-
Water pipes and wires can go to the ground at the same time. Many of us who have bought our own houses choose to invite some decoration companies to decorate, so after they finish the decoration, we have to carry out water and electricity acceptance, so when they install water and electricity,Water pipes and wires can be used at the same time, but if the decoration is not good, it will cause great trouble in the future.
If you choose to go to the ground at the same time as the water pipe, then there will be problems such as water seepage or leakage after the water pipe is renovated, and if the wire is not done well, it is particularly easy to cause some circuit obstacles. Especially from the perspective of maintenance, if the water pipe leaks, and the water pipe goes to the ground, then the floor or ground has to be demolished, the time, manpower, material and financial resources are very large, not very suitable, and will also bring great trouble to the residents downstairs, and the gains outweigh the losses. <>
Therefore, it is recommended that water pipes and wires do not go to the ground at the same timeYou can let the wires go to the ground, the water pipes go to the top, and the two are separated, so that the water pipes will not threaten the wires if they leak in the future, and it is also very convenient and fast from the perspective of maintenance, and it will not leak to the residents downstairs, which also saves a lot of trouble. Moreover, the water pipes and wires are treated separately, and the safety has also been greatly improved.
In short, water pipes and wires can go to the ground at the same timeHowever, I suggest that you should keep the water pipes and wires separateOne goes to the ground and the other goes to the top, which also avoids a lot of potential safety hazards, and it will not cause great trouble.
-
Yes, yes, the first thing to note isWater pipes and electric pipes should not be placed snugly in the same tank, because there will be water vapor in the water pipes, and electricity needs to be in a dry environment. It's not that it can't be side-by-sideHowever, it is necessary to pay attention to the height and distance of the line, so that the water and electricity pipelines have a scientific spacing, meet the requirements of the code, and control the distance. At the same time on water, electricityConstruction sequenceHave a reasonable arrangement
The best way is to go to the ground with electricity and water to goceilingsIt's safer for two to walk separately than together. If the water goes to the ceiling, the waterproof effect of the general ceiling, the ground waterproofing will not be done so carefully, so once the water pipe leaks, you will definitely be able to detect it for the first time, and if you go to the ceiling, even if the water leaks, it will not develop to the point where the water penetrates the floor slab to the neighbor's house. But first of all, we must know that whether it is a wire or a water pipe, it must be unobstructed, so we need to design the line direction first, and then slotted according to the designed route, preferably all straight line slotting.
In this way, the smooth flow of the line can be ensured. So the first thing we should pay attention to is to choose straight line grooving.
To go to the top or to go to the ground is to be chosen according to the actual situation, in short,Whether the waterway goes to the top or the ground, it must meet the standards of GB50242-2002 of the "Code for Quality Acceptance of Building Water Supply and Drainage and Heating Engineering".Under the premise of excellent construction quality, the master suggested that it is better to choose to go to the ground, of course, you also need to make a choice according to your own situation.
-
Do the math how much it will cost you to renovate your home
It is possible to walk on the ground at the same time, but for the sake of convenience and safety, it is recommended not to walk on the ground at the same time, and it is better to separate the water and electricity as much as possible.
1. From a security point of view.
If the water pipe is on the ground, it is difficult to detect problems such as water leakage, and even if it is found in time, it will be more troublesome to repair later. If the wire goes to the ground, the construction is more troublesome, and after a long time, it is easy to cause problems such as circuit failure.
2. From the perspective of maintenance.
Hydropower at the same time, need to dismantle the ground, and then buried in the cement, when the time comes, whether it is a water pipe or wire failure, need to be removed together, maintenance is very troublesome, but also increase the cost of maintenance, so it is not recommended that everyone water and electricity go to the ground at the same time.
3. From the perspective of avoiding disputes.
Water and electricity go to the ground at the same time, when there are problems such as water leakage, it will affect the neighbors downstairs, at this time, not only to repair and compensate, but also to affect the relationship between the downstairs neighbors, so in order to avoid these disputes, try not to go to the ground at the same time.
4. From a cost point of view.
Although it is more convenient to use water and electricity to walk on the ground at the same time, and it can also save materials, it needs to be grooved and backfilled, so that the whole thing adds up, and the cost may be more. Therefore, it is recommended that everyone do not walk the ground at the same time, you can walk separately, or it will be better to go to the top.
