How to keep tropical fish and maintain a fish tank?

1) Fish tank: It is a place where tropical fish grow and move. Tanks for tropical fish must be rectangular glass tanks with slightly larger sizes.

2) Suction pipe: It is used to suck out the dirt on the bottom surface of the fish tank when changing the water, and is connected by a soft rubber pipe and a glass pipe. The length is based on the height of the fish tank. Generally, one meter two to one meter five is taken.

3) Thermometer: used to measure and adjust the water temperature of the fish tank.

4) Fishing nets: used to catch and transfer tropical fish.

5) Glass light barrel: Put the light bulb into the glass light barrel and sink it into the fish tank to heat up and illuminate. The mouth of the glass light barrel must be 100mm above the water surface to prevent fish from jumping in.

6) Electric heating pipe: used to increase the temperature in the fish tank in winter.

7) Air pump: expel carbon dioxide from the fish tank and increase the oxygen capacity in the water.

8) Filter: filter out the dirt in the fish tank, keep the water clean, and play the dual role of increasing oxygen and purifying the water quality.

9) Thermostat: It is used to automatically control the temperature in the fish tank, which can keep the temperature constant for a long time.

10) Food hopper: Put fish food to float on the surface of the water, which is conducive to fish predation. It can also prevent fish food from falling into the bottom of the water and burrowing into the aquatic weeds, making the aquatic weeds and sand turn black and corrupting the water quality.

11) Dirt remover: made of plastic plate. It is used to scrape dust and oil from the water surface of the fish tank.

Change the water frequently, disinfect frequently, feed the fish a small amount many times, remember that the water temperature should not be too high, in case of a power outage, the fish in the water with a high water temperature are easy to die!

Change the water frequently, feed the fish a small amount, the water temperature should not be too high, if there is a power outage, the fish in the water with a high water temperature are easy to die!

You can buy a thermostatic control heater, set the temperature and it can run automatically, when the temperature drops, the bimetal sheet in the heater is denatured, and the heating wire is turned on, which is quite reliable. It is worth noting that the heater can completely invade the water, especially the heating part must be guaranteed to be soaked in water, and most heaters are damaged by dry burning.

Or buy the heating wire in the family electric mattress in the electronic market, the length is about 10 meters, the power is about 150 watts, although the power is not large, but it is heated evenly all over the bottom of the cylinder, which can basically meet the needs. It is insulating and waterproof, and can be fixed directly to the bottom of the cylinder with suction cups, and the two ends of the heating wire are connected to the temperature control part of the heating rod.

1. According to the size of the fish:

If you are raising large fish in a large aquarium, you must fix the heating rod well, because the power of large fish is very large, and it is easy to make the heating rod touch the wall of the fish tank and break it, so we recommend that in addition to fixing the heating rod, it is best to choose a metal heating rod in addition to fixing the heating rod. The heating rod should avoid direct contact with the glass as much as possible and should not be buried in the bottom sand. Because these practices will lead to uneven heating of the fish tank glass, it is easy to break the tank block.

2. According to the heat dissipation effect:

In the aquarium, the heating rod is placed obliquely or flat near the bottom of the cylinder, so that the heat dissipation effect is better, because the water will rise after heating, and the temperature difference between the hot water generated by the lower part of the rod and the upper part of the rod is relatively small, and the heat conduction will be slower, which undoubtedly reduces the heating efficiency, prolongs the heating time, and wastes energy. And the temperature control device is at the upper end of the heating rod, which will cause the heating rod to stop heating early. However, it really doesn't look good in this way, so many people are still willing to use the heating rod vertically.

At this time, it is necessary to cooperate with a thermometer to adjust the water temperature. The thermometer should be placed away from the heating rod to ensure that the water temperature obtained is not from the hot water that has just been heated.

I've used some insulation in the past, and I usually put it next to the boiler to ensure the temperature. It is also more convenient, I generally control the temperature at about 25, and the minimum should not be lower than 20, because this is the temperature that the fish can accept, and it is better for its growth environment. We should also note that under normal circumstances, especially in winter, the temperature difference at night may be a little larger.

However, it is also necessary to pay attention to the water temperature that balances the temperature change in our fish farming environment as much as possible. Try to maintain a balanced state, the temperature can not be too high, not too low, so the home should be properly prepared some heating tools, now there are special can set the temperature will be carried out automatically, inside itself has a constant temperature control. This is a very good choice for you, and it is easy to have a good protection of aquatic plants, which reduces a lot of difficulties for the whole fish farming, if you are a novice You can try it, if you have some experience, then you know how to use, I hope to be able to help you, this is my previous small experience in fish farming.

