What kind of chip is ASEMI GBU608 made of?

He Shouqi's commentary (collection of Beijing Library).

The chip size is 100mil, the output is stable, the parameter consistency is high, and the rectifier bridge GBU1006 can operate efficiently for a long time. The current advanced equipment such as Jianding and Guankui is used to detect 18 electrical parameters at the same time. Laser marking, environmentally friendly and pollution-free, clear printing.

Rectifier flat bridge GBU1006

Electrical parameter 600V

GBU1006: Box 5K.

Box material: imported kraft paper.

Pressure-resistant, wear-resistant, impact-resistant, strong Packing: 500pcs Box outer box: environmental protection slip square box size:

Normal is 88mil, there are requirements for quality, it is recommended that you use the original factory, such as YJ, HY, ASEMI semiconductor, PEC and other well-known brands.

CMOS chips.

Chinese name: complementary metal oxide semiconductor Chip type: Immediate memory (the kind that will lose data when power is off) Capacity:

128 256 bytes Description: It is a low-power memory, which is mainly used to store the setting information in the BIOS and the system time and date. It should be distinguished from BIOS chips.

Early CMOS chips were a single chip, the MC146818A (DIP package), with a total of 64 bytes of system information. Microcomputers after 386 generally integrate the MC146818A chip into other IC chips (such as 82C206, PQFP package), and after 586, the motherboard integrates CMOS with the system real-time clock and backup battery into a chip called DALLDA DS1287. With the development of microcomputers and the increase of configurable parameters, CMOS ROMs generally have a capacity of 128 bytes and to 256 bytes.

In order to maintain compatibility, each BIOS vendor will set the first 64 bytes of CMOS ROM content in their BIOS BIOS to be consistent with the CMOS ROM format of MC146818A, and add their own special settings to the extended part, so the BIOS chips of different manufacturers are generally not interchangeable, even if they are interchangeable, the CMOS information must be reset after exchange to ensure the normal operation of the system. If the data in the CMOS is corrupted, the computer will not work normally, in order to ensure that the CMOS data is not damaged, the motherboard manufacturers have set up a switch jumper on the motherboard, which is generally turned off by default When the CMOS data is updated, it can be set to be overridden. In order to prevent the computer from losing CMOS and system clock information, there is a battery near the CMOS chip to continuously power him. Check out the follow-up questions.

Since CMOS and BIOS are closely related to computer system settings, there is a saying about CMOS settings and BIOS settings. For this reason, beginners often confuse the two. CMOS is a special RAM chip on the motherboard of a computer, which is the place where the system parameters are stored, and the system setup program in the BIOS is the means to complete the parameter settings.

Therefore, it is accurate to say that the CMOS parameters are set through the BIOS setup program. The CMOS settings and BIOS settings that we usually talk about are simplified, which has caused confusion between the two concepts to a certain extent. In fact, the BIOS program is stored in an EEPROM flash chip on the motherboard, and the CMOS memory is used to store the data to be saved after the BIOS is set, including some system hardware configurations and user settings for certain parameters, such as the system password of the traditional BIOS and the device boot sequence.

Before I met you, I really didn't realize that I had the problem of judging people by their appearance.

The standard parameter is 6A1000VThat's right, look at the 88mil used in the introduction of the chip, according to this specification, the current should be able to reach 7 amps, I hope it will help you.

That's right, there is an introduction on their official website, the 88mil chip is larger than the market, and the current of this specification chip can reach 6A

Wave chip, it seems that some people also call it Boton chip, Asemi Semiconductor, they call this chip called Wave Chip, anyway, I only know the glass passivation process of GPP.

Asemi semiconductors do not have chips haha, just kidding, they use Taiwan crest chips, the name of Taiwan crest chips GPP has meaning: glassivation passivation parts, Chinese meaning is interpreted as a general term for glass passivation devices.

Asemi semiconductor rectifier bridge is made of Taiwan wave GPP chips, and the difference and advantage between the glass passivation process and the traditional protective adhesive process lies in its stable performance and high temperature resistance. The glass passivation process of the crest chip itself has less leakage than the traditional process, and the quality is more guaranteed.