Enter the area and get the decoration for free**].
Enter the area and get the decoration for free**].
-
This is not allowed, because hydropower itself is incompatible, and there will naturally be safety hazards.
-
It's best not to, if there is a leakage and water, it will be troublesome
-
I don't think we can do it at the same time, because it's very risky.
-
I don't think so. After all, these are very dangerous two lines that need to be strictly demanded.
-
It is better not to be like that in the old donkey who is in safety, and there is the danger of electricity leakage.
-
I think it's better not to do it because it's easy to create a risk of leakage.
-
You need to find a special designer to help you design well, don't design by yourself.
-
I think this should be fine, but I don't think it's safe.
-
When renovating hydropower, should the wires go through the wall or the ground? At present, many of our homes have to renovate the original water and electricity. Here, we will focus on the conversion of circuits.
It is believed that the wires in the personal hydropower renovation are best walked by the wall. On the one hand, it is more convenient and economical to walk through the wall. Nowadays, most people will fix the switch and socket on the wall, and the laying of sockets and wires can be conveniently arranged to the greatest extent by passing through the wall and saving decoration costs.
Because the lights are turned on and off, they are all about meters above the ground. At this time, it is also from the distribution box along the wall to the ground, then to the ground, and finally to the light switch. The third case is the socket at the top of the wall.
At this time, when laying the conduit, it is generally on the wall first, and then on the roof; Finally, it goes down the top plate back to this socket. The way the circuits are laid out in the home. If we renovate the circuit at home, in fact, we must first rely on the above principle, the principle of arranging the conduit nearby.
That is, if the switch socket is close to the ground, go to the ground; Close to the roof, walk on the roof. But there is a special case of circuit modification, which is that if we don't have a suspended ceiling, the upper socket can't pass through the ceiling to arrange the conduits. At this time, the pipe can only be laid on the ground and then connected to the bottom box along the wall.
ConclusionWhen decorating water and electricity at home, whether the conduit is along the wall to the roof or along the ground to the wall depends on the actual situation of our home. But there is one principle that everyone should follow, and that is the principle of proximity.
There are three main types of switches and sockets in our home. In the first case, the sockets are arranged at a distance of about 30 cm from the ground. In the second case, the switch of the light is arranged at a distance of about 13 cm from the ground.
In the third case, the sockets are arranged at a distance of about 50 cm from the roof plate. When decorating water and electricity at home, whether the conduit is along the wall to the roof or along the ground to the wall depends on the actual situation of our home. But there is one principle that everyone should follow, and that is the principle of proximity.
-
I think the wires should go to the wall, because the pipeline goes to the wall, and the materials are less, which can save the decoration cost.
-
It should be determined according to the specific situation, most of them choose to go to the ground, and some northern cities will choose to go to the wall.
-
If you choose to go to the ground, it will be easier to repair the wiring in the future.
-
In hydropower renovation, is it better to walk the wire through the wall or the ground?
1.Good to walk the wall. Walls are more convenient and economical.
Nowadays, most people will fix the switches and sockets on the wall, which can facilitate the laying of sockets and wires to the greatest extent and save decoration costs. On the other hand, since there are other pipes such as underfloor heating on the ground, once the power lines are on the ground, the fault is difficult to deal with, and the entire ground needs to be destroyed. Plus, it's safer to walk on the wall with wires.
After all, there are water pipes and heating pipes on the ground. If there is a water leak, the consequences can be severe. When we renovated the house, we modified the circuitry.
In fact, we must rely on the principle of proximity to the catheter. It is better to walk through a wire wall, which is convenient and saves money. The switch should be in the same horizontal position, and the socket should be in the same position.
Except for special circumstances, safety must be paid attention to in the process of hydropower transformation.
2.The ground wiring water and electricity is more convenient, the overall effect is very simple, and the construction of workers is safer. When decorating wall hangers, you don't need to consider line safety.
Compared with the ceiling wiring, it can save space height, avoid large-area ceilings, and save decoration costs. When we decorate, we should choose according to the actual situation of our house. Before the hydropower transformation, let the designer design the hydropower layout in advance, and then let the construction master carry out the construction according to the drawings.
