How should a well decorated house be accepted? What are the requirements to qualify?

The acceptance of the finely decorated house can be regarded as qualified only if the conditions are met: clarify whether the water pipe material is the standard raw material designated for the motherland, check the pressure to see if there is any problem with it, whether the faucet is smooth, whether there is a problem with filling the leakage, and whether there is a problem with the water body. It is also necessary to check the location of the odor-proof floor drain and water outlet, and observe whether the surface and interface of the sewage pipe are intact.

Inspect the bathroom to see if there is any water seepage. When checking the power supply circuit, see whether the wiring of the circuit is standard, see whether the total number of power sockets is qualified, whether there is electricity, loosening, unable to plug in, etc., and whether the switching power supply route is smooth, you can find a professional electrician to carry out safety inspection.

Seal the inside of the door to see if it is smooth and flat, check whether the door spacing is very large, and whether the four sides of the door meet the size of the door sleeve. See if the sill all-porcelain veneer is parallel to the wall. Whether the window switch is smooth, whether it is airtight, etc.

Check whether the window is water seepage, check whether the window glass is intact, and check whether the window is deformed. The surface of the wall should be leveled without inclination, and the surface of the wall should be observed for protrusions and dents. Check whether the batch putty on the surface of the wall is leveled and intact, and no molting or missing brushing can occur.

Look at whether there are gaps in the wall, hollow walls, uneven tones, vertical angles between the wall and the ground, and vertical flatness errors between the wall feet and the wall.

When handing over the fine decoration, it is necessary to see whether the real estate developer has the prerequisites for taking the house agreed in the agreement, which is to check whether the real estate developer has two books and one table, which is also one of the prerequisites for the fine decoration of the house. The two books and one table are the housing quality inspection report, the housing user manual and the completion acceptance record form. Before the delivery of fine decoration application, fine decoration customers have the right to ask for no reason to see the house, once it is found that I have bought fine decoration has product quality problems, the right to require the real estate developer to overhaul the period, resulting in the adverse impact of the customer's stay, and the real estate developer is responsible for the liability for breach of contract.

When handing over the house, the fine decoration buyer should check the quality of the house carefully by comparing the contract and accepting the house, and do not blindly sign to take the house. When the fine decoration is delivered, we cannot pay the cost of house maintenance and property right certificate, property management fees, etc., which are the responsibility of the developer to help the buyer handle it when handing over the house.

To decorate the house, first of all, you need to check whether the waterproofing is in place and whether there is any water leakage. Then it is necessary to inspect the floor tiles and tiles to see if there are any large areas of cavities, so as to ensure the quality and safety of living.

According to the purchase contract, check whether the orientation, location, and structure of the house are correct, and check whether the two books and one table of the house are complete. According to the material confirmation form, check whether the brand, style and model of the materials used in the hardcover room are consistent. Then use a measuring ruler to check whether the wall and floor are flat.

Use a small hammer to check the walls and floors for hollow drums. Check with an electric pen whether the sockets in the house can be connected to these things, and what I said is qualified if they are passed.

Find a professional person to accompany the acceptance, so that you can see some problems. The thickness of the floor slab should meet the standard, and the floor height should meet the specified standard.

Many people think that the finely decorated house is very good, mainly because the decoration of the house is a troublesome thing, if the buyer is buying a rough house, it is necessary to prepare a lot of time and energy on it, the finely decorated house is relative to the rough house, there is less trouble in decorating the house, and it saves more time and energy for the buyer. Knowing these points is good for regret!

1. Prepare house inspection tools.

Buyers should not go empty-handed to a well-decorated house, and it is best to bring things such as a tester, a tape measure, a small hammer and a flashlight. Electric pen (measuring socket), ruler (measuring length, level) and other tools as much as possible. In addition, the relevant problems must be recorded in writing during the house inspection, so as to facilitate the contact with the Kaihu dealer or its client for rectification, and carefully check during the house inspection, and some details are easy to be overlooked, such as whether the window is sealed perfectly.

2. Check the water and electricity.

It is difficult to accept the finely decorated house, and the water and electricity lines belong to the concealed project, and the ordinary real estate waterways are usually three kinds, tap water, hot water and reclaimed water. Reclaimed water is non-potable water, which is collected and used as rainwater, and is generally used to flush toilets or water flowers. Owners need to know if hot and grey water is available and if they are connected to the wrong pipes.

The circuit refers to the location and matching of the socket, the type of wire and the capacity of the device that consumes the maximum power. This requires the owner to ask the property management company or developer of the community for the basic as-built drawings of the layout of the concealed works such as water and electricity.

3. Pay attention to air quality.

The house that is renovated by itself has to go through a period of vacancy before moving in, because the materials used in the finely decorated house are purchased by the developer, the owner can not control the quality of the materials. Therefore, when handing over the house, the first thing the owner should do is to confirm that the air quality is up to standard, and the materials purchased by the developer must be confirmed to meet the national standards and the harmful substances do not exceed the standard. According to national standards, after the completion of the project, the developer must ask an authoritative organization to conduct indoor environmental testing, and must issue a test report to the buyer.

