The bathroom is the wettest place, so what is the best way to get wet?

Lime moisture absorption faces the problem of "how can the bathroom of a family house be quickly dehumidified", and finally lime can be used to absorb moisture. If the ventilation and exhaust effect is not good、Dehumidifier。

If it's a bit expensive, try using lime to help dehumidify. The lime can be wrapped in a towel, and the appliance is moisture-proof. You may wish to use a dehumidifier.

Air conditioner or heater. The dehumidification products on the market now mainly include dehumidifiers, air conditioners, and heaters.

Some moisture-proof objects can be used to prevent moisture. For example, moisture absorbers, which are more common moisture absorbers on the market, are generally made of calcium chloride.

As the main content, most of the granules are also added with flavor ingredients, which can integrate the functions of dehumidification, aromatic, anti-mildew, deodorization, etc., and are mostly used in wardrobes and shoe cabinets; Some homes have been renovated with exhaust fans.

The windows were sealed, and it turned out to be very inconvenient to use. Because the exhaust fan can only be used for a while, it is naturally no problem to eliminate odors, but it cannot guarantee that the air in the bathroom is fresh and dry. There are many benefits to opening a window, such as:

Ventilation is not limited by time, because the bathroom is often not ventilated, and the bathroom should be disinfected regularly, and some vinegar can be sprayed.

solution, you can also spray an appropriate amount of 84 disinfectant.

Carry out disinfection. <>

by using desiccant.

Many food or clothing products will have a desiccant specially used for moisture-proof and dehumidification in the packaging, which can be collected on weekdays and placed in the bathroom to receive moisture-proof effects. Air conditioning has the ability of refrigeration and heating, and now the progress of technology air conditioning has also developed an air conditioner suitable for the bathroom through improvement, to solve the impact of moisture in the bathroom on the life of electrical equipment, and to solve the problem of moisture in the bathroom, which can be handled by the special air conditioning of the bathroom.

For the current bath bomb, it is not only the heating function, but also the functional needs of the bathroom, and the dehumidification function has been realized for the current bath bomb.

You can usually ventilate more, and if you can not wash clothes in the bathroom, try not to wash clothes in the bathroom, and mop it as soon as possible if there is water on the ground.

Except when I go to the toilet, the door is left open, and residents with windows in the toilet should always open the windows for frequent ventilation, and my bathroom has no windows, so I will choose to leave the door open often.

To dehumidify the bathroom, you can turn on the dehumidifier or heater, or you can wrap the lime in a towel and put it in the corner to absorb moisture. Household air conditioners can have the function of dehumidification, which can have the effect of dehumidification.

If there is no window in the bathroom, you need to install a ventilation fan, and to ensure the normal use of the water, let the water go down in time, and do not pile up things on the ground at the end.

Generally, today's toilets have dry and wet separation, and the most effective dehumidification method is nothing more than exhaust. Also keep it ventilated. There is a natural wind, and if there is a wind, it will not be wet.

Wipe the floor or basin dry after each use of the basin or bath, which is very effective in removing moisture.

Open the windows. Opening windows allows for ventilation and allows the bathroom to dry out.

Usually use a dry mop to mop the floor clean, and it is best to buy a dryer so that the bathroom will not get wet.

Introduction: The bathroom is damp, and everyone must find a way to improve the damp situation. You can install an exhaust fan in the bathroom, and you should choose the right power according to the size of the bathroom.

You can also put a pot of green plants in the bathroom, which can also reduce the smell of the bathroom.

The dampness in the home is really a very uncomfortable situation, every time I go to the bathroom and find that it is wet, the water feels uncomfortable, I want to remember that the bathroom is too wet, we must learn to ventilate it, the installation of the exhaust fan can effectively alleviate the dampness of the bathroom, of course, we also try to drag him after using the bathroom, which can help our bathroom to be in a dry state, but also to avoid slipping, We have been living in such an environment, immunity will decline, and the body will get sick, so we must drag it a little more, open the window for ventilation, and install an exhaust fan if it doesn't work, which can effectively alleviate the dampness of the bathroom.

