How to maintain the battery of Huawei Honor 6 mobile phone make the battery like you just bought it

Mobile phone batteries are subject to daily wear and tear, but the life of the battery can be extended through healthy use, and you need to pay attention to it in daily use

1.It is recommended to use the official standard charger to charge the battery to ensure that the charging voltage is stable and meets the standard.

2.Theoretically, keeping the battery in the middle range of power for a long time (around 50%, such as 30%-70%) is more conducive to prolonging battery life, therefore:

It is recommended to unplug the phone in time after it is fully charged, as the phone will be in a high power state for a long time, which will cause the loss of the battery to accelerate.

Try to avoid waiting until the battery is below 20% charge before charging the battery, as over-discharging can cause the battery to wear out faster. It can be charged as you go to prolong the life of the battery.

It is recommended not to leave the phone idle for a long time, and the battery should be fully charged from time to time. If the phone is not used or charged for a long time, the battery will be completely consumed, which will lead to abnormal charging or failure to charge.

3.A battery temperature that is too high or too low will affect your phone's battery life, therefore:

Try to avoid placing your phone in an environment with low temperatures, high temperatures, or large temperature differences.

Try to avoid using your phone while charging. Using the phone while charging can easily cause the phone to heat up, and discharging it for a long time at high temperatures will exacerbate battery loss.

You don't have to worry about this, the battery is not maintained with any software, and after a long time, the lithium ions in the battery will attenuate, which is normal, so after a long time, the battery will not work.

I maintained it from a usage habit.

When the power is used to 20, you have to charge, don't wait for it to automatically shut down and then charge, don't turn it off if it's okay, because restarting the phone has a certain damage to the CPU, don't play with the phone while charging, this will increase the current of the phone by two times, and the body will heat up seriously, which is very harmful to the phone and the battery.

The first point is to understand the specific parameters of your own mobile phone, and use the original charger as much as possible. If you don't have the original factory charger, then, you need to use a high-quality charger, generally speaking, Huawei Honor uses a 2000 mAh charger is appropriate, don't use it indiscriminately. If you don't know the parameters of the phone and the battery, then a principle, low is not high.

Too high a fast charge will consume the battery and the normal life of the phone. Second, try to minimize overcharge, charge to eighty, or to ninety-nine, do not charge again, if the mobile phone does not have the function of anti-overcharge, it will be easy to lead to the short life of the battery. It's easy to get a dog's nose, remember.

Third, if it is a Huawei or Honor phone with a large battery, a larger battery of more than 3,000 mAh is best to use up all the power every week until it automatically shuts down. My Huawei Mate8 started in 2014 and now in 2021, and the battery is no different from new, that's how it works. This is a matter of experience.

I usually go to charge it every Sunday or weekend when the battery is drained and it automatically shuts down. Huawei batteries are notoriously durable and durable, but you have to be able to use them and maintain them. However, if your phone is less than two dry milliamperes Huawei or Honor, try not to run out of battery, then it will be short-lived, to be about 15% of the power, just pay attention, start charging, don't exhaust all the power before shutting down.

Third, pay attention to the ambient temperature of your phone. Generally speaking, you don't need to pay special attention, just remember not to use your phone for too long. In addition, if the air humidity is too high, that is, the weather is too humid, just turn on the machine more, which is an idea that many small electrical appliances need to pay attention to.

Finally, be careful not to charge while playing, this is the last and most important.

1: Adjust the screen brightness.

2: Clear unnecessary apps in the background.

3: Turn off the daemon program that consumes data to save both power and traffic.

4: Optimize power consumption.

5: There may be some malicious third-party software running in the background, it is recommended to back up the data and restore it to factory settings to see if the standby time is extended.

7: Go to Settings - Advanced Settings - Battery Management, set it according to your needs, select the power-saving mode, and achieve the best power-saving state.

Here's how to take care of your phone's battery:

1) Please use the original charger to charge the battery, ensure that the charging voltage is stable and meets the standard.

2) Please try to avoid using your phone while charging. Charging while playing can easily lead to high battery temperatures, and long-term discharge at high temperatures will exacerbate battery loss.

3) Please try to avoid waiting until the battery level is lower than 20% before charging the battery, the more the battery is discharged, the greater the loss of the battery. It can be charged as you go to prolong the life of the battery.

4) Please do not idle for a long time, and fully charge the battery from time to time. If the phone is not used or charged for a long time, the battery will be completely drained, which will cause abnormal charging or failure to charge.

5) Please avoid placing the mobile phone in an environment with low temperature, high temperature or large temperature difference, otherwise it is easy to affect the battery life of the mobile phone.

1. Turn off the hand first, and then heat the different corners of the back cover with wind blowing, (the circulating heating time is 1-2 minutes, according to the air volume and temperature of the blowing, make your own judgment) to melt the glue and reduce the viscosity.

2. Use suction cups and paddles, use suction cups to slowly pull the corners into the paddles, and slowly pull them apart at the back.

3. When disassembled, a small Phillips screwdriver is needed to remove the speaker at the bottom.

4. After dismantling, it means that the mobile phone will not be maintained, one of the screws has a watermark anti-dismantling white sticker (there is also a watermark label at the charging hole), if your mobile phone is out of warranty or broken If you like to do it yourself, the white sticker will not stop you.

