Will the bees run away from the box at night, and what happens when the bees run out of the box?

No, the bees have nowhere to go at night, and even if they do, they will wait until the next day. Why do you want to be boxed at night? Bees will be irritable, it is best to pass the box in the afternoon, after the box is fed white sugar water to calm the mood of the colony, and the next day it will return to normal.

If you go through the box at night, you can't feed it during the day the next day, and if you don't get it right, you'll run away.

First: the nest temperature is too high.

If the nest temperature in the hive is too high, it is possible for the bees to fly out of the box at noon, in this case, we can divide the bee and the bee to judge, observe the activity of the bee outside the box, and determine whether the nest temperature is too high.

1.Bees: If we breed bees, the bees fly out of the box and stay on the beehive or near the door of the nest, and the head is facing outward, and the wings are constantly inciting, which means that the temperature in the bee colony is too high, and the way for the bees to adjust the temperature in the bee colony is to complete it by fanning the wind into the bee colony, in this case, we must pay attention to providing sufficient water for the bees, and also pay attention to shading, but it is difficult to completely avoid this situation, especially in the high temperature season, even if we do a good job of shading and feeding water, This phenomenon still occurs more or less.

2.Italian bees: If we breed Italian bees, the behavior of the bees after flying out of the hive door is just the opposite of the middle bee, because the way of the middle bee fan is to fan the cold breath outside into the hive to achieve the purpose of cooling, and the Italian bee is just the opposite, the Italian bee is to extract the hot air in the bee colony out of the hive, to achieve the purpose of reducing the nest temperature, but the purpose of both phenomena is to reduce the temperature in the bee colony, but the fan mode of the bee is higher in the colony, and the fan mode of the Italian bee The humidity in the nest is lower.

Second: group test flights.

Generally speaking, the worker bee will begin to carry out a short nest test flight at the age of 3 to 5 days, this kind of nest test flight is not concentrated, just sporadic nest test flight, and when there are a large number of new bees out of the bee colony, the bees will carry out a large-scale group test flight, this test flight bees are more, we can obviously see a large number of bees flying around the beehive, head towards the beehive, the distance of the flight is from near to far, the whole process stops after ten minutes, which shows that the bee recognizes the nest test flight.

Summary: For bees' fan cooling and nest test flight, are normal phenomena in the bee colony, in the actual breeding in addition to the worker bees in the case of fan cooling we need to pay attention to the bee colony auxiliary cooling, the nest test flight belongs to the normal behavior of bee biology, we can ignore it.

If our bees have just been put into the hive.

The bees will run out, as long as the bees are put into the beehive, some bees will inevitably run out, so there are two situations, one is the normal bee running out of the beehive, and the other is the abnormal bee running out of the beehive.

First: normal bees run out of the hive Since the bees in the hive are divided into internal bees and field bees, for the bee colony that we have just put into the hive, the work of the internal bee and the field bee is different. For the internal bees, if there is a nest spleen in the hive, the internal bee will normally start to clean the nest spleen, and if there are larvae on the nest spleen, the internal bee will also feed the larvae.

At this time, in fact, the field bee is not working, so the field bee will run out of the hive, but the field bee will not fly away immediately after running out of the hive, but fly around the beehive, which is mainly caused by changes in the environment, the field bee has to go through a new nest test flight, so there will be more field bees flying around the hive, and the flight distance gradually becomes farther. If it is not a large number of bees flying out of the hive, it is normal for the field bees to fly out of the hive and around the hive, and the internal bees to carry out normal feeding or spleen-making work.

Second: abnormal situation, if a large number of field bees fly out of the hive, although some bees fly around the hive, but a large number of beehives gather at the hive gate, the internal bees do not have a spleen, and a large number of bees are crowded at the hive door, indicating that this phenomenon is abnormal, the bees are preparing to escape, if there is a king piece, even the queen bee.

It will also be at the location of the nest gate, and no matter whether the internal bee or the field bee will pour out of the nest door, indicating that this is a precursor to flight.

It's normal for you to be a novice beekeeper and run out because you don't have an anti-escape piece installed.

<> bees divide the bees, if there is a hive next to it, the probability of the bees entering the hive directly is very low, unless the bee colony happens to stay in such a position. A beehive is placed next to the bee colony, and the bees need to pass two major tests to enter this hive when they are dividing the bees: first, when the scout bees are looking for new nests in large numbers, this hive has been found by the scout bees; In the process of choosing a new nest, this new hive was also selected as the best place to live.

1. Will there be a beehive next to the bee dividing bee into the box?

1. The probability of bees splitting bees directly into the beehive next to them is very low. A beehive is placed next to the bee colony, and the bees need to pass two major tests to enter this hive when they are dividing bees: first, this hive has been found by the scout bees when they are looking for new nests in large numbers; Second, after the bees are divided, in the process of choosing a new nest, this new hive is also selected as the best place to live.

