To install the whole wardrobe, what decoration processes of the whole wardrobe should be mastered?

First of all, you need to determine the position, then you need to determine the front treatment, you also need to pay attention to the front grinding, but also to pay attention to the installation of the wardrobe plate, and then pay attention to the partition of the wardrobe.

First of all, it is necessary to measure the size, then customize, install, and determine the specific space arrangement inside, so that it can be better used.

1. The overall wardrobe is a large piece of furniture, and its placement is directly related to the overall space layout of the bedroom.

2. Based on the principle of consistency and mutual correspondence between the overall style of the bedroom and the main theme tone, it is necessary to choose the cabinet color of the overall wardrobe, the style of the wardrobe sliding door, the color of the door panel and the floor, bed frame, bedspread (single), curtains, etc. to be selected in advance.

3. To design a reasonable place to place the overall wardrobe, we should also take into account the reasonable wiring of electricity and network (some need to design TV racks in the wardrobe), the location of the switch socket, the hanging position of the air conditioner, and the size of the passage in the bedroom.

4. The structure of the bedroom determines the width and size of the overall wardrobe and the design of the internal space structure of the cabinet to a considerable extent.

What are the steps to install a wardrobe?

1. Check whether the tools are complete.

First of all, before the installer goes out, he should check whether the hardware tools he carries are complete, which is an important step for the smooth installation of the wardrobe, after all, it will be a waste of time if you forget to bring the tools during the installation process.

2. Clean up the installation position.

Before installation, let the customer determine the installation location of the wardrobe and clean the installation location of the wardrobe in advance.

3. Whether the wardrobe parts are complete.

Before installation, we disassemble the panels of the wardrobe, and then place them in accordance with the installation order and position, check whether the parts are complete, and the same is true for the finished wardrobe of the installed stove. If the spare parts are incomplete, ask the manufacturer to reissue them immediately, or explain that the manufacturer will pay for the spare parts.

4. Install the wardrobe floor.

The first step in installing a wardrobe into the wall is to install the wardrobe floor, which is prepared for the wall by placing the floor on the freshly cleaned floor.

5. Fix the wardrobe structure.

Then install the side panels and back panels of the wardrobe according to the installation design drawings to fix the overall structure of the wardrobe. At this time, the structure of the wardrobe is relatively fragile, and it is necessary to pay attention to the wardrobe to prevent tilting.

6. Fixing the top plate.

Prepare a universal ladder, climb up the ladder to lift the roof of the wardrobe to prevent it from detaching from the side panels, and then secure the roof with 3-in-1 expansion screws.

7. Fix the wardrobe shelf.

Place the shelf where the nut is already embedded and secure the partition. At this point, take care to adjust the fixed position of the shelves, back panels and side panels.

Custom furniture can make full use of the space in the home, and can be completely designed according to the actual situation of the owner, both from the appearance and the use of can fully reflect the personalized needs, therefore, some large pieces of furniture such as wardrobes for customized processing, should be the trend.

But the biggest adventure of custom furniture is that the state of the finished product cannot be fully foreseen when buying, so you must carefully consider when determining the design plan, the designer of the general business will give you the design drawing according to the size and your wishes, many people feel tired of looking at the hasty signature confirmation, and only later did they find that there is something wrong with the product installation.

Therefore, the design drawing must be carefully looked, in fact, it is very simple, let the designer give a little explanation to understand, if there is an inappropriate one, ask to change, at this time must not feel embarrassed to let the designer change.

Due to the particularity of customized products, they are generally non-refundable, so they must be inspected clearly before paying the deposit, especially for the pricing method, custom furniture is generally not only charged by square meters, but all the hardware is also billed separately, so it is best to wait for the product drawings and the first list to come out, and then pay the deposit after confirming it. Drawings and lists should be attached to the contract, and accessories such as plates and hardware should be indicated one by one.

The delivery date of customized products should also be stated in the contract, and pay attention to the agreement on the liability for breach of contract, many times the merchant's agreement is to pay the contract money to the owner for every 1 day of breach of contract, so that if you buy 5000 yuan of furniture, they will pay you 5 yuan a day late, of course, if it is only one day or two late, it may not matter to the owner, so it should be increased in the liability for breach of contract, for example, if it is more than 1 week, there is a greater liability for compensation.

