The wall is damp and damp, and it is !!!! 50

After this, I went to eat.

First of all, the exterior wall waterproofing does not seem to be done, and the water seeps inside, although it is not obvious, but a little bit of it causes this, which needs to be done first to do the exterior wall waterproofing treatment, brushing waterproof glue is the simplest and most effective, provided that it is a good waterproof glue;

Then it's indoors, 1 first grab the wall skin until the old foundation, 2 brush an interface agent, which can increase the adhesion between the putty and the wall. It can also seal the moisture, 3 scrape twice water-resistant putty, it must be water-resistant putty! 4 Finally, brush the latex paint twice and add less water, so that nothing goes wrong.

Dinner went, I hope you can.

If the wall is not dry and the wall is alkaline, it is possible to find a decoration worker to redo the wall decoration if the floor is low, and it is best to brush the primer.

There are several possibilities for a damp wall:

1. The wall is damp because of the condensate formed by the cold outside the wall and the heat inside.

Therefore, in order to make the interior wall not affected by the outdoor temperature in winter, it is best to add an insulation wall to the indoor wall, so that there will be no condensation.

2. There is a leakage of the embedded water pipe in the wall, which causes the wall to be damp.

The only way to do this is to chisel the wall, find the leak point for repair, and then redo it.

3. Water infiltration of the exterior wall.

Rainwater or air conditioning water is soaked for a long time, and the wall itself is not waterproof, so the wall skin should be shoveled off, and the wall surface can be restored after applying waterproof paint.

To give you a simple and most likely answer.

1 No primer is brushed, and there is alkali return, which causes uneven color.

2. When spraying latex paint, the construction party did not control the recoating time according to the instructions (that is, the second layer was sprayed before the first layer dried, resulting in the destruction of the outermost layer when the water of the first layer evaporated).

3 Sunny or hot rooms It is easy to be overwhelmed after construction.

4. Too much latex paint mixed with water can easily lead to the phenomenon of color paint blooming.

5 Excessive humidity in the room may be the reason for not opening the window for ventilation for a long time.

What should we do when the wall is damp again? Today is a long time to see.

Looking for decoration, let the decoration yourself find what paint manufacturers.

Damp walls and damp homes can cause problems with household appliances, which often bother us and cause some damage to our bodies. So how to deal with the anti-moisture on the wall? What is the treatment method for wall anti-moisture?

Let me give you a detailed introduction below.

How to deal with wall anti-moisture Detailed explanation of the treatment method of wall anti-moisture.

Basement wall anti-moisture performance

Moisture return is the condensation of water vapor at low temperatures, so it is related to the temperature of the wall. On the basement wall, the wall temperature is basically uniform, and even some slight differences are only related to the depth of the wall. Therefore, the amount of condensation on the overall wall should be basically uniform, that is, there should be no wet corners of the wall, while other parts are dry.

Seepage is that groundwater or surface seepage enters the room through the wall, and due to the randomness of the seepage location and infiltration route, only a certain point or area on the wall is wet.

How to deal with the anti-moisture on the wall

1. Use dehumidifiers. When the room is wet, you can use monotonic agents and activated carbon to prevent moisture and absorb moisture. Monotonic agents and activated carbon can be used. There are many monotonic agents in supermarkets that are dedicated to moisture-proof and dehumidification, and the most common are two types: moisture-absorbing boxes and dehumidification bags.

2. Buy an air dehydrating breather, it is like a vacuum cleaner, it can bring the wet air together, and when the humidity is a lot, it will turn into water. Use air conditioner to dehumidify. The air conditioner used in the home generally has the function of dehumidification, but the method of air conditioning to dispatch indoor air humidity is slower, generally takes two or three hours, and will make the indoor stove make people feel cold.

How to deal with wall anti-moisture Detailed explanation of the treatment method of wall anti-moisture.

3. Use lime and bamboo charcoal for dehumidification. Use a small cloth bag to fill the appropriate lime, tie into a small bag and place it in all corners of the room, the lime itself has the effect of moisture absorption, and can also slow down the indoor humidity. Bamboo charcoal dehumidification can be used repeatedly, but it is used more, and the effect is not very good.

The above is the performance of the basement wall anti-moisture and the treatment method of the wall anti-moisture that I brought to you today. You can also log in to view and subscribe to more relevant content and information.

Wall decoration treatment is generally painted or wallpaper, of course, there are some other decoration methods socks and, no matter how to decorate, we can not avoid the problem of wall dampness, so how should we deal with it? Let's take a look.

Dampness on the wall not only affects the appearance but also harms the human body, but the treatment of different walls is also different.

The first type: wallpapered walls. If such a wall is damp, the wallpaper will be warped, deformed and discolored.

I recommend replacing the wallpaper on the entire wall. The color difference between the old and new wallpaper is obvious, the wallpaper has been used for too long, and you may not even be able to buy the same color wallpaper, and the same color may also have a color difference. Therefore, it is recommended that the owner should buy the wallpaper at one time and replace it all.

Or don't use wallpaper directly, and choose moisture-proof functional paint for the whole house to avoid moisture on the wall.

Tips for dealing with damp walls.

The second type: latex paint walls. When we deal with it, we should first scrape out the damp place with a shovel, and then scrape the putty, brush the primer and brush the topcoat.

When repainting latex paint, we should strictly follow the construction methods and construction requirements of latex paint. In order to avoid color difference on the wall, the whole wall can only be repainted, and if it is a white wall, it can be treated with dampness.

The third type: bathroom wall. Bathrooms are the most prone to water leaks.

The ceiling of the bathroom is generally made of aluminum gusset, so there is no need to worry. The light steel keel of the ceiling is generally roaring, and the light steel keel material purchased through formal channels is not easy to be corroded. The tiles on the bathroom wall have become darker or even black when they are damp.

I remind the tile that the color will become darker after being damp, but it will not change color, and the damp simple and good to attack the black tile should stop the brother is a visual error, and the tile will return to its original color after it dries.

If you want to know more about the relevant information about wall damp treatment, please pay more attention, and we will provide you with more complete, more detailed and updated information. Encounter incurable diseases in decoration and have nowhere to ask? There are a lot of cats in the decoration, and you don't know how to avoid it?