My Nokia 7610 driver won t install

First of all, your machine is a DKU-2 or CA-53 data cable.

Connect via a data cable.

If you are using a DKU-2 or CA-53 cable for connection, please proceed directly to the following steps:

Step 1: Open the installed PC kit and "Get Connected" will walk you through the configuration process of the type of connection you want to use. Click Get Connected.

Back to Top Step 4:

When prompted to "Get Connected", connect the cable to your PC and then connect the other end of the cable to your phone.

Step 5: The connection setup is complete, click "Finish" to exit the wizard.

Step 6: Now that you have successfully connected your phone to PC, you can open the PC suite in the main menu window and start using it.

This is the latest version of Nokia's official ** driver, try it down, it may be that your disc has a problem with the bar.

If you can't install this one, then it seems that your prompt is not enough memory, turn off some background programs and try again.

There is a problem with the disc There is a batch of 7610 discs that don't seem to be usable There are no very important things on the disc are all PC kits Instructions for use ** device etc These can be to the official **** of nokia.

Go there for the next drive.

If you are too troublesome, you can go to customer service.

Go there for the next drive.

is better than a CD.

N70 is a smart phone that can install software, but not all software can be installed, depending on the following aspects.

3. There is also some software that needs to be signed with the name of the software to sign the bright draft, and you can install it after signing, which is a bit difficult, you have to apply for a signing certificate first, and then sign the suffix named sis into a search for sise. Look at these 3 points that you didn't get right. It has nothing to do with the PC suite.

In addition, the grid machine is formatted, the phone memory formatted, after the grid machine will have nothing in your mobile phone, do not grid the machine until the last resort.

Let's get off the plane

Grid machine is generally in the mobile phone junk files too much, serious errors can not be recovered or the phone is abnormal, the grid machine will clear all the contents of the C: disk, and then write to the new system to grip the hidden information, so please back up the data and information you need before the machine. There are three types of lattice machines:

1. Soft grid: enter * on the mobile phone, and then ask you to enter the lock code, the initial password is: 12345, if you have changed the mobile phone password, that is the changed password (not the SIM card password), and then a white screen appears, only the word nokia is displayed, and it will be completed after 1-2 minutes, and the mobile phone time will be re-entered after the grid;

2. Hard grid: turn off the computer first, press and hold the dial key, "* key, "3" key while turning on the phone, turn on the power until the word "nokia" appears, this process can not release any button, wait a few seconds until "formatting...... appearsword, then you can release the key. After 1-2 minutes, the system format is completed, and the mobile phone in the hall will automatically restart and enter the standby screen, and re-enter the mobile phone time;

3. Through the software grid: install the systemtools software, there is a formatting option in it, you can enter the lock code to grid the machine.

There are a few points to pay attention to in the above grid: keep the power absolutely sufficient, do not try to shut down the grid on the way, can not plug in the charger, etc., if it is violated, it may cause serious consequences such as burn-in. There is also a hard grid may be a little damage to the hardware of the machine, not to be foolish, do not use the hard grid when the machine can not be turned on, and one thing to note is that the line 2 will disappear after the grid, and it must be restored to the kf flash.

But you have to back up your stuff before.