1. Install the door leaf.

Remove the door clamp (F20) pre-installed on the door leaf and place the door leaf on the ground spring (when placed, use plywood to place between the wardrobe mirror door and the mirror frame or other door frames, so as to protect the mirror door and its door frame from damage. And with both frames or with mirrors on the same plane, after the door leaf is placed, the F30-F40 door clamp door shaft is inserted into the F20 door clamp shaft sleeve.

At the same time, the door clamp F20 is re-installed on the door leaf with mirror, adjusted after installation, the switch is flexible, and after the adjustment, the mirror glue and small wooden wedge overflowing from the door clamp will be cut off with a mirror knife compared to the upper end of the door clamp, and the glue shall not be protruding outside the door clamp, and cleaned up and re-glued for modification.

2. Check the materials.

After the wardrobe with mirror door materials are transported to the site, all materials should be inspected to see if they meet the design requirements, check whether the size of the mirror door is correct, the diagonal deviation should not be greater than 1mm, whether the specifications and models of door clamps, floor springs and handles are correct, and whether the accessories are complete.

3. Punch positioning and install the door clamp.

When installing the door clamp, use the door clip on the wardrobe with the mirror to accurately draw out the installation position line and the punching position point and carefully remove the excess part with pliers, use a hand electric drill and 18 mirror drill bits to punch the hole position point, the punching should be operated gently and steadily, and the water should be added with the beating, and do not press down when it is fast, so that it can be naturally penetrated, so that the perforated part with the mirror surface is intact.

4. Wardrobe cleaning.

After the installation is completed, clean the stains on the mirror door of the cabinet with mirror in time with mirror cleaner to ensure the cleanliness of the mirror door of the wardrobe.

5. Measure the distance and install the handle.

The handle is 120-150mm away from the middle seam of the wardrobe mirror door, and the installed door handle is symmetrical, vertical and firm.

1.According to the size of the house, measure the size and make a drawing.

2.According to the CAD drawings, the required plates are calculated and tabulated.

3.After buying the boards, make a simple table saw, rely on the exquisite cutting level or make a simple wooden ruler, and see the boards one by one according to the listed sizes.

4.Splice with a suitable method, if the wardrobe does not move, it is recommended to nail it directly, and the rest can be considered for three-in-one connector connection and cabinet molding.

5.Sanding and varnishing. The style of the door is freely chosen.

If the woodworking board cannot be painted directly, it can only be painted if the veneer is pasted. You can also choose to stick Boeing soft film, which is more environmentally friendly.

It is recommended to directly customize the overall finished solid wood wardrobe to be environmentally friendly and convenient.

The steps of reasonable design of the wardrobe: First of all, you should know how to use the interior space to make the room show an orderly, comfortable and pleasant visual feeling. Therefore, when building a wardrobe, you must first understand the humidity and temperature of the wardrobe, and how to design more beautiful and practical products.

It is necessary to carry out customization according to the interior space design and expand the living home. In the design process, the interior designer will put the wardrobe into the wall according to the relative height and spacing of the wall, which can not only use the top interior space, but also improve the storage function and make the interior space orderly.

When designing, we should determine according to their own characteristics and home decoration design style, so that it is very consistent with the home decoration design style. In addition, in the design, in addition to the scientific and reasonable internal structure, it is also necessary to act on the surface design of the main body to create a complete bedroom interior space. When designing, you should pay attention to the color design pattern of your wardrobe.

For example, there are many colored chests of drawers and doors in the wardrobe. When choosing, everyone should determine according to the style of home decoration and everyone's own preferences.

When designing, you should pay attention to the size and design style of the wardrobe, because the wardrobe is the area where clothes are stored, and its style and size should be easy to use and beautiful. When designing, you should freely match the kitchen cabinets according to the size of the interior space and your preferences, and then pay more attention to the wardrobe aesthetic feeling color tone to create an elegant and comfortable home atmosphere.

Specific focus: Even if the wardrobe is small, there will be a hanging area, the key is to hang clothes, can hang some long coats, can also be short clothes, such a system partition design scheme can make the wardrobe interior space more clean and tidy. The internal structure of the hanging area can also be used to hang more clothes on the clothes rail, and at the same time, long clothes such as long coats and long skirts are also very suitable for placing in the hanging wardrobe area, which is very convenient for access.

Some seasonal clothes can be placed in the folded area, neatly folded, easy to pick and place. Generally, the stacking area is designed in the middle of a custom wardrobe, and there are several storage compartments of the same size, and you can see the stacking area when you open the door, which is especially suitable for storing seasonal clothes.

