What should I do if it s always wet in the bathroom?

Make a small space for the shower, don't have standing water, etc. and take steps to remove stagnant water. It's not just the bathroom, the walls, floors, doors, windows of the house are wet everywhere, but that's okay. If the tide is high.

Now, every other day there will be good weather. It's a sign, but it's still annoying. It's not that easy to solve.

Let me give you a suggestion. If there is fog in the morning, close the doors and windows and wait until the fog clears before opening all doors and windows to facilitate ventilation. The reason is that there is water in the cushions!

The crux of the problem may be water accumulation in the cushions.

The traditional waterproofing process in the bathroom is to level the floor and apply a waterproofing layer, followed by a layer of soft cement mortar with a thickness of 2-3 cm.

as a cushion. Then lay the floor tiles.

When water is used in the bathroom, the water passes through the tiles and floor drains.

The gap between it and the sewer pipe leaks into the cement mortar cushion and continues to accumulate. Because there is a waterproof layer under the floor tiles, the water in the bedding cannot be removed, resulting in long-term decay and odors, and the bathroom is always damp. It is important to note that the waterproofing material should be applied all the way to the inside of the sewer.

When installing the floor drain, it should be closely connected with the sewer and there should be no gaps. The area of the bathtub is prone to stinky and damp. Many friends use many methods to relieve the smell and moisture in the bathroom.

And hope to solve these two problems, and then easily remove odors and moisture from the bathroom with two dishes. If the toilet is always full of bad smells and damp problems, there will be a lot of bacteria, which will affect our use of the toilet and our health. The deodorizing drain in the bathroom is the biggest smell**.

The sewer of the handle will definitely make a U-shaped tube, forming a water seal.

Prevents odors from backing up from the sewer. Never go directly into the water pipes, the smell will enter the home directly.

Floor drains will accumulate and the drains will be unbalanced, which will also cause odors in the space, so they are often dredged. The local moisture dehumidification on the south side of the bathroom is heavy. A damp space is not only good for bacteria to multiply, but it also creates a bathroom odor.

It is advisable to keep the bathroom dry, or install a bathtub that can be heard in winter and keep the interior dry. How to understand the bathroom? The ground is level, determine the height First, find the ground, clarify the vertical height, and then in the stability layer, find a certain amount of water and the surrounding cement cementitious material. Seal.

You can spread an absorbent blanket in the bathroom, so that your bare feet are not easy to slip when you go to the bathroom. It won't get wet anymore.

You can open the door of the bathroom more to ventilate, and you can put some dehumidifying things in the bathroom, which can make the bathroom drier.

It is possible to install an exhaust fan in the toilet as the exhaust fan can exhaust moisture.

The bathroom should be cleaned and wiped clean with a rag, and it should be ventilated, and some plants should be potted and potted should be placed, and moisture should be removed frequently, and an air purifier can be used, etc., so that the dampness can be changed.

Try it should not be sprinkled, and it should be wiped clean with a cloth, and it should also be dried with an electric fan, and it should be kept dry, and it should be kept ventilated, and so on, and that's it.

At this time, you can open the window or door of the bathroom to ventilate it, and then you can also put some moisture-proof items in the bathroom, or you can put an exhaust fan, so that it can be kept dry.

Usually use a cloth to wipe the water in the bathroom, and you need to clean it once every two days so that it will not get wet.

At this time, you should turn on the exhaust system of the bathroom to let the moisture out of the bathroom as soon as possible, and then open the door of the bathroom to ventilate.

You can lay a carpet in the bathroom, the carpet is also more absorbent, and you won't slip on it if you walk barefoot.

1. Exhaust fan. The exhaust fan is the basic equipment of the bathroom, and the exhaust fan can be turned on frequently, in addition to discharging the moisture in time, it can also discharge the filth of the bathroom, which is conducive to physical health. If you do not have an exhaust fan, you should close the door when you leave the bathroom after taking a shower and allow the moisture to condense before entering to dry or blow dry with an electric fan.

There is an integral shower room, so be sure to close the door when showering.

2. Install a shower curtain. If the bathroom is not divided into dry and wet areas, then please try to install a shower curtain to prevent the bath water from splashing (special attention must be paid to the moisture-proof and dehumidification of the bathroom socket, once the power supply leaks due to moisture, the consequences are unimaginable).

3. Deal with it in time after bathing. The walls of the bathroom look dry, but in fact they hide invisible moisture. Therefore, toilets should not be built under stairs, and plastic wall materials should be used for unpopular shooting; The tile joints that are attached to the wall and the ground should be coated with white cement, if the brick joints produce black spots, it means that the moisture is too heavy and moldy.

