What are the production processes for the printing of books and periodicals

There are two main categories of production process for book and periodical album printing: 1. Paperback book and album printing and binding 2. Hardcover book and album printing and binding.

The daily paperback book is the paperback book in our printing house, so the paperback production process is carried out according to the following process: 1, cutting the flat paper 2, printing 3, cutting and printing the flat sheet 4, folding 5, locking the line (also called string line, according to the actual requirements of the book or cost saving can not choose this process, the role of this process is to make the whole book between the pages firm and firm, not easy to tear the loose pages) 6, Glue binding (that is, hot melt glue is usually used on the position of the spine of the book on the glue binding linkage equipment, so that the inner text of the book is tighter and the cover of the book is more suitable for the effect) 7. Cut three sides, that is, according to the actual requirements of the finished product size in the book mouth and the head, the three parts of the book tail are cut at the same time.

The process of hardcover books and periodicals is based on the process of paperback books, the cover treatment process is more, the material selection is different, the general cover will use the combination of gray board mounting paper, or use some soft leather as the cover, then it requires the operation of large-scale binding technical equipment hardcover linkage machine, and the bonding technology of the lining page and the cover is more demanding. According to the cover material, hardcover books are generally divided into hardcover hardcover books and softcover hardcover books, and according to the spine process, they are generally divided into round-ridged hardcover books and square-spine hardcover books, as well as more special hardcover books. The process flow is printing-cutting-folding-sewing thread-spine glue-mounting, cover shell-upper shell-finished product.

In addition to the binding process, there is also a printing process, which generally uses froga39 to check whether the color of the digital manuscript meets the color management standards, and then adjusts the curve appropriately to ensure the color effect before printing on the machine.

Books and periodicals generally use 4-color printing technology, that is, daily color printing, and the factors that affect the color effect include ink, paper, equipment, and temperature. Generally, the Heidelberg four-color printing press with high-quality soybean ink, the color management standard for debugging, and the rich experience of the printing technician can get the high-quality printing process effect.

The above is experience, if it helps you, thank you!

The product album is a specific display of a product information, which is usually an indispensable part of the company's marketing promotion. Product album design and printing production is one of the important aspects of product image, this article will introduce the production method of product album from the aspects of design, printing, and binding.

How to design a product brochure?

First of all, the design of the product album needs to conform to the characteristics of the product itself, the audience of the product and the core concept of the enterprise. There are many technical processes that can be carried out in the design of the album, such as the use of special materials, the scanning and copying of images, etc., to obtain the best design effect without violating the design concept.

How to print a product brochure?

Printing is the most critical linear cost in the whole production process, and it is also the basis for the systematization of product albums. After the completion of the beta version, we need to adjust the printing base color, sauce plate, color, proportion, etc. according to the relevant rules according to the sample requirements and digital layout requirements, so as to ensure consistent, pure and beautiful colors. In the printing process, it is necessary to focus on illumination, aerosol, cylinder, color matching, post-processing, printing materials and other links to ensure that the quality of the printed picture is good.

How do I bind a product book?

The binding of the finished product album is the last step of the systematization of the whole production process, and it is usually necessary to choose according to the characteristics, goals, weight, etc. of the album. Binding usually has a variety of forms such as perfect binding, thread binding, saddle nails, etc., which can be used flexibly according to the actual situation. After the binding is complete, it also needs to be packaged, sent, and protected in a variety of ways to ensure the safety and integrity of the product book.

A product brochure is an important marketing tool, and you need to try to achieve the best design and production effect in all aspects. In the design process, it is necessary to fit the characteristics of the product, emphasize the color selection of the picture design, and follow the best practices to obtain the best practices. In the printing process, it is necessary to pay attention to illumination, aerosol, cylinder, color matching, post-processing, printing materials and other links to ensure good printing quality.

At the same time, choose the appropriate binding method to ensure the safety and integrity of the product brochure, so as to produce the best publicity effect.

The most common picture album is basically coated paper is printed by the first bi, coated paper according to its different thickness is divided into: 105g coated paper, 128g coated paper, 157g coated paper, 200g coated paper, 250g coated paper, 300g coated paper. The vast majority of corporate brochures will be printed with 200g as the cover and 157g as the inner page of paper materials, which is the easiest to print and the cheapest.

There are also materials that use special paper on the cover, coated paper on the inner page, and corporate brochures printed on special paper. Shanghai Nancai printing: the use of color printing is the most important process of corporate brochures, all pages of color printing, bound up to print into a book, that is, it is clear that the person can stare at it.

The common printing processes of album printing include lamination, UV, hot stamping, hot silver, embossing, die-cutting, etc.; The binding methods include saddle nails, glue binding, glue binding, ring binding, etc.; Commonly used paper, cover copperplate bridge fiber paper matte paper: 300g, 250g, 200g. The inner page is 250g, 200g, 157g, 128g, 105g, and some customers use fine paper.

This Zen elimination is a regular album requirement, like the customers we meet, will often send some other sample brochures, let us do it according to the sample brochure process. There are samples of paper samples, and we can also print and customize them according to the sample process.

Printing process.

1. Film and proofing. The original manuscripts used in printing are generally divided into text manuscripts, picture manuscripts, photographic manuscripts, etc. Those who have recently used the physical object to directly separate colors can avoid the waste and color loss of the original manuscript.

2. Imposition, exposure PS version. The output is sent to a PC film that can be printed by the device, and the technical term is film film. The PS version can be printed on the machine with a film film, which is equivalent to the first negative. It is an indispensable process for precision printing.

3. Printing on the machine. Imposition, exposure PS plate, and the film used in printing and plate making are called film films, and in order to chase color when printing, film films must be produced, otherwise they cannot be printed. Out of the film is to make a good layout.

