What should I do if my computer s disc driver is missing and I want to install the printer

Your computer disc is lost, you can open the case, take a look at your motherboard model, or look at the model on your motherboard manual, and then go to the official website** motherboard driver disc of the same model is OK, if you want to install the printer, generally when you buy a printer, they will send a driver to you, which is not a price with the motherboard's CD, you just need to install the printer's driver CD installer, you can connect the printer, find a new hard disk, pop up a software installation wizard, You click on automatic installation, it's OK, restart the computer, and it's ready to use.

If there is no computer driver, it does not affect the printer driver installation, and the printer can be installed even if there is no printer driver CD.

3. After clicking to install, the installation interface will prompt whether to install a printer or repair the local program, if it is the first time to install the printer or reinstall the system, select "Add another printer", if it is a later use of the printer error, you can choose "repair".

4. After selecting Add Printer, the operation interface will prompt you to plug in the printer and connect the data cable to the computer and the printer.

5. After the printer is connected to the power supply and the data cable is connected, then turn on the printer switch, and click Next to start the local installation of the printer.

6. After waiting for a short period of time, you can see the prompt that the installation is completed, and after the installation is completed, there will be "Congratulations!" software installation is complete", after which the installation interface can be closed, and the printer has been successfully completed.

If you can't find the driver when installing the printer, you can update the driver by doing the following:

Prepare materials: computer, printer.

1. Click the [Menu] button in the lower left corner of the computer desktop, <>2, in the open start menu, click the [Equipment and Printer] option on the right side, <> 3, and then take a look at the error prompt just now, use the printer, find it first, <>4, and then right-click on the printer, click the [Properties] option in the pop-up option, <>5, in the open window, click the [Hardware] option above, <> 6, and then in the interface entered, if there are multiple devices, After selecting your own printer, there will generally be an error prompt, click [Properties] and <

7. Then in the driver option of the open window, click [Update Driver] to complete the driver update installation, and the problem of not finding the driver when connecting the printer is solved.

The specific solution is as follows:

<>4. Go to the service page, find and left-click in the name column: print spooler.

5. Enter the properties interface of Print Spooler, and select General in the menu bar at the top of it.

6. In the middle of the regular interface: Start Type, Crack Rent Selection: Automatic.

7. In the lower part of the regular interface, click: Start, and after confirmation, click "OK" at the bottom of the interface.

8. Print Spooler is starting.

9. After starting, return to the properties interface of Print Spooler, and the service status will display: Running in response, restart the computer, and the computer will find the printer connected to it.

The steps to solve the problem are as follows:

1. First of all, check whether the power cord of the printer and the data transmission cable are connected.

2. Then open Device Manager - click on Print Queue - select FX - select Settings.

3. Then select the device and printer folder, and right-click to delete the device.

4. Finally, right-click, and then add and install the printer driver.

You can reinstall or repair it, you can use the 360 driver master software to install or repair the driver.

Summary. Hello, teacher, you can check whether the interface between the printer and the computer is connected normally.

What should I do if I install the printer driver but can't find the printer?

Hello, teacher, you can check whether the interface between the printer and the computer is connected normally.

Normal. This printer is also not shown here.

Hello teacher 1, right-click on this computer on the desktop, select management, services and applications, select services, find and double-click print on the right side double-click, change the startup type to automatic, scatter the ridge and punch the startup below the service status, click OK to close the wild defeat program, and restart the computer.

Good. You try the teacher, and contact me if you have any questions.

Why can't I find the printer driver installed and browsed in the D disk?,Other information has been seen.。

Or follow my steps to turn it on.

Good. Then see if the drive is suitable.

If you haven't had a driver, go to the official website to get the driver according to the model, and then unzip and run the installation. Alternatively, you can use a printer guard.

If you have already written the driver, you will first delete the original talk drive and start over. (Right-click on the printer in the control panel, view the cherry width properties, view the driver details, you can see the folder where the driver is located, and delete all the files in the folder).

If you can't find the driver when installing the printer, you can update the driver by doing the following:

Prepare materials: computer, printer.

1. Click the [Menu] button in the lower left corner of the computer desktop, 2. In the open start menu, click the [Device and Printer] option on the right side, 3. After that, take a look at the error prompt just now, use the printer, find it first, 4. Then right-click on this printer, click on the [Properties] option in the pop-up option, 5. In the open window, click on the [Hardware] option above, 6. Then in the interface entered, if there are multiple devices, choose your own printer this device, Generally, there will be an error prompt, click [Properties], 7, and then in the driver option of the open window, click [Update Driver], the driver update installation will be completed, and the problem of not finding the driver when connecting to the printer will be solved.

Hello, I'm glad to answer for you, please later, I'm working hard to sort out the answer for you, and I'll reply to you within 5 minutes.

The printer driver is installed, and the system file cannot be found when printing because the automatic option is not enabled. 1. Right-click "My Computer" and select "Manage". 2. Find "Services and Applications" and click "Services".

3. Find "printspooler" and click on it. 4. Select "Automatic" in the "Startup Type" drop-down menu.

5. Click the "Start" icon under "Service Status".

6. Click "Apply" and "OK".

First of all, the network is connected to the printer, double-click the printer directly, and the ** you go in is the model. There is that manufacturer in the printer properties**. Then search for the model driver. General Sky**, and then there's that auto-installer installed inside.

2.Then open "Control Panel" - "View Devices and Printers" in order.

3.Click "Add Printer", then the printer shared on the network will appear, click on the printer, and then click Select.

4.The printer will be added successfully, and then connect to the shared printer without the problem of "driver not found".