How to use a smoke helmet, and what to do if the helmet has fog

As I said, adjust the smoke protection helmet is the best, set the desktop - right mouse button properties - settings - color quality to the highest (32-bit) to medium (16-bit), and then adjust the brightness slightly in the game. Before the smoke helmet is debugged, the enemy can be faintly seen in the smoke, and the smoke in the distance can not see people, after debugging, the enemy can be clearly seen in the smoke, and the smoke in the distance can faintly see the enemy, it is recommended that you try it!

There is also a situation where some players feel that they still can't see green smoke and red smoke clearly, that's because these two kinds of smoke are aimed at and restrain smoke protection helmets, if smoke protection helmets are really so versatile, then many smoke tactics in CF games can not be implemented, competitive games need to pay attention to a balance, I hope the landlord can understand, the game is happy.

A simple way to adjust the smoke helmet (start on the computer desktop, find the nvidia control panel after the control panel, adjust the ** color at the end of the point, then click through the nvidia setting, and then start to adjust, the brightness is adjusted to 78%, and the contrast ratio is 55%.

Hue 11 saturation 35,Click to apply after finishing,Exit after applying,Come to the desktop,Right click,Properties,Settings,Color quality changed to 16,Apply OK after finishing,OK,Enter the game and enter the game to point settings,16k,Change to 32kEnter the game and throw a cigarette to try,)

First adjust the screen resolution to: [1024 768], adjust it in the [Settings] of the desktop [Display Properties], then adjust the [Color Quality] from [32-bit] to [16-bit], and then click on the [Advanced] option: [Monitor] is [60 Hz], adjust it to Hertz, then log in to CF, click [Settings] after entering the game, point the picture quality to [16-bit], and then go in and throw a smoke, you stand in the smoke OK, the higher the brightness of the computer screen, the higher the visibility in the smoke, The CF hotkey to adjust the brightness is:

pageup, but all the premise is that you have to buy a smoke helmet, otherwise: the gods and horses are all floating clouds!

Hello. Log in to the game interface first.

Don't go in. 1.The first is a piece of desktop settings: resolution 600 800, color quality 16

Point Advanced, Monitor, 75 Hz 2

into the game. Then there is the game setting: brightness 70-80, you can also try 100, and you know that the other settings are basically spikes. Colored smoke will have to wait a little longer to be seen. If it works. Hope.

Just use it directly, in the personal warehouse, click on the character, head, and click on the smoke head props.

In the equipment slot, Character - Head - Click on the smoke transparency that appears on the right side of the smoke helmet, and drag the bar to the transparency you like.

XP system: Desktop - right-click - select "Properties" - select "Settings" - 800*600 pixels - select "Color Quality" - select 16 median colors - Advanced - select "Monitor" - adjust "Hz" to 75.

Turn down the picture quality!

Enter the game, press F1, adjust the brightness to 75, OK.

In this way, the white smoke is basically ineffective, and the red and green smoke are half-visible.

Just put it on in my props, and when there is smoke in the game, you can show its effect!

Desktop right-click - Properties - Settings (resolution 800*600 in 16 bits).

Then go into the game and adjust the image quality to low.

The texture quality is low.

Cut out the game again.

Then right-click on the desktop - Properties - Settings - Advanced - Monitor (75 Hz) - geforcele - launch - find Adjust desktop color settings - find the digital vibration control - turn up to maximum - switch back to the game.

Brightness is set to 70 to 100

The individual is on a case-by-case basis.

Right mouse button, Settings, Color Settings, set to 16 bits, then Advanced, Monitor, set to 75 Hz. Then go to the game settings, it's still 16-bit, and the picture brightness. I'm personally 67, I feel 63-70 is the best, and if it's too bright, it's 、、、 dazzling

Click Start - Settings - Control Panel - nvidia

Brightness is set to %78

Contrast ratio %55

Hue % 11 Saturation % 35

Click Apply. Retreat to the desktop, right-click in the blank space, select Properties-Settings-Color Quality to Medium (16).

Are you sure. Entering the game will have a default screen of 16k inside

I chose 32kok.

Go into a room and throw a smoke at it.

Brightness is set to %78

Contrast ratio %55

Hue % 11 Saturation % 35

Click Apply. Retreat to the desktop.

Right-click on the blank space.

Select Properties - Settings - Color Quality to Medium (16).

Are you sure. Entering the game will have a default screen of 16k inside

I chose 32kok.

