The laptop won t turn on! I want to reinstall the system myself! What to do?

Tell you a way to check whether there is a problem with the hard disk and memory,**A win pe system,Do it in the U disk,It is a reason to use the U disk to do the system,Start the boot with the U disk,That is, start the win pe system,If the win pe system starts successfully,It means that there is no problem with the memory module,Open my computer after starting,If you can see the hard disk letter and can open,It means that the hard disk is no problem,Then you can do the system。

It can be installed on a USB flash drive or CD-ROM.

Summary. First, make sure that the laptop's power cord is properly connected to ensure that the power supply is working properly. 1.

Press the power button and select the BIOS settings. In the BIOS settings page, select "Startup Items", set the boot items to USB flash drive boot, save and exit the BIOS settings. 2.

Insert the USB flash drive of the installation system, press the power button, and start reinstalling the system. When installing the system, follow the prompts to complete the system installation. 3.

Once the installation is complete, re-enter the BIOS settings, set the boot items to hard disk boot, save and exit the BIOS settings. 4.After the installation is complete, restart the laptop to complete the system reinstallation.

How to reinstall the system if the laptop can't enter the system, high score!!

First, make sure that the laptop's power cord is properly connected to ensure that the power supply is working properly. 1.Press the power button and select the BIOS settings.

In the BIOS settings page, select "Startup Items", set the boot items to USB flash drive boot, save and exit the BIOS settings. 2.Insert the USB flash drive of the installation system and press the power button to start reinstalling the system.

When installing the system, follow the prompts to complete the installation of the limb system. 3.Once the installation is complete, re-enter the BIOS settings, set the boot items to hard disk boot, save and exit the BIOS settings.

4.After the installation is complete, restart the notebook to complete the system reassembly and holding.

1.To put it simply, formatting is to divide a blank disk into small areas and number them for the computer to store and read the data. Without this work, the computer would not know where to write or where to read.

The hard disk must be partitioned before it can be used, and after the disk is partitioned, the next step is to format the hard disk, and the hard disk must be formatted before it can be used.

Formatting is the creation of tracks and sectors in the disk, and after the tracks and sectors are established, the computer can use the disk to store data.

Take a look at the ** above, I hope it helps you.

I can't turn it on. Some gods can also install the system from a USB flash drive. Sure enough, the great god. Let's start the boot problem first.

If you have an optical drive, you can reinstall it with a disc, and if you don't have it, you can use a USB flash drive.

It is recommended to go to a nearby computer store for repair, or find a technician to repair it.

Go to the computer store, 30 bucks.

Install it with a USB flash drive boot disk,** A cabbage software on the Internet,Use cabbage to format the USB disk into a boot disk,Load a win7 system on the Internet,Then copy the system slag file to the USB flash drive,Restart the computer,Press F2 to enter,BIOS set boot,Adjust the drive letter of the USB flash drive to the first,Press F10Save to exit the reboot,Enter Windows