

5. After cleaning, it should not be dried with a rag, but should be dried naturally, or dried with a disinfection cabinet;

6. After each cleaning of the bottle, it is best to use the disinfection cabinet for disinfection, and the disinfection cabinet should choose a professional bottle disinfection cabinet. For example, Kangbao disinfection cabinets are more reputable brands.

mostAfter sometimes we don't ignore the contamination of the bottle itself, try to choose a reliable bottle, my point of view, glass bottles are the first recommendation, although they are easy to break

When washing the baby bottle, you can soak it in hot water for about half an hour, which can play a role in anti-inflammatory and sterilization, and when washing the baby bottle, you must wash all places, because the bottle is used by the baby every day, if it is not cleaned, it is very bad for the baby's body.

It should be noted that the bottle should be sterilized with hot water first, and it must be sterilized with 100 hot water, so as to ensure that the baby is very healthy and nutritious when drinking milk next time.

It is safer to pay attention to the use of high temperature disinfection and use hot water to clean the bottle.

What should I pay attention to when cleaning <> baby's bottle?

1.When washing the bottle, remove all parts of the bottle and wash them separately with a suitable cleaning tool. After washing, it is not necessary to disinfect it every time.

If necessary, it is recommended to use disinfection equipment. You can also put the bottle in boiling water and boil it for three minutes to sterilize it effectively. In addition, if there is a sterilization cupboard, you can also put the bottle in the sterilization cupboard to disinfect it once.

2.When cleaning the bottle, be sure to clean it with a bottle brush, and also use a special detergent for infants and young children to clean the bottle, so as to ensure that the child drinks milk powder healthily. In fact, many parents think that as long as the bottle is cleaned in time, the cup can be washed as usual.

However, the wrong way to clean the bottle can also cause bacteria to enter your child's body. Know that there will be milk in the bottle after use, and there will be a lot of lipids in the milk. If you only use water, it is difficult to remove the grease.

In particular, the grease on the plastic bottle will stink after a long time, and it will also affect the smell of the milk powder, which will eventually lead to a short service life of the bottle. There are many chemical ingredients in ordinary cleaners that have adverse effects on your baby, so it will be more beneficial to use a special cleaner for your baby. Not only can it effectively remove milk fat, but it also keeps the bottle clean without affecting your baby's health.

3.There are also some parents who think that washing the bottle is troublesome, so only the bottle body of the bottle is cleaned during the cleaning process. In fact, this practice is also very wrong, because the baby will directly touch the bottle when drinking.

Then the cleaning of the bottle finish is very important, and the design of the neck neck is particularly delicate. It is difficult to clean the mouth of the bottle by rinsing with water or scrubbing by hand, and it can cause damage to the bottle mouth. Moisture control:

After cleaning and disinfection, the bottles and nipples should be placed in a water-controlled place such as a shelf to control the moisture and avoid the growth of bacteria. Clean again before use: Many mothers think that the cleaned bottle can be used directly, but in fact, it is not, and it must be cleaned again before using it again.

That's all there is to it, I hope it helps.

The baby's bottle is very important, when cleaning the baby's bottle, it must be sterilized with high temperature, so as to kill the bacteria in the bottle, which is conducive to the baby's safety.

The baby's feeding bottle should be sterilized with hot water and can not be cleaned with the adults' tableware, which is easy to cause infection, and then the baby's feeding bottle is put into a special cleaning and disinfection box for disinfection to avoid secondary pollution.

Disassemble all parts of the bottle for cleaning, and boil in hot water for 3 to 2 minutes for effective sterilization.

Cleaning the bottle is required to use bottle cleaning agent, when feeding the baby milk powder, there are always residues on the bottle or pacifier, the traditional rinsing seems to be clean, but the milk powder contains oil is an established fact, in fact, if you do not use the cleaning agent to boil and disinfect, the oil is more difficult to remove, especially the plastic bottle, over time, the bottle will stink because of oil and gas, of course, this situation may be rare, but it also exists, and for the cleaning of the bottle, most parents just use the bottle brush and boiling water, brush can be. However, this kind of cleaning cannot remove a deeper level of milk scale, and in the long run, it is easy to breed bacteria.

Because you don't take care of your baby alone, you're afraid that everyone will be different, which will cause your baby to have diarrhea or gastrointestinal upset. Hanbao generally follows the following steps every time he drinks the milk and washes the bottle:

1.Wash with tap water first.

2.Wash with a special bottle cleaning solution and rinse well.

3.Blanch with boiling water for three minutes to sterilize and sterilize.

Hanbao's feeding bottle will be regularly sterilized with steam, because the baby's stomach is more sensitive, so the feeding bottle must be clean, hygienic and regularly sterilized.

If the bottle is cleaned immediately after each use and disinfected with hot water, the cleaning is already in place, and it is not recommended to use bottle cleaner. Bottle cleaners still have chemical ingredients and should be rinsed off with plenty of water after use. My baby has not used bottle cleaner since birth, in fact, excessive cleaning is not good for children, after all, we live in a bacterial environment, the air also has beneficial bacteria, excessive cleaning deliberately creates an excessively clean and sterile environment is actually not beneficial to the child's immune system.

Feeding bottles are a must-have for every baby. Whether it is a breastfed or formula-fed baby, everyone has a bottle in their hands, which is used to drink milk and water every day.

If the cleaning is not in place, the milk stains remain in the bottle, bacteria are grown, and the gastrointestinal function is still in the development stage of the baby, it is easy to have diarrhea, abdominal pain, acute gastroenteritis and other diseases.

Therefore, how to clean and disinfect the bottle has become the "top priority" in the daily parenting work of mothers. Some mothers think that rinsing with water and then disinfecting it is fine; Some mothers have prepared a lot of tools, such as bottle cleaners, bottle brushes, sterilizers, etc., and every time they clean the bottles, they must go through a whole set of processes to feel at ease.

Myth 1: After drinking and not cleaning and feeding in time, some mothers and fathers are busy burping the baby, put it aside and forget, or want to be lazy, just throw it aside, do not clean it in time, or even wait until the next time the baby is going to drink milk, then hurriedly rinse it, which is not good.

Do: Clean it in time and don't leave it for too long.

As soon as the baby finishes drinking, it is best to clean the bottle immediately, if the milk is not finished, the remaining milk should also be poured in time to clean the bottle.

Myth 2: Wash the bottle with only clean water.

Mom and Dad feel that milk is not a dirty thing, just rinse it simply, and they are also worried that it will not be cleaned with detergent and there will be residue.

However, milk contains a large amount of lipids, if you only use water, it is more difficult to remove the oil, especially the plastic bottle, after the oil is attached for a long time, the bottle is easy to sour and smelly, which will not only breed bacteria, but also affect the service life of the bottle.

Do: Use a milk brush with an appropriate amount of detergent.

The misunderstanding of washing the bottle is to wash the bottle with water, only pay attention to the bottle body when cleaning the bottle, only sterilize the bottle after use, and clean the bottle Seven steps: 1Pour out the remaining milk 2

Disassemble all the bottles3Rinse with water or soak for a while4Drop in an appropriate amount of bottle cleaner 5

Brush the inside of the bottle with a bottle brush6Brush the bottle thread 7Remove the nipple and nipple holder and wash them separately

Rinse with clean water 2-3 times and disinfect.