Disinfect the walls with disinfectant water in time, and use a hair dryer to dry the walls, and open the door more often at home to ensure ventilation so that the water can fully evaporate. Also, try to dry the walls and floors as much as possible after bathing.

In fact, to avoid dampness in the bathroom, the best thing is to keep the ventilation of the bathroom, many houses have no windows, it is best to follow the exhaust fan or the special empty chain instructions, try to let the water seal of the bathroom evaporate, and after taking a bath, dry the floor in time.

1. The waterproofing of the wall of the bathroom is not done well, and when the moisture or water vapor in the bathroom cannot be discharged in time, it will enter the wall. In this case, the only way to do this is to re-lease and sell a new waterproof, otherwise, the entire wall will be affected. 2. The water pipe of the bathroom is broken, resulting in the dampness of the wall caused by the water infiltrating into the wall.

In this case, the water pressure test should be carried out on the water pipe, if there is a problem with the water pressure, then it is a problem with the water pipe, and it is necessary to overhaul to solve the problem.

To say that the most humid place in the house is the bathroom, the bathroom is the most humid place in the family space, because of the frequent use of water, coupled with the rain environment is humid, it is easy to breed bacteria, leakage affects the life and health of my return to the block. Toilets should be maintained frequently to prevent them from being damaged by moisture. The following home improvement network will show you how to deal with the dampness in the bathroom.

1. Common causes of dampness in the bathroom

1. Bathroom water pipe: Now the general water pipe is a dark pipe, if the water pipe is broken, it can not be found in time, the water will slowly enter the wall, so that the entire wall will be soaked, affecting the entire bathroom, the problem of dampness is the most difficult to deal with, so pay more attention.

2. Bathroom waterproofing: If the bathroom waterproofing is not done well, it will lead to a large amount of water vapor in the air infiltrating into the wall, which will affect the wall, and the whole space will be extraordinarily humid.

3. Bathroom ventilation: There is a lot of water vapor in the bathroom, but if the ventilation conditions are not very good, then the entire water vapor can not be discharged, and then it will condense into water droplets, which is also the culprit that causes the bathroom to be damp, so the ventilation conditions must be guaranteed, otherwise it will have a great impact on future life.

Second, the bathroom dampness solution

1. Water pipe repair: If there is no problem after the inspection, then it is necessary to detect whether there is a leakage in the hidden pipe and water pipe, turn off all the faucets at home to see if the water meter is rotating, and if there is a proof that the water pipe is broken and needs to be repaired in time.

2. Waterproof construction: If there is a problem with the waterproofing of the bathroom, then the choice of materials must be done in the selection of materials, first of all, it must be redone waterproof, and then the materials selected in the bathroom furniture must also have waterproof performance, so as to fully cope with the problem of moisture.

3. Install an exhaust fan: If there is no exhaust fan installed in the bathroom, then you can choose an exhaust fan or a special air conditioner, which can speed up the dissipation of moisture in the air in the bathroom and solve a large amount of water vapor in the air.

The solution to the dampness of the bathroom is as follows:

1. The following measures can be taken to restore moisture in the bathroom: add a waterproof layer on the surface of the tile, block the gap where the water on the surface layer of the tile penetrates into the base layer, and gradually evaporate and dry the original water in the base layer through the wall to solve the problem of wall permeability.

2. Specific construction method: clean the bathroom floor, remove the dust on the tile surface with a brush, and make the tile surface layer free of open water. Use multi-functional bio-waterproof adhesive and cement according to 1:

The ratio of 3 is adjusted into cement slurry full hook tile brick joints, after the local water is absorbed, filled with waterproof cement slurry, and the ground and wall can be used for 36 hours dry. Remove the damp parts of the wall and see the base layer of the wall to speed up the evaporation of water. Re-waterproof the floor and wall of the bathroom.

The rest

A way to solve the dampness of the bathroom, first of all, we need to put the waterproof in place, first of all, it is recommended that when decorating, the waterproof height of the bathroom must be a position of meter high. In this way, we can ensure that when we use water in the future, we can prevent the water tomb from soaking the wall, which will eventually cause the problem of mold on the wall.

When we choose a tile drain, we must choose a good floor drain, a good drain has fast drainage, anti-odor, anti-clogging and easy to clean, and the installation should also pay special attention. It must be the lowest point of the slope of the bathroom, so that the drainage is faster and smoother.