And you can also hang a dehumidification bag in the bathroom, which can also reduce moisture, and you can also put a pot of green plants, which can effectively alleviate the damp odor in the bathroom. When installing the bathroom or decorating the bathroom, we try to separate the dry and wet, we must do it, for those bathrooms without windows, it is important to smell the dry and wet, otherwise the whole bathroom will be particularly wet and uncomfortable. No matter when you finish using the bathroom, you must learn to clean and rinse first, take it off again after rinsing, and then put some other sachets after taking it off, of course, you must also remember that the sachet should be replaced in time, and you can also put some interesting things in it, the floor drain in the bathroom must pay special attention to the falling hair or other sanitary sundries, which may flow down the water to the floor drain, so you must dredge it often to prevent blockage, and you must wipe it clean after finishing.

Also often open the bathroom window for ventilation, you can install some ventilation systems in the bathroom, you can also put some mothballs in the bathroom, you can also open the ventilation system of the bathroom, and you can often open the door of the bathroom for ventilation.

Do a good job of drainage facilities, install a fresh air system in the bathroom, quickly absorb all the water vapor, and then dry, put a dehumidification bag, and use desiccant, these methods can solve this situation.

You can open the window of the bathroom, you can turn on the fan of the bathroom at ordinary times, and you must ventilate it in time after taking a shower, so that you can change the situation.

You can put some sanitary balls, you can also spray some air fresheners, usually ventilate in time, and use some activated carbon. A ventilation fan can be installed.

Here are some tips for protecting the bathroom from moisture:

1. Waterproof treatment.

When the bathroom wall and floor tiles and stone are laid, the waterproof layer should be made under the surface layer, the ground should be leveled with cement mortar, coated with waterproof coating, and then a layer of 1:2 cement mortar should be laid as a binding layer, and the floor tiles and other decorative materials should be paved up, and the wooden board should be patted solid after watering to achieve smooth and firm joints and tight joints. Before the stone is paved, the back coating should be done to reduce the occurrence of "water stains".

The contact between the waterproof layer and the wall should be turned upwards to about 25 to 30 cm above the ground, the washbasin should be more than one meter above the ground, and the shower room should be more than one meter above the ground. If you do paint decoration, you should first brush waterproof putty and choose waterproof paint. To deal with the surface of the ground layer of the water to slope to the floor drain, no flooding, no water accumulation, after 24 hours of water storage test no leakage.

2. Ceiling material.

It is recommended to use microporous aluminum gussets for bathroom ceilings to enhance ventilation and prevent condensation. If you make a gypsum board ceiling, you should first brush waterproof putty, and then brush waterproof coating; PVC ceilings are prone to condensation and dripping, so they should be used with caution.

3. Pipeline installation.

The installation of bathroom pipes should avoid changing the original upper and lower open pipes as much as possible, and the decoration should be done horizontally and vertically, laid firmly, and the slope should meet the requirements. The valve and faucet are installed flat, flexible and convenient to use, and the open pipe is brushed with anti-rust paint, and the hidden pipe is brushed with anti-corrosion paint. The water supply pipeline is tightly connected with accessories and appliances, and there is no leakage after the water test.

The floor drain design should still be based on the water supply and water pipes, and the surface should be slightly lower than the ground.

4. Appliance selection.

The bathroom appliances are installed in the correct position, and the upper edge of the appliances should be horizontal. Bathroom appliances should choose branded and waterproof products, such as bath lamps used in a humid environment, the shell should be made of stainless steel, with good anti-corrosion performance, and with waterproof power switches, cables and plugs, not afraid of water showers when powered on or powered off, and will not cause leakage or damage. It also needs to be equipped with waterproof lampshades, waterproof sockets, etc.

5. Avoid wooden materials.

The bathroom should avoid the use of wooden materials, and when it is really necessary to use, it should be decorated with fireproof board or mixed oil, which can be waterproof. When doing ceiling or other package decoration, the hidden wooden keel needs to be brushed with waterproof paint or preservative.

6. Keep ventilation.

It is very important to maintain a well-ventilated environment in the bathroom. Choosing better quality ventilation equipment can help moisture and vapor volatilize quickly and keep the room fresh and clean.

There are two main solutions to the dampness of the bathroom, one is to open the window for ventilation, and it is best to open the door as well, so as to form a ventilation through the hall and ensure the dryness of the bathroom. Of course, the premise is that the bathroom is deodorized, otherwise there may be more strange smells in the house; The second is to adopt the design of dry and wet separation, separating the rain, the washbasin and the toilet. The main thing is the shower area, and you can get a separate space.

Although it sounds simple, both methods have certain limitations, such as opening windows for ventilation, provided there are windows or where they are opened. The same is true for dry and wet separation, which is mainly suitable for some situations where the toilet area is moderate or large. If the area is too small, the rain, toilets, and sinks are all crowded together, and there is no way to do it.

