The computer will automatically shut down after overclocking, and how to turn off the CPU when it is

Optimization Master or z**.

Measure the temperature first, when measuring the temperature, you need to open the game or the program you usually run to measure the actual temperature and see if the temperature has soared.

It should be a bad heat dissipation, open the case, clean up the CPU inside, the dust on the graphics card fan and the power supply, if it doesn't work, you have to replace the CPU fan with a little more power, there are a lot of problems recently, all of them were used in the past, the fan power is small, and cheap accessories are used for heat dissipation, in addition to the current online games, the computer has been running for a long time, useless system garbage, more dust, running large online games, etc., the CPU occupies a lot, and it can't be quickly dissipated, Cause the CPU temperature to be too high, causing the computer to shut down protectively!

The possible scenarios are as follows, which are gradually ruled out below:

1.Borrow a more powerful power supply and try again.

2.Try a different graphics card.

Take a look at the ultra-low point.

4.The memory is also replaced, maybe you loosen the capacitor when you clean it.

It is caused by excessive overclocking, you can reduce the overclocking amplitude appropriately.

Overclocking of a computer is to increase the working frequency of hardware such as CPU, graphics card, and memory through the overclocking method of the computer operator, so that they can work stably at a frequency higher than their rated rate, so as to improve the working speed of the computer.

The English name for overclocking is "over."

"clock" is a technical means to obtain performance beyond the rated frequency by adjusting the hardware settings to increase the main frequency of the chip.

Not every computer can overclock you. The main thing is temperature. The CPU will automatically shut down when the temperature detection is high.

As soon as the reference frequency of the computer's memory is overclocked, the computer will automatically shut down and reboot black, because the computer motherboard does not support memory overclocking, and the automatic protection will be started before restarting the computer.

Steps to set up CPU overclocking in iOS:

1. Press the "DEL" button to enter the BIOS settings menu on the boot screen.

2. Please select Manual.

3. CPU frequency multiplier, choose according to your needs.

4. This is Intel's REMAX technology, when the CPU frequency is too high, you can choose to turn it off.

5. Set the external frequency of the CPU as needed.

6. Please lock the PCIe bus frequency to 100, and the current motherboard will automatically lock to 100.

7. The memory ratio setting (also known as the memory crossover setting) determines the memory operation frequency, and before overclocking the CPU, the lowest frequency is selected to ensure the stability of the memory and memory controller.

8. The QPI frequency (the frequency selected in the case of overfrequency) is very helpful for stability.

9. You can enter the memory timing adjustment page to adjust the memory order, and when the CPU is overclocked, it will be used gradually to ensure stability.

10. The next IMC voltage is related to the external stability of the CPU core, which also determines the stability of the entire CPU, for the same reason, Auto is used when the CPU is overclocked.

11. Memory voltage setting, select Automatic.

12. From here, you can enter the CPU advanced options function settings.

13. CPU advanced function setting, overclocking is to ensure energy-saving shutdown, select the core frequency from the BIOS to shut down and CPU overclocking.

If your computer gets stuck during overclocking, it is not recommended to force a shutdown directly. This can cause some problems with your computer, such as data loss, file corruption, etc. It is recommended that you follow these steps:

Press and hold the power button on the computer for about 5 seconds until the computer shuts down automatically.

After waiting for about 10 seconds, press the power button of the computer again to turn it on.

When the computer restarts, you can go to the BIOS settings and restore the overclocking parameters to the default values to avoid the problem of unstable overclocking.

Before reclocking, it's a good idea to check your computer's hardware specifications and performance to see if your computer is suitable for overclocking, and what adjustments and settings you need to make.

It is important to note that overclocking may be a certain risk and burden on your computer. If you're new to overclocking or you're not sure how to do it, don't give it a try. Consider consulting professional technical support or seeking help from the relevant community.

Although there may be a kind of problem with the source of the source of the direct shutdown, but in addition to shutting down, there is no other way to talk about the state of the stuck, and the sudden power outage when the card is scattered is actually worse, so it is determined that it is a crash rather than a slow response to what program is running, then shut down and then solve it.

Hardware configuration: If the computer hardware configuration is high, it will consume more resources when running large programs or games, which will cause the temperature to rise, so you need to control the computer boot time in a short time to avoid the computer overheating. 2.

Heat dissipation: If the heat dissipation effect of the computer is good, the boot time of the computer can be appropriately extended. 3.

Usage scenario: If you need to run programs on the computer for a long time or perform time-consuming operations such as ** and file conversion, you can appropriately extend the boot time of the computer. In general, if the overclocked computer does not need to run large programs or games for a long time, and the heat dissipation effect is good, it is generally recommended to control the boot time to about 6-8 hours per day.

At the same time, you also need to pay attention to keeping the computer clean, good heat dissipation, regular maintenance, etc. <>

Whether an overclocked computer needs to be turned on for a long time can be considered according to the following imitation factors:1Hardware configuration:

If the computer has a high hardware configuration, it will consume more resources when running large programs or games, which will cause the temperature to rise, so it is necessary to control the computer boot time to a short time to avoid the computer overheating. 2.Heat dissipation effect:

If the computer has a good heat dissipation effect, you can appropriately extend the boot time of the computer. 3.Usage Scenarios:

If you need to run programs on the computer for a long time or carry out time-consuming rental operations such as ** and file conversion, you can appropriately extend the computer boot time. In general, if the overclocked computer does not need to run large programs or games for a long time, and the heat dissipation effect is good, it is generally recommended to control the boot time to 6-8 hours per day. At the same time, you also need to pay attention to keeping the computer clean, good heat dissipation, regular maintenance, etc.

Here are the related extensions, I hope you find it helpful! ~<

The boot time also depends on the specific situation, here are some suggestions:1Daily use:

If it is used lightly for daily office work or surfing the Internet, it is recommended to use it for no more than 4-6 hours each time, and then turn off or sleep. 2.Long time use:

If you need to use your computer for a long time, you can consider changing the computer settings to a state of rest and sleep to make full use of the computer's resources and avoid frequent power on/off. 3.Cleaning and Maintenance:

After using the computer for a period of time, it is recommended to clean and maintain the computer, which can help the computer maintain good heat dissipation, thereby extending the life of the computer. In general, it is recommended to arrange the boot time of the computer according to your specific situation, and pay attention to keeping the computer clean and regular maintenance, which can effectively extend the life of the computer and avoid failure and damage. <>