4. Post-processing, pasting (envelopes, handbags, packaging boxes, hardcover book covers, card boxes).

5. Inspect the cloth factory, binding (glue, hardcover, saddle binding, flat binding, simple binding, sticky surface).

Precautions. 1. Pre-printing: the process of completing film and proofing is calculated per P, design, filming, proofing, printing, and imposition are generally priced in A4 units (210 285), if there is a fold, calculated according to the actual size.

Film film is a necessity on the machine, and printing proofing is the most basic basis for the machine to check the color.

2. Printing: The key link to the completion of the print is printing, and the pricing standard is the color order, that is, each color of each Qi Zhengling paper, and the folio is generally printed from 5 orders, and less than 5 orders are calculated according to 5 orders. If there is a spot color, such as a special pattern for enterprises to print spot colors (pantone ink) or gold printing, silver printing, etc.

Please be sure to indicate that it will increase from 4 colors to 5 colors and 6 colors.

Design process: 1. "The two sides communicate with each other": 1. The two sides communicate the basic intentions; 2. The customer puts forward the basic requirements for production, and we provide it; 3. After the customer basically approves our **, the relevant design information should be provided; 4. At the request of customers, we can provide free cover design and one to two pages of inner page design for customers to determine the design style.

2. "Confirm the production" 1. The two parties sign an agreement; 2. Customers provide specific information; 3. The customer pays the advance payment.

3. "Scheme Design" 1. According to the customer's opinions, we will make corresponding adjustments to the design draft, and the customer will finalize the draft after review and confirmation; 2. After all our designs are completed, the customer confirms.

Fourth, "finished draft" 1, after our design is completed and confirmed by the customer, submit the black and white draft to the customer; 2. The customer reviews and proofreads the content of the copy, and signs after confirmation; 3. We will revise the design draft according to the customer's proofreading results and produce a color inkjet draft; 4. The customer reviews again, proofreads the color, and signs after confirmation; 5. Complete the production, make a hidden proof, and the customer confirms and signs; 6. Printing production.

5. "Delivery Acceptance" 1. The customer shall pay the balance according to the contract acceptance; 2. Customer file entry.

6. "Customer Service Tracking" 1. Customers can contact our company through telephone or e-mail; 2. After the contract is completed, if the customer needs other services, he can sign another contract to complete it. Hot stamping, hot silver, glue, oil, lamination, etc., are all printed from the printing process.

1. Elements of thinking. The thinking elements we are talking about here mainly refer to the design ideas and design methods selected in the process of brochure printing design, and the brochure printing products designed and produced by different thinking elements will also produce different effects.

2. Relevant elements. Relevant elements refer to the distribution and coordination of the design content of each part of the brochure printing product in the process of brochure printing design, as well as the changes and arrangement of the brochure printing product in terms of design layout.

3. Visual elements. The concept of visual elements is relatively easy to understand, any brochure printing products are inseparable from visual elements noisy, how to be able to convey a better visual effect through the color design of the brochure, should be a problem that the hall guesses the professional brochure designers strive to solve.

Fourth, practical elements. The practical elements we are talking about here mainly refer to the main content and design purpose embodied in the brochure printing products, and we can learn more information and content through the brochure printing megafiber products.

Zhonghui Design (professional album design company) answer:

In album design and printing, the commonly used paper is as follows:

Ice white coated paper: This kind of paper is usually used in albums with very high requirements for color reproduction, such as product albums in clothing, jewelry and other industries. It has a smooth surface and works well in color reproduction.

Matte coated paper: the surface of matte coated paper has a certain roughness, which can improve the texture and layering of the album, this kind of paper is also more commonly used, usually used in corporate brochures, product introductions, etc.

Offset paper: Offset paper has a smooth surface and is more suitable for printing words and patterns. This kind of paper is easy to fold and process, so it is more commonly used in folding albums.

Bleached kraft paper: The surface of bleached kraft paper seems to have a natural feel, and it is often used to make handicraft albums, such as handmade leather products, handmade paper art, etc.

Pearlescent paper: Pearlescent paper has a certain metallic luster on the surface, which is very suitable for printing albums that require a high gloss effect. This paper is often used in product brochures in industries such as beauty cosmetics and luxury goods.

Zhonghui designed original album works.

Generally speaking, coated paper is more commonly used, and coated paper is divided into two kinds: Yaguang copper and double-light copper, which can be. Because coated paper prints albums, the restoration effect of ** color is the most ideal. If you have special requirements, you can choose some special paper, you can let the service provider bring special paper patterns by you to choose, and then don't worry about letting the service provider try to print a few pieces of paper you choose to see the effect, of course, the cost is paid by you.

There are many types of special paper, tens of thousands of kinds, and it is inconvenient to talk about them one by one here. However, it is not right for the person to go to the store just now, the printed paper is not available in the store, it is sold by professional paper stores, and they are generally not operated externally, they only serve printing companies and advertising companies, design companies and other legal entities.

How to design the album printing. Printing company brochure design is a very basic job. Generally speaking, in this process, we are mainly responsible for the overall conception of the album, and combine the elements of the album, such as **, text, and color.

Albums are used to reflect the concerns of a company and brand, and are targeted advertisements that allow consumers to see these albums when browsing albums and understand the culture and strength of a company. Brochures need to be linked to businesses and products. Therefore, the album must be targeted.

Therefore, in the creative design of the first world, it is necessary to establish the corresponding design and planning process. Before designing a brochure, it is necessary to communicate with the designer. After communicating with the designer, the designer must understand the purpose of the album and the type of album, so that the designer can better design and express the content to be promoted, how to reflect the characteristics of the product and its advantages.

Gree filial piety, the best designer in the design of the picture book.