3.There is a principle of hydropower transformation, that is, walking on the top and not on the ground. Of course, our ceilings do not go through the floor, walls and other spaces.
This is also a problem related to the maintenance cost at a later stage. It's easier to check the ceiling, but the floor is not the same as the wall. It takes a lot of work and effort, and the reason may not be found.
Walking on the roof does not mean slotting in the roof, but walking along the corner between the wall and the roof. The advantage is that it is convenient for later maintenance and replacement, and the maintenance will not penetrate downstairs when there is a problem. Waste water pipes on the rooftops.
Generally, you have to make a suspended ceiling to hide the water pipes to ensure the beauty, so the cost will increase a lot. Traditional wiring needs to be grooved underground, and most owners require wiring to be horizontal and vertical, which is actually incorrect.
-
Personally, I think that it is better to bury the wire in the ground, of course, it is better to choose to bury it in the wall, because this can test the master's craftsmanship, and it is also safer in the installation process.
-
Good to walk the wall. It is easy to trip pedestrians when walking on the ground, and it is not safe. Walking through the wall may require longer wires, but it is safe.
-
Walking better, it looks like the inside of the house will be very clean, and it will be very beautiful, but it will make the house look messy.
-
When the water and electricity is renovated, it is better to go to the ground, and you only need to open the floor when repairing, and if you go to the wall, the whole wall needs to be redone.
-
Answer: Formal water and electricity decoration to go to the wall or the ground should be determined according to the conditions, generally go to the ground to facilitate construction; If the ground (underground) situation is complicated, go to the wall or roof. 1. If you are installing all-solid wood flooring, laminate flooring, or solid wood glued flooring...In addition, for the family with water pipes underground, once the water pipe leaks, once the water pipe leaks, it will increase the risk of potential safety hazards and leakage. The electricity can effectively separate water and electricity, even if the water pipe leaks, it will not affect the power lines in the sky, so it is safer.
2. All wires and water pipes go to the ground, and every switch, socket and water point is slotted from the ground to the wall. This way of walking is less damaging to the wall, but there are more ground pipelines, you need to be extra careful during construction, to avoid bumping the water pipes on the ground When it comes to the water and electricity transformation at home, there are many people who will insist on going to the top of the water and electricity, because the water and electricity are changed to the top, for good maintenance in the future, in case there is a problem in the future, we do not need to smash the wall, and the maintenance cost is also low. 3. The layout of water and electricity is the most conventional and the earliest practice.
Everyone should have seen the houses made by the developers, and their waterways and electrical circuits are all arranged on the ground and walls of the building. Their layout of the water circuit is based on the design of the design institute once there is a problem can be detected in time, such as the water leakage is at most drip in their own space, and the water pipes are generally distributed in the kitchen and bathroom space, all do ceilings, maintenance is more convenient! Cons:
Aerial work has high technical requirements for the master, and the cost of materials and labor will be more than that of walking on the ground.
-
I recommend that the hydropower renovation is still the wall, because if the hydropower line is buried in the wall, it can be very convenient for later maintenance and early decoration, and the ** is relatively low.
-
I think it's better to walk through the wall when renovating water and electricity, because there is floor heating in the ground, so it won't affect each other.
-
There are two benefits to doing so. First, it can be convenient to operate when there is a fault in the future, and second, it can effectively prevent electric shock accidents and be grounding safe.
-
In fact, both ways are possible, but nowadays people are walking on the wall, and there are more commercial buildings on the ground.
-
Walk the wall. Because this will be very convenient in the later maintenance, it will not knock off the floor tiles, and it will not make our losses greater.
-
Home hydropower renovation, water pipes go to the top or go to the ground? Listen to the insider's analysis, and regret pretending to be wrong.
1.Circuit modification: square single-strand copper core wire for lighting. >>>More
Hello, it is home decoration, bathroom and stove room, hot and cold water, generally with 20 Weixing ppr pipes, heating with 25 ppr hot water pipes.
Electric welding, with electrical energy as the general term for the type of energy welding, the energy situation includes: arc welding, resistance welding, induction welding, energy beam several types. >>>More
The purchase of wires is generally considered from the following points: >>>More
First of all, we must pay attention to whether he has a detailed line design, and pay attention to the lines that are pulled when accepting hydropower.