4. Pay attention to details.

There are many details of the acceptance of the finely decorated house that need to be paid attention to, and the various main materials used in the finely decorated housing project should be accurately marked in the contract, especially the equipment with high brand gold content, such as sanitary ware, lamps, kitchen equipment, furniture hardware, sanitary ware hardware, and multi-functional doors with anti-theft, fire prevention, sound insulation functions, etc., in addition to the brand, it is also necessary to clarify the model of the equipment, and some equipment related to the origin should also be clear about the origin.

Buying a finely decorated house is completely different from buying a rough house, looking at the house and choosing a house and accepting the house when you need to pay attention to the content is not the same, compared with the rough house, the finely decorated house can save a lot of time and energy for the owner, so it is favored by the owner, but many people do not know how to start when accepting the finely decorated house, I hope the content can help you.

Compared with the rough house and the finely decorated house, the buyers are the reason to buy the finely decorated house, because after the purchase of the house, the developer organizes personnel to decorate the house, and the buyer can move in immediately after getting the house, without spending time to arrange the decoration matters, not only saving time and effort, but also the cost of decoration can also be calculated in the house payment to apply for a loan, so how to accept the finely decorated house?

1. Check three books, one certificate and one table.

Three books, one certificate and one table is a mark that the quality of the building cong sail house has been authoritatively recognized by the relevant state departments, and it is a necessary condition for the developer to deliver the house, so the owner must check whether the developer's three books, one certificate and one table are complete before receiving the house.

2. Load-bearing wall and wall inspection.

Whether the load-bearing walls and floor slabs are stressed is one of the key points of concern; The vertical flatness of the wall is the second concern. You can use the visual method to check the uniformity of the color of the wall, carefully touch the wall with your hands, feel the flatness and cracks, especially when inspecting the load-bearing wall and floor slab, to see if there are heavy cracks and penetrating cracks.

3. Check the gas pipeline.

As the most dangerous part of the home, the installation of gas pipes must comply with the regulations, so buyers need to focus on checking the installation of gas pipes when inspecting their homes, including the tightness, pressure-bearing and alarm functions of the pipes.

4. Acceptance of sky, earth and wall.

The construction quality of the sky, earth and wall has a great impact on the function of the house. Detect whether the ground is flat, pay attention to see whether the corner line of the wall is straight, whether there are cracks, and check whether there are hollows on the wall. The installation of the ceiling must be tight, and the connection between the gusset plates should be consistent.

The inspection of the floor should look at the overall fit, and the foot feeling should also be consistent, and there should be no arch deformation or serious color difference. Check whether the floor is warped, whether the joint between the floor and the baseboard is tight, and pay attention to check whether the moisture content of the floor meets the requirements.

5. Acceptance of doors, windows and ladders.

Doors, windows, and ladders should not only achieve beautiful decorative effects, but also have very important functions themselves. The acceptance of doors, windows, and Tiqin Prefecture is of practical significance. Pay attention to check whether the door frame is parallel to the wall, if it is not parallel, it will look ugly from the side after living for a long time.

Check whether the right-angle joints of doors and windows are tight, and whether they will automatically close or open if they are not locked.

In the process of accepting the house, buyers must pay more attention to the use of legal knowledge to reasonably protect their legitimate rights and interests, do not neglect to accept the house because of lazy negligence, check the house to see if there is a quality problem in the house, and find the problem to find the developer in time to deal with it.

With the progress of the times, there are more and more finely decorated houses, so what are the acceptance criteria for finely decorated houses? Only by grasping some details can we guarantee the future home life, find problems in time, and avoid problems. Therefore, let's introduce to you what are the acceptance criteria for finely decorated houses.

1. Look at the "record" and leave "two books". Before moving into the new house, the owner should see a copy of the relevant filing documents of the project to confirm that the project is a legal building; At the same time, the "Residential Quality Warranty" and "Residential Instruction Manual" provided by the developer should be obtained.

2. Check whether the bathroom floor is leaking, and this test is best carried out at the same time as the upper residents. There should be no standing water on a qualified floor, as the floor drain is installed at the lowest point in the bathroom. However, the exception is for rough houses, because a certain height of the floor floor is left around the floor drain.

3. Check whether there is cavity cracking in the plastering of the wall, the ground decorative surface layer and other decorative surface layers. Gently hit with a small hammer, if you hear the sound of "empty", it means that there is a gap between each surface layer and the wall (ground) surface; If you hear a dull bumping sound, they are in good contact.

4. In the top room, be sure to check whether there are traces of rainwater leakage on the top surface of each house. Because according to the requirements of building construction, the houses handed over by the construction unit have either undergone two heavy rain "tests", or the construction party has carried out rain experiments under the supervision of the supervision unit.