Go into a room and throw a smoke at it.

Look at it in "Characters"! When you see the Smoke Helmet, click on it, "This item is equipped, you can use it in-game".

That's it.

This one to be tuned, click Start Settings Not Settings Color Settings Set by nut First Tone 78 Second 65 Third 11 Fourth 36, Apply Properties Settings Change 32 to 16 Apply. OK!

After doing the upstairs, click Advanced, change the monitor frequency to 75hz, then change the resolution to 80 to 100, and change the image resolution to the far left. It's fine, ignore the smoke.

Face Right-click Properties Set the color in the 16-bit dot below the advanced monitor dot with the largest one at 75 Hz. Adjusted to 16-bit in the game. Brightness 75

Weather effect none. Wish.

If you need to adjust it, you can right-click on the desktop of the computer, click Settings, adjust the color quality to 16, and make sure that you can enter the game.

Hello, the characters who are currently in the line of fire.

and CF members and some props.

You can get it with a redemption code, and you can't get anything else right now. Q Hope needs to be generated.

Practice can m me.

Practice and pay well. Fund.

If you have any questions, I will reply to you as soon as possible!

Just bring it with you, you can see through the smoke.

Vaguely seeing the enemy, it is recommended to take a sniper after throwing smoke. Sniper lookout.

Put it on, jelly! If you have other questions to ask, we will try our best to answer them, satisfied, thank you.

Desktop right click - Properties - Settings - 800x600 pixels.

The color quality tonal (16-bit) point application can be done

Put it on in the "warehouse".

However, it is not possible to see the cigarette butt completely, but it is sufficient.

Have fun!

More use can be hungry. Artemisia stalk starvation method is old. A lot of series. The way you can do it.

With cigarette butts, turn up the brightness of the picture!!

You can buy a smoke helmet and equip it!!

You can use it when you transfer it.

For the time being, the smoke head cannot be adjusted, waiting for the update. Now the smoke head just dilutes the white smoke.

It's not a big deal, turn up the brightness to a hundred. It's easy to fight ghosts.

Use it in personal belongings.

Purchase anti-fog patches: Placing anti-fog patches on the inside of helmet lenses can make the patch area fog-free, easy to install, and suitable for all kinds of helmets. Wipe the inner surface of the helmet glass with thick soapy water or dishwashing water solution, and let it air dry before wearing.

The effect lasts for about a week. Choose an anti-fog helmet: According to your own economic conditions, choosing a suitable anti-fog helmet is the best solution for helmet fogging, once and for all.

Purchase anti-fog patches: Placing anti-fog patches on the inside of helmet lenses can make the patch area fog-free, easy to install, and suitable for all kinds of helmets.

Wipe the inner surface of the helmet glass with thick soapy water or dishwashing water solution, and let it air dry to wear it. The effect lasts for about a week.

Choose an anti-fog helmet: According to your own economic conditions, choosing a suitable anti-fog helmet is the best solution for helmet fogging, once and for all.

There are also recommendations for opening a small slit, but I don't recommend it, because it hurts to blow your face when you open a slit in winter.

Helmets can be fogged by applying soap, dish soap or professional anti-fogging agent to the transparent front panel of the helmet. When handling, first clean the helmet and dry it with a paper towel, then apply soap, dish soap or spray to the transparent front panel of the helmet, and let it air dry.

1. Soapy water treatment

Helmet haze fogging can be treated with soapy water with a high concentration. Before processing, first clean the bezel lens of the helmet to prevent stains from affecting vision, and then wipe the inside of the lens with thick soapy water, let it sit for a while, and wait for it to dry naturally to prevent fogging.

2. Dish soap treatment

Helmet haze can be treated with dish soap. The adhesion of dish soap is strong, and a protective layer can be formed on the transparent front plate of the helmet, and the dish soap is evenly applied to the inner surface of the helmet lens during processing, and then rinsed with water, pay attention not to wipe it with your hands, so as not to destroy the formed dish soap coating, and let it air dry or blow dry after rinsing.

3. Anti-fogging agent treatment

Anti-fogging agents are reagents specifically designed to prevent helmets from fogging and can be used to avoid helmets from fogging. Between the use of anti-fog spray, first shake it well, and then spray an appropriate amount on the inner surface of the helmet lens, pay attention to the anti-fog spray after spraying, no more water to wipe the surface, so as not to damage the anti-fog effect.