How to set the width of a CAD PL line

How to set the width of the PL line in CAD:

Tools required: computer, CAD software.

1. Open the CAD software, find the [Multi-line Segment] in the upper left corner, like a curve logo, and click [Multi-Line Segment].

2. After clicking [Multi-line Segment], click anywhere, specify the location of the starting point, and then enter the command in the [Command Line] below: w.

3. After entering w in [Command Line], press the Enter key, you can see that the [Command Line] displays: pline to specify the starting width, then enter :10 in [Command Line], and then press Enter.

<>5. After setting the width of the starting point and the end point, you can see that the PL line segment has a width.

So the friends of the relevant CAD design are all understanding, in the CAD drawing, PI is a polyline command, so if we need to modify the width, we can adjust it in the settings.

First, open a new blank CAD drawing file in your CAD and click on the Enter Polyline Pi command from the command line below. Draw a polyline.

Then the drawing is completed, the stand-alone mouse left click the curve command, and finally click the line width attribute in the settings column above, and then click the line width that needs to be modified in the drop-down menu.

1. Enter the command"pl"2. Select the starting point and enter the command"h"3. Enter the half-width of the starting line, such as 10, and then enter the half-width of the endpoint after the space is determined, such as or"10", and then the PL line widens. 4. If the starting point input is 0, and then the end input is 10, it will form a triangle, one end is narrow, and the other end is wide. 5. When using commands, enter the corresponding commands according to the following command line prompts.

Enter the command: pl enter.

Point to the starting point: Select a starting point location.

Enter the command: w Enter.

Enter the starting width: If you enter 10

Enter the width of the end point: 1) The two ends of the line are the same size Enter 102) The two ends of the line are not the same size Enter other values such as 20 and enter the last carriage return.

Select the PL line, right-click the mouse, and set it in the object properties.

The following describes how to set the line width of the PL command in CAD

1. Open the CAD software and enter the interface of the operation belt.

2. In the tool area of the CAD software, find the direct and quiet line command.

4. The line width after setting is not displayed with stupid luck.

5. Set the option to find and show the hidden line width, and check the option of closing the state.

6. Turn on the Show Hide Line Width option to set the line weight.

Brand model: Dell Lingyue 14-4000

System: Windows 10

Software version: CAD**Steps:1. Open the CAD software and enter the CAD software operation interface.

2. In the tool area of CAD software, find the Fanbi straight line command.

<>4. The line width after setting is not displayed.

5. Set the option to find and show the hidden line width, and check the option of closing the state.

6. Lao Min opens the Show Hide Line Width option to set the line weight.

1. Open the Auto CAD software and enter the main page of the software.

2. Click "Start Drawing" to enter the drawing operation page and click the circle icon.

3. Click the cursor in the cherry blossom field in the drawing area to establish the center of the circle, and then move the mouse to change the radius of the circle.

4. Click the mouse in the drawing area, and then enter the radius of the circle in the command area to establish a circle.