5. Generally speaking, most of the cracks on the wall are structural cracks and are not dangerous. Structural problems in houses often occur on balconies, and if you find a crack in the connection between the room and the balcony, it is likely to be a precursor to a broken balcony.

6. Check whether there is seepage, leakage and blockage in the water and sewage pipes. Turn on the faucet, make the water flow as loud and urgent as possible, check the water pressure, and try the drainage speed.

7. If the switch and meter are outdoors, check whether they can control the indoor lamps and sockets indoors, and whether the power is completely cut off indoors after the switch is pulled; If there are openings indoors, they should also be checked separately to see if each branch line is fully controlled.

8. In order to protect the safety of young children, the socket 30 cm high from the ground must be equipped with a safety device.

9. The electric lead resistant pure source socket in the bathroom should be a moisture-proof socket and have splash-proof measures, and the lighting lamp holder in the bathroom must be a magnetic port safety lamp holder, and there should be no socket above the wash basin.

10. The kitchen and bathroom should be arranged close to the ventilation duct, which is conducive to the rapid discharge of odors and exhaust gases, and keeps the indoor air clean.

11. Check the firmness of the switch and socket, especially don't forget to open the line interface of the TV, and pull it a little hard to see if it is false.

Acceptance of new housesWhen paying attention to check whether the wall and ceiling are flat, when the surrounding light is dark, bring a high-power bulb (200W) to illuminate, as soon as the lamp is on, whether the wall and ceiling are flat can be seen immediately through the dark light. If it is uneven, it is necessary to propose to re-fill the putty brush paint, if the part has just been repaired, it will be different from the original color of the wall.

Hardcover room acceptanceWhen paying attention to check whether the drum is hollow, the telescopic drum hammer is padded with several layers of paper (to avoid leaving hammer marks) to knock on the wall to check whether there is a hollow drum phenomenon on the wall. If the drum is hollow, there is a risk that the entire surface layer will fall off or crack. It must be taken seriously.

Hardcover room acceptancePay attention to check the ventilation of the bathroom, and leave a vent under the ceiling. When left on the ceiling, it is necessary to check whether it has the installation with a hand lamp, and at the same time use the first method to measure the pumping force. Use a flashlight to check whether there is construction waste in the flue and vent.

The standard for the acceptance of the hardcover room:

Jin Zheng, director of the Engineering Quality Department of the Home Improvement Committee of the Beijing Construction and Decoration Association, told reporters that at present, there are two acceptance standards used in the Beijing decoration industry: one is the "Beijing Home Decoration Engineering Indoor Acceptance Standards" (this edition will be published one after another), and the other is the "Advanced Decoration Engineering Acceptance Standards".

Which decoration projects should pay attention to acceptance.

Because of the northern climate, some decoration projects may have some problems due to climate reasons during acceptance, therefore, experts recommend that the acceptance of the first focus on the concealed project:

Check the plumbing pipes in the kitchen and bathroom. To see whether the drainage pipe is smooth and whether there is leakage in the upper water pipe, you can fill the vegetable sink, basin, and bathtub with water, and then discharge it to check the drainage speed. To inspect the toilet drainage, it is necessary to perform a drainage test several times to see how well the drain is performed.

Check the distribution lines. Turn on all the light switches and see if the lights are all on. If conditions permit, you should also use a multimeter to check whether the socket has electricity, use the machine to check whether the line has a signal, and use the antenna inspection tool to check the signal of the TV antenna.

Inspect woodworking products and painters. This step is more complicated, simply put, we should check whether the wood products are deformed, whether the cracks are serious, whether the hardware is installed properly and firmly, whether the paint is flowing, and whether the wall paint is cracking on a large scale, which can basically be observed by our eyes.

Inspect the hollowing of wall and floor tiles. Check the hollow drum of the wall and floor tiles in the kitchen, bathroom and other parts, use a small rubber mallet to knock on the tiles and floor tiles at will, if the hollow drum rate exceeds 3%, it means that there is a quality problem (the hollow drum rate refers to how many hollow drums exist in 100 tile floor tiles, and its hollow drum rate is how much).

Check the details. Carefully inspect some corners and corners, such as whether there is a water retaining strip at the door of the bathroom, whether there will be rainwater inflow in the window, whether there are scratches on the switch and socket panel, whether the installation position of bathroom hardware is reasonable, etc.

Check that the brand of the building material is consistent with the contract.

In addition, experts suggest that the owner should also take the time to check the brand of the building materials when accepting the quality of the construction project. It is understood that some owners of finely decorated real estate found that the anti-theft doors, sanitary ware, decorative materials, lamps, and overall cabinets were inconsistent with the original contract brand during the acceptance. The rebranding of building materials and equipment means that the quality of the home may be changed.

The owner should check the difference between the replaced brand and the original contract, and be careful that the grade of the replaced building materials product declines.

Soufang Home Furnishing Public Welfare Home Inspection,