Problems with SAI software and the pen

I've also encountered your situation, the first day to use it or good, but the next time I use it there is no pressure, so I restarted the machine, reinstalled the driver, and the software was reinstalled in the same way, so I was desperate, and then I went to the official customer service, he told me that the pressure pen was broken, and then he told me to try again, set the driver to reinstall the software, strange pressure pen pressure again, I fainted, if I didn't try again, I would take it back to the company to repair, It's not very far but it's quite troublesome, mine is a board from wacom. If the landlord has PS installed, you might as well open it to try.,There may be a problem with the software.,Or uninstall the sai and reinstall it.。 Remember to uninstall all its data, it can't be deleted in the program deletion, you have to find his folder and delete it together.

I hope it can help you.

That is, SAI is not compatible with the key program on your pen. It doesn't matter if it's not a big deal. Compatible with keyboards.

If you can't learn to use PT, after all, although SAI is simple, if PT is familiar, it is still much more convenient than SAI.

ps,It is recommended to draft a large effect on sai.,You can switch to pt or ps.

Reinstall the drive and then restart.

The solution is as follows:

1. First of all, open the sai, draw a few straight lines with a pen, and find that these straight lines are the same thickness, but there is no pressure, and the lines that come out are not beautiful, as shown in the figure below, and then enter the next step.

2. Secondly, look at the size of the smallest diameter in the sai. If it is 100, there must be no pressure. Adjust it to 0 to solve the problem as shown in the image below, and then move on to the next step.

3. Then, if there is no response, check Other-Options-Tablet, and adjust the minimum pen pressure value to 0, as shown in the figure below, and then proceed to the next step.

4. Then, if there is no pen pressure on the SAI, but there is a pen pressure on PS or other software, it means that there is an error in the SAI software. At this time, please uninstall SAI and reinstall it, as shown in the following figure, and then go to the next step.

5. Subsequently, check your own control panel-wacom pen tablet properties. If the "WACOM driver not found" attribute appears, it indicates that there is a problem with the driver. At this point, please uninstall the initially installed driver first, and then you can uninstall the program in the Control Panel as shown in the image below, and then proceed to the next step.

6. Finally, if there is still no response, please open the task manager and find " under Services".

Wacom Professional Service" process, if the status is disabled, right-click to start it, as shown in the following image. In this way, the problem is solved.

Click the Pencil tool.

There is a minimum diameter at the bottom of the tool list.

Just adjust the minimum diameter from 100% to less than 50%.

Under the blank tool in SAI, right-click and create a new lead test.

Just set the minimum diameter of the pencil tool to 0%.

Are you the smallest point of the pencil to 100%?

Reasons and solutions for no pen pressure in SAI:

1. Look at whether the driver is the latest version, many drivers are relatively old and do not recognize SAI;

2. If there is a hand-drawn tablet, it should be that the refill of the pen head is too poked into it or the sensitivity of the pen head and one of the boards is not adjusted well, you can go to the setting panel of the board to adjust;

3. Restart the SAI, or turn it off, unplug the board, and then plug the board to open the SAI to see;

4. If it doesn't work, you should repair it, or there is no board, so the mouse will not be able to sense the change of power, and naturally there is no pen pressure, which is the reason for buying a board.

SAI is an acronym for Easy Paint Tool SAI, a drawing software that has been successfully commercialized, developed by SysTeamax [1]. On February 25, 2008, the official version of Easy Paint Tool SAI was released.

At present, SAI is still being updated, and the new version is still being developed and debugged.

Prior to the official release, SAI was released as a free software trial. Unlike other similar software, SAI provides a platform for many digital illustrators and CG enthusiasts to create easily. SAI is very user-friendly, and its pursuit is excellent compatibility with the tablet, the aesthetics of drawing, the ease of operation and the ability to provide users with an easy drawing platform.

Hello, try to uninstall the driver completely, and then reinstall the tablet driver.

The board has a pressure sensitivity in the PS, which means that the driver has been installed successfully and can be used normally.

In this case, one could be a problem with the software, and the other could be a problem with some aspect of the settings.

After you open the pen pressure setting of the pen tablet, you can't even move the mouse in SAI? I've never encountered this situation.

Try turning off [Tablet Support] in the settings of the tablet. The official pen tablet instruction manual has a hint that if you open this, it may cause some problems.

There is also the setting of the sai, in the sai go to the other - option, and then switch to the tablet panel to see if it is caused by the settings of the sai.

Another is about the setting of the brush, if the minimum diameter is set to 100%, there is no pressure sensitivity, and if the brush does not have the [Pen Pressure Control] option turned on, then there is no pressure sensitivity.

Then there is the problem of the software itself. If it doesn't work,You try my sai to see if it works.,This exe installation package can be used directly right-click to unzip it.。 Take a look.

You try the above method first and check if it is the best problem.

If necessary, you can consult the relevant customer service staff of Youji or send a private message to Weibo to describe the problem. They'll help you out.