When possible, the best way to stay dry is to ventilate. If the toilet itself has a window, open it yourself at home. If there is no window, a separate window can be opened if there is a window opening position.

It is recommended to make a sliding window left and right or up and down, which can avoid accidents when the wind is strong, and a layer of glass and a layer of screen window can also prevent dust.

The most convenient and fast is the wind through the hall, and the wind speed is very high when the door is opened inside and out. However, this requires us to treat the toilet and ensure that it is dry and hygienic before the toilet door can be opened. If you can't do that, you usually open the screen window for ventilation.

The so-called dry and wet separation is to separate the shower area from other things. A large part of the cause of dampness in the bathroom comes from the shower, where multiple areas are mixed together, and when you take a shower, the whole space is filled with water. If we can plan separately, we can reduce this situation.

The most common way to do this is to put the sink and toilet together, and then plan a separate glass hut with a shower and toiletries. If you have a large bathroom, you can also consider a bidet or bathtub. The disadvantage is that it must have a large area, and a small area cannot be separated from dry and wet at all.

If you can't solve the problem of dampness, you can only leave the door open to keep the air circulating. Or put the toiletries in it somewhere else and take them back in when you're ready. Especially towels, after use, must be taken to a ventilated place to dry, otherwise it is likely to "moldy".

It is difficult to wash off the mold spots on the towel, so you must soak it in hot water and scrub it vigorously. If you can't wash it off, you can only replace it, otherwise it will be very resistant when you use it. I once had a few towels that I forgot to take out on a business trip, and I couldn't use them anymore when I came back.

In fact, the problem of the bathroom should be considered as early as when decorating, and the dampness will definitely have an impact on the future life.

You can choose some dry waterproof materials in the process of decoration, the floor drain should also choose a better quality, and the bathroom window should also choose a better quality, so as to maintain good ventilation. You can put some desiccant in the bathroom. Achieve the effect of moisture-proof and moisture-absorption.

A ventilation device should be installed, and a bath bomb should be designed to avoid dampness, and it can also make the bathroom more ventilated, so that the corresponding problems can be solved, and at the same time, it is more convenient.

You can install an exhaust fan in the bathroom to drain the moisture in the bathroom, and you can install a shower curtain to avoid water splashing when taking a bath.

You can turn on and off the ventilation, you can use the glass partition, you can turn on the ventilation function of the bath bomb, you can buy a dehumidifier, you can buy a desiccant.

You can install a ventilation fan in the bathroom, you can install a small heater in the bathroom, clean the bathroom frequently, and don't hang wet clothes in the bathroom.

You can open a window in the bathroom to refract sunlight through the window, or paint the walls white. Put mothballs, dust collectors, install exhaust fans.

First, the choice of substrate.

The area of the bathroom is usually not large, and it is really difficult to separate the dry and wet in an area of a few square meters, so we have to hope for the basic materials with moisture-proof engineering. Therefore, it is recommended that the bathroom cabinet selected should have better moisture-proof performance in terms of material and technology. If the product is fully ventilated, there is no problem if the humidity reaches 95% in a short period of time, because it will dry out in a short time.

Second, panel selection.

The first barrier between bathroom furniture and the humid air in the room is the furniture panel, so the advantages and disadvantages of the panel are also a problem that we need to consider. In the face of a dazzling array of panels on the market, owners must not have any choice when purchasing, and they must choose the panel that suits them. High-quality solid wood veneer and wood grain with plastic resin protection are easier to maintain and have a classic aesthetic in terms of decorative effect.

3. Internal moisture-proof.

A common phenomenon in the bathroom is that the low floor of the sink cabinet will be deformed after the bathroom furniture has been used for a period of time, because the water pipes hidden in the cabinet are not taken seriously. Because the pipe was relatively hidden, it was installed without consideration for stability, so the low waterside of the cabinet remained and soaked the furniture, creating an irretrievable situation over time. Therefore, it is necessary to use a waterproof aluminum bottom plate with a waterproof bumper strip, and this will not be the case.

Fourth, pay attention to the installation process.

Be sure to pay attention to the sanitary ware in the bathroom. While choosing bathroom furniture is important, it is only the first step, and the installation process is equally important, and if you don't do it well, it will be useless. You must know that water droplets and water vapor are pervasive, and it is best to do a good job of waterproof and moisture-proof, and you must do a good job in the installation of bathroom furniture.