12306 face authentication always fails, how to solve it

12306 Face Authentication Always Fails Workaround:

1. In case of authentication failure, go to the railway station or ticket office for re-verification according to the system prompts. However, this kind of problem cannot be solved by general ticket offices, so it is recommended to consult directly at the information desk at the train station.

2. Be sure to bring your original resident ID card before going to the consultation, and then operate according to the instructions of the staff.

3. Open the official website of 12306 and re-register a user.

History

12306**。

It was opened on January 30, 2010 (the first day of the Spring Festival in 2010) and carried out trial operation. Users can query train schedules, fares, remaining tickets, sales points, delays and other information in the **. Ticketing system at 23:00 Beijing time every day

From 00 to 6:00 the next day, the maintenance will be entered and no service will be provided during the period.

On January 19, 2011 (the first day of the 2011 Spring Festival), 18 railway bureaus of the People's Republic of China.

The company) has also set up a railway customer service center in the locality, and announced the service**.

2011-06-12, Beijing-Tianjin Intercity Railway.

Take the lead in testing the waters of online ticketing.

September 30, 2011, all EMUs.

Online booking is implemented for the route.

On November 20, 2011, all the Z prefixes went directly to the express train.

Tickets can be booked online.

The failure of 12306 face authentication is because the comparison with the original ** is not clear enough, and face authentication cannot be used temporarily, and users can use other verification methods or try face authentication again after a short time.

12306 Railway Official Ticket Purchase**, if there is a failure to brush your face, please try it at an angle with light, maybe the network is not good or the light is dark, there should be a prompt operation.

First of all, check whether there is a problem with the network, and secondly, see how the light is during the recognition process, if it is too dark, it will not be recognized, and see if it is operated according to the instructions.

1.If you have a lighting problem, you can find a place with good lighting. 2.

Put your entire face inside the camera. 3.Enter the correct ID number and check again.

4.Follow the prompts to blink or open your mouth. 5.

See if it's a network issue.

Is there anything else you'd like to ask? If not, please give a like, thanks.

<>2. Next, you need to click on mine in the lower right corner after entering, as shown in the figure below.

3. Next, you need to click on the certificate verification in my 12306.

4. Check the agreement in the witness verification and click Start Verification.

5. Next, you need to put the face into the corresponding box according to the prompts.

6. After the face authentication is successful, the verification will be displayed successfully.

1.If you have a lighting problem, you can find a place with good lighting. 2.

Put your entire face inside the camera. 3.Enter the correct ID number and check again.

4.Follow the prompts to blink or open your mouth. 5.

See if it's a network issue.

Is there anything else you'd like to ask? If not, please give a like, thanks.

<>2. Next, you need to click on mine in the lower right corner after entering, as shown in the figure below.

3. Next, you need to click on the certificate verification in my 12306.

4. Check the agreement in the witness verification and click Start Verification.

5. Next, you need to put the face into the corresponding box according to the prompts.

6. After the face authentication is successful, the verification will be displayed successfully.

<><5. Then, click Agree, click to start verification, and then align the face to the camera interface, Huai and Zen pay attention to verify that the face is the same person as the person corresponding to 12306, as shown in the figure.

I have been face recognition failures, which are generally network or light problems, and retry as follows:

I have been face recognition failures, which are generally network or light problems, and retry as follows:

The reasons for the failure of the railway 12306 face verification 1001 can be manifold, and here are some of the possible reasons:

1.The facial recognition system cannot recognize the user's facial features, which may be due to the user's facial expressions or insufficient lighting, resulting in the facial recognition system not being able to correctly recognize the user's facial features, resulting in verification failure.

2.The user may not follow the requirements prompted by the system during the operation, such as failing to complete the verification within the specified time.

3.The user's network may be in poor condition, causing the facial recognition system to not work properly.

4.Other reasons, such as railway 12306 system failure, etc.

If the face verification fails, it is recommended that you go to the train station or ticket office for re-verification according to the system prompts. Before going to the consultation, be sure to bring your original resident ID card with you, and then follow the instructions of the staff. If the general ticket office cannot solve this kind of problem in a rough section, it is recommended to consult directly at the information desk of Huosohao Station.

In addition, if the user encounters other problems, he can also open the 12306 official website and re-register a user.

The user's facial features cannot be recognized. 12306 Face Verification Failure 1001 is because the face recognition system cannot recognize the user's facial features, which may be due to the user's facial expression or insufficient light, etc., and the face recognition system cannot correctly recognize the user's facial features, resulting in verification failure.