5. When the battery contacts are cut off, at this time the crowbar and paddle are needed to remove the battery, and now the manufacturers of mobile phones with built-in batteries basically use a large area of glue to bond the battery, so the dismantling is quite complicated and laborious, while dismantling it is necessary to pay attention to the layout around the battery, such as the wiring dark line, etc., so as not to break or break it in the later stage, the gain outweighs the loss, some dismantle the built-in battery like to use hot air to heat the glue to make the glue melt quickly, but I don't like to use hot air, first; The battery itself is a chemical substance The chemical state is unstable at high temperature, second: the LCD screen under the battery can not use hot air, because the position of glue bonding is under the screen If you want to use hot air to bake First, the screen is very hot, and the temperature has not passed, and the second is baked from above the battery, which is also not possible, so I slowly warped the battery with the help of a crowbar and a paddle (when dismantling the battery, there is a black plastic cover on the top of the battery) and slowly warped the battery out little by little with unremitting efforts.

6、When I saw the cable of the screen here,Sure enough, Huawei is still very user-friendly when considering the design,There is no excessive use of all the glue for bonding,(In the past, when I dismantled other machines, I found that there were a lot of glue wires under the battery, and there were dark lines, and it was easy to tear off if you didn't pay attention to the wires) Consider later maintenance and battery replacement。

7. After dismantling, there is no glue on the display line, and there is a middle frame between the battery and the screen, so the glue will not cause harm to the screen, and the new battery is compared with the old battery. After changing the battery, test the battery, turn it on and run to check the battery level, etc.

8. After working for a while, each will run normally and charge without any problems, and after confirming that the battery has no problems, it will be restored, and the external speaker will be restored (restored and shut down during installation), the last step is the box cover, first of all, the glue before the edge of the back cover and the edge of the machine should be completely removed to ensure the adhesion of the new glue.

9. After the glue is cleaned, start to prepare for the glue. (This glue is double-sided tape, after it is pasted, tear off the white, and the inside is black).

10. Finally, the box lid, pay attention to the edge of the box lid after the four corners are aligned after leveling, and then you can press vigorously or blow the edge with hot air, and blow the heat without too long and then press hard to help the glue be more bonded.

11. Check whether the edges are fitted, and complete these, indicating that it has been successful.

Regarding the charging of the mobile phone battery, don't do anything "full hours to activate", that will damage the battery a lot, and don't charge it every time, it's not good. Charge as you go, it's best to keep it at full, of course, it's okay to use it almost in the rush. The main thing is not to charge for a long time to "activate", just charge normally.

Now the mobile phone battery is a lithium battery, there is no memory effect and activation of the statement, so there is no need to charge for more than 12 hours, and now there are many words on the market are harmful to lithium batteries, 1, the charging time is too long to cause the battery to burn out, although the battery has a protection circuit, but who dares to say that the protection circuit has not failed for a while?

2. Recharge when the power is used up, which is not right, the power will reduce the ionic activity in the lithium battery, and the battery will be fully charged. My own mobile phone has always been charged with one less bar, and it was unplugged after automatic charging, and until now, there is no problem with two or three days after the battery is fully charged!!

The Huawei Honor 6 mobile phone battery and the mobile phone battery used in mainstream mobile phones are currently lithium batteries, which can be charged using the following methods:

Charge according to standard times and procedures, even for the first three times.

When the phone battery is too low, you should try to start charging in time.

The activation of the lithium battery does not require a special method, and the lithium battery will be activated naturally during the normal use of the mobile phone.

There are many theories about the first charge of the phone, and there is a saying that the first three charges must take more than 12 hours in order to activate the battery. This statement is misleading and wrong to do by the previous battery charging method. In general, the charging method introduced in the manual of the mobile phone is the standard charging method suitable for the mobile phone.

Buy it from Dibao, it's probably between 30 and 60. If you change to the original Huawei Honor 6 battery, then it will be at a price between 60 and 100! After-sales ** is generally one hundred yuan, personal advice or go to the after-sales exchange, first of all, the quality ***, the other, the after-sales replacement battery has a warranty.

Huawei Honor 6 original battery: 75 yuan.

The maintenance methods of mobile phone battery are:

If the newly bought mobile phone battery is lithium-ion, then the first 3 5 times of charging is generally called the adjustment period, which should be charged for more than 14 hours to ensure that the activity of lithium ion is fully activated.

In the use of lithium batteries, it should be noted that after a period of time, the battery will enter a dormant state, at which time the capacity is lower than the normal value, and the use time will be shortened;

The lithium battery should be fully charged (normal charging time) and discharged 1-2 times every 3-4 months or so;

The mobile phone battery should not be overcharged or used until it is empty, and it is advisable to charge within 2-3 hours, not necessarily full;

Before charging, the lithium battery does not need to be specially discharged, and improper discharge will damage the battery;

When charging, try to charge slowly and reduce the fast charging mode; Do not exceed 24 hours;

After three to five full charge-discharge cycles, the chemicals inside the battery are all "activated" for optimal use;

Please use the charger of the original factory or a reputable brand, and follow the instructions for lithium batteries, otherwise the battery will be damaged or even dangerous.

Is there a battery change near me?

The Huawei Honor 6 has a non-replaceable battery.

Huawei Honor 6 is a 4G smart phone built by Huawei, which was officially released at the National Sports Center on June 24, 2014. The Honor 6 is equipped with the Kirin 920 chip independently developed by Huawei HiSilicon. The chip is manufactured based on the 28nm process, using the 8-core GTS architecture (large and small core architecture) for the quad-core Cortex-A15+ quad-core Cortex-A7 processor, and the eight cores can be turned on at the same time.

In addition, Huawei also provides a one-year accidental damage warranty for Honor 6 users"Full body insurance", as long as 100 yuan, the warranty covers falling and breaking the screen, liquid splashing, environmental factors, hard object bumps, etc.

It is non-detachable by default.

If you want to replace the battery, you must return it to the factory.

It's okay, but the mate7 is larger, and it is generally charged once every two days when it is played moderately.

It depends on how you use it, just carry a power bank with you.