First, use a double-glazed cylinder.

The insulation effect of double-glazed cylinder is good.

The location of the fish tank should be free of convective wind, that is, the position of relative shelter from the wind, and the position where the sunlight can be received, the use of sunlight can be appropriately warmed, and the shelter from the wind can reduce heat loss.

The main thing is to use a heating rod to ensure that the water temperature is constant.

How to keep a tropical fish tank at a constant temperature? It is to use a heating rod to ensure that the water temperature is constant.

Tropical fish mainly pay attention to water quality, water temperature, a good circulation system is the key to ensure water quality, so pay attention to the following:

1. Change the water once a week, don't change the water too often;

2. It is recommended to infiltrate some aquatic plants in the base tank of the fish bush;

3. Adjust the water temperature to between 24 and 28 degrees;

4. Sprinkle some salt every time you change the water to prevent diseases;

5. Keep the fish in a semi-starved state, so that the fish will be more active;

6. If you use tap water when changing the water, expose the water to the sun for three days;

7. Proper sunbathing;

8. The water temperature should be constant.

Fish tank breeding tropical fish need to be equipped with heating rods, filters and oxygen pumps, when raising need to pay attention to water temperature, water quality and acidity and alkali softness and hardness, it is best to control the water temperature between 22 and 26 degrees, maintain clean water quality, and change the water regularly. At the same time, it is necessary to pay attention to cleaning the fish tank and filter regularly to prevent the growth of bacteria.

Tropical fish do not have very high requirements for water quality, they only need to control the water temperature, acidity, alkalinity, softness and hardness, and then maintain clean water quality. Therefore, keeping tropical fish in a fish tank requires a heating rod, a filter, and an oxygen pump.

When raising tropical fish, it is necessary to control the temperature between 22 and 26 degrees, and at the same time, it is necessary to pay attention to the feeding density and feeding amount to avoid rapid deterioration of water quality. In the process of tropical fishing, once the water quality is found to be turbid, it is necessary to change the water in time.

However, if there is sufficient oxygen and the water quality is good, the water change time can be appropriately extended. Secondly, it is necessary to pay attention to the regular cleaning of the fish tank and filter to avoid the breeding of bacteria and cause tropical fish to be infected with diseases.

1. Use a sand washer to clean up the impurities at the bottom of the fish tank;

2. Control the density of fish and appropriately reduce the number of stool fish;

3. Reduce the amount of bait;

4. Change the water frequently, but the amount of water should not be too much at one time;

5. Clean up the dirt attached to the wall of the bucket key cylinder in time;

6. Strengthen the filtration system of the fish tank to make it more efficient;

7. If conditions permit, aquatic plants can be planted densely in the tank, and a large number of aquatic plants can be combined with the filtration system of jujube pins to maintain stable water quality.

Tropical fish in the tank need to use water suitable for fish growth, and deionized water or RO water is usually used for leakage judgment, which is cleaner and can maintain more stable pH and hardness, and will not affect the growth and development of tropical fish. In addition, because tropical fish have high water quality requirements, the water quality in the tank should be tested frequently to ensure that the water quality meets the requirements of tropical fish.

In the process of curing, the following points need to be noted:

1.Water temperature: Tropical fish need a constant temperature water environment to survive, and the water temperature is generally between 24 -28, so you need to use a thermostat to control the water temperature and check the water thermometer regularly.

2.Water quality: Tropical fish have high requirements for water quality, so they need to change the water regularly, keep the water clean and hygienic, and also choose to use water quality adjustment tools such as water filters and aeration pumps.

3.Feeding: There are many kinds of feed for tropical fish, and you can choose not to return to the same kind of sock feed according to the preferences of the fish, but it is necessary to keep the appropriate amount and timely, and do not overfeed.

4.Diseases: Tropical fish are prone to some diseases, such as bacterial infections, fungal diseases, etc., and need to strengthen observation, find problems in time and take corresponding measures.

In short, raising tropical fish requires always paying attention to the water quality, temperature, feed, diseases and other conditions of the fish tank, and constantly exploring and researching in order to make tropical fish grow healthily and bring more fun to family life.