2. Although the probability of bees entering the beehive directly next to them is very low, it also exists, which is not the progress of bees, but the bee group just stays in such a position. When bees clump apart, if they clump on or near an empty hive, when the bees discover the hive door, there is a good chance that the bees will enter the hive, and then the colony will temporarily decide to live in the new hive, especially if there is a residual smell of beeswax in the empty hive.

2. How to place beehives

1. The best way to trap the bee group in the bee colony is to set the bee trap at a position of 30m opposite the beehive, and you can set up more bee traps and wax them in the beehive. The beehive that the bees enter after the bees are divided is not placed flat on the ground, and the beehive is generally more than 50cm from the ground, and it appears in the position where the bees often clump in the apiary, so such a beehive bees may fly directly into it and will not clump.

2. The beehive can be selected close to the nectar source, and it should be noted that the bees can make reasonable use of the nectar source, which is generally the mountain nectar source and the flat nectar source. Camouflage can be added appropriately, such as covering with branches and weeds, which can have a natural-like effect and is more acceptable to bees. It should also be placed in a place with a wide field of vision, so that the detection bee can successfully find the beehive.

Steps: 1. Flip the nest box: clean the bottom of the nest box, then flip it 180 degrees and put it on flat ground or another empty box;

2. Drive bees out of the spleen: open the bottom plate of the trap box or the end of the bee bucket without the nest door, put on the bee collector, spray smoke to the nest door, and the bees will enter the bee collector when stimulated by the smoke;

3. Cut the spleen: cut off the base of the nest spleen, which can be placed flat on the backing plate;

4. Cutting the spleen: use the nest frame as the specification to cut, and the upper end of the cut spleen should be close to the upper beam of the nest frame;

5. Tie the spleen: put the nest frame of the tied wire on the top of the cut spleen, the upper end of the nest spleen must be close to the upper frame beam, along the lower edge of each wire, use a cutter to draw a small slit on the nest spleen, the depth is half of the thickness of the nest spleen, press the wire into the nest spleen with a knife or a small bamboo piece, and tie the nest spleen to the upper frame beam with a rope at the lower end of the nest spleen;

6. Pour the bee into the box: put the spleen into the beehive, keep the bee path, close the nest door, shake the bee into the beehive with the spleen of the nest, and close the lid of the box.

Steps: 1. Flip the nest box: clean the bottom of the nest box, bring it bright and then flip it 180 degrees, and put it on the flat ground or another empty box;

2. Drive bees out of the spleen: open the bottom plate of the trap box or the end of the bee bucket without the nest door, put on the bee collector, spray smoke to the nest door, and the bees will enter the bee collector when stimulated by the smoke;

3. Cut the spleen: cut off the base of the nest spleen, which can be placed flat on the backing plate;

4. Cutting the spleen: use the nest frame as the specification to cut, and the upper end of the cut spleen should be close to the upper beam of the nest frame;

5. Tie the spleen: put the nest frame of the tied wire on the top of the cut spleen, the upper end of the nest spleen must be close to the upper frame beam, along the lower edge of each wire, use a cutter to draw a small slit on the nest spleen, the depth is half of the thickness of the nest spleen, press the wire into the nest spleen with a knife or a small bamboo piece, and tie the nest spleen to the upper frame beam with a rope at the lower end of the nest spleen;

6. Pour the bee into the box: put the spleen into the beehive, keep the bee road, close the nest door, aim the bee at the nest and shake the spleen into the beehive, and close the lid of the box.

It is necessary to pay attention to the temperature and do it at the right temperature, so that problems can be effectively avoided.

Be sure to choose the right box and do the job at a time when the temperature is more suitable, preferably in the spring.

Summary. The sweltering heat and lack of oxygen in the beehive make the colony uncomfortable. See if the honeycomb door is open and small, and whether the cloth is not breathable.

Then see if the bee colony in the beehive is too dense and whether the bee path is compressed. Then open the honeycomb door wider, and open the ventilation window if there is a bottom window. The bee colony is strong, and when the temperature is high, the bee road should be widened.

More than six-legged spleen bees, to add a relay box, increase the space to breathe and comfortable. If the covering cloth is a non-breathable chemical fabric, you can roll up the corner without bees, which will be more breathable and <>

My bees go into the box during the day and don't at night.

The sweltering heat and lack of oxygen in the beehive make the colony uncomfortable. See if the honeycomb door is open and small, and whether the cloth is not breathable. Then see if the bee colony in the beehive is too dense and whether the bee path is compressed.

Then open the honeycomb door wider, and open the ventilation window if there is a bottom window. The bee colony is strong, and when the temperature is high, the bee road should be widened. More than six-legged spleen bees, to add a relay box, increase the space to breathe and comfortable.

If the covering cloth is a non-breathable chemical fabric, you can roll up the corner without bees, which will be more breathable and <>

If there is paralysis, cystic larval fungus, etc., or there is a bad smell of decay in the beehive, and then there are ant infestations, nest insects, mite infestations, etc., it will make the bee colony irritable and run outside the beehive. If you find out the best and find the enemy, you have to quickly prevent and control it, and you can't let the pests and diseases continue to <>