When designing the interior of the wardrobe, it is necessary to design according to your own requirements, and all areas should be planned, so that it will be convenient in the later use.

There are too many clothes, there is always no space to store, even if you have a cloakroom, it will look disorganized, take a look at the following style of wardrobe, so that the wardrobe looks neat and orderly, with both appearance and practicality!

Wardrobe, also a desk cabinet! The wardrobe is not just a wardrobe, but also a desk cabinet to create a sense of spatial hierarchy and strengthen storage capacity! The wooden wardrobe is more stylish, and the wardrobe side extends to form a suspended countertop, which can be used as an office area, and the whole is perfectly coordinated, and an open storage compartment is set on one side to store documents and books, which is more convenient to access.

The wall cabinet above the desk increases the storage capacity of the entire space, making the most of the space. The black and wood-colored panels are matched together, creating a smooth flow of lines, creating a comfortable atmosphere and bringing a personalized and diverse space experience.

The wardrobe is also a storage "line" home. The wardrobe partition design is reasonable, which is divided into three parts: storage area, hanging area and drawer area. Layer by layer storage flexibly divides the space according to needs, so that you can access the items you need at any time without cluttering the space.

There are three main types of wardrobes: sliding doors, swing doors and open doors.

1. Sliding door:

Also known as sliding door wardrobe or "one" shaped whole wardrobe, it can be embedded in the wall and directly roof to become a part of the home decoration. It is divided into internal sliding wardrobe and external sliding wardrobe: the internal sliding wardrobe is to place the wardrobe door in the wardrobe, which is more individual, easy to integrate, more flexible, relatively durable, easy to clean, and has a high space utilization rate; The external push-push wardrobe is to place the wardrobe door outside the cabinet, most of which are tailored according to the needs of the elements of the home environment, and the space utilization rate is very high.

2. Swing door:

The swing door wardrobe is a traditional way of opening the wardrobe that links the door panel and the cabinet body by pipe hinges, similar to the "one" shaped whole wardrobe. The grade is mainly based on the material and hardware quality of the door panel, the advantage is that it is much cheaper than the sliding door wardrobe, and the disadvantage is that it takes up more space.

3. Open:

The storage function of the open wardrobe is very strong, and it is more convenient, the open wardrobe is more avant-garde than the traditional wardrobe, although it is very fashionable, but the cleanliness of the room is also relatively high, so we must always pay attention to the cleanliness of the wardrobe, basically there are more people and clothes, so home designers have designed an open wardrobe.

How to decorate the wardrobe design:

Do more clothes hanging area, the clothes of the season can be hung directly, and then every time you look for clothes, you can see it at a glance as soon as you open the wardrobe door; Proper stacking area, because the hanging area is relatively occupied by the wardrobe, the same area of the wardrobe, stacked than hanging up to put down more clothes, if the wardrobe is not particularly large, and there are more clothes, when designing the wardrobe, it is still necessary to properly set aside enough stacking area.

The drawer distinction is too low, and the drawer area in the wardrobe is very necessary, which mainly holds underwear, socks and other relatively small clothes; For ease of use, don't make the drawer at the bottom of the wardrobe, otherwise you have to squat down every day to find underwear, and over time you will feel too troublesome, and this drawer will become an idle sundries drawer.

Wardrobe door panels

1. Crystal type.

The crystal board is made of substrate plus white fireproof board and acrylic, and the manufacturers of small workshops use plexiglass; The standard manufacturer uses acrylic, which is environmentally friendly and three-dimensional. The material enriches the design of the wardrobe, plays a positive role, and is deeply loved by the majority of consumers.

2. Solid wood type.

The use of solid wood to make wardrobe door panels, the style is mostly classical, usually at a higher price. Its door frame is solid wood, mainly cherry wood, walnut and oak color. The door core is MDF veneer, and the concave and convex shape is generally made on the surface of the solid wood in the production, and the exterior is sprayed with paint, so as to maintain the color of the log and the shape is beautiful.

3. Melamine veneer type.

The full name of melamine board is melamine impregnated adhesive film paper veneer wood-based board, which is to soak paper with different colors or textures into melamine resin adhesive, and then dry to a certain degree of curing, and then pave it on the surface of particleboard, medium density fiberboard or hard fiberboard, and make it by hot pressing.