Why is the SAI brush no longer pressurized?

If you want to learn systematically, you can consider signing up for a live online class, and recommend CGWANG's online class. The teacher speaks carefully, you can watch it back after the class, and there are also the same type of recorded classes that you can learn for free (give away lifelong VIP).

zdhhr-11y17r-97652317

Among the training institutions in the field of "comic design", [Wang's Education] is the leader in China, and it does not join the branches, but is a chain campus directly operated by the headquarters. Different from many other large institutions of the same type: each campus of Wang's Education is physically face-to-face, the teachers are hand-in-hand, and there are special class teachers from morning to night, and the liver-bursting learning mode will improve quickly, especially suitable for students with poor foundation.

Take a look at the pen tablet reload driver

The solution is as follows:

1. First of all, open the sai, draw a few straight lines with a pen, and find that these straight lines are the same thickness, but there is no pressure, and the lines that come out are not beautiful, as shown in the figure below, and then enter the next step.

2. Secondly, look at the size of the smallest diameter in the sai. If it is 100, there must be no pressure. Adjust it to 0 to solve the problem as shown in the image below, and then move on to the next step.

3. Then, if there is no response, check Other-Options-Tablet, and adjust the minimum pen pressure value to 0, as shown in the figure below, and then proceed to the next step.

4. Then, if there is no pen pressure on the SAI, but there is a pen pressure on PS or other software, it means that there is an error in the SAI software. At this time, please uninstall SAI and reinstall it, as shown in the following figure, and then go to the next step.

5. Subsequently, check your own control panel-wacom pen tablet properties. If the "WACOM driver not found" attribute appears, it indicates that there is a problem with the driver. At this point, please uninstall the initially installed driver first, and then you can uninstall the program in the Control Panel as shown in the image below, and then proceed to the next step.

6. Finally, if there is still no response, please open the task manager and find " under Services".

Wacom Professional Service" process, if the status is disabled, right-click to start it, as shown in the following image. In this way, the problem is solved.

Board drawing is a common way of drawing, but sometimes we find that the pen tablet has no pressure sensitivity, and the thickness of the drawing does not change, so how to solve this problem?

1. Open PS to enter the main interface of PS, and then check if PS has turned on the pressure mode, if not, open it.

2. Then open the window - Brushes - Shape Dynamics.

3. Check whether there is an exclamation mark in front, if it is normal, it is a tablet driver installation problem, if there is an exclamation mark, you need to modify the PS file to enable pressure sensitivity.

8. Then save it.

Extended Information: A pen is a digital pressure pen used for drawing, which is generally used with a pen tablet. At present, there are two types of active pressure pens that require a battery to be installed and passive pressure pens that rely on a pen tablet to provide wireless power, and the common nib pressure sensitivity level is 1024 and the highest is 8192.

First of all, what is the difference between pen pressure perception and pen pressure non-pen pressure perception? Let's compare. This is the same painting with and without pen pressure perception.

Don't you see a difference when you compare them? Illustrations without pen pressure perception are more consistent than those with pen pressure awareness. The thickness of the lines is constant. The tip of the line is rounded. In other words, without pen pressure perception, the lines tend to be even.

When you draw an illustration without pen pressure perception, that's why it looks "a bit flat". If the lines are the same, the whole illustration tends to become monotonous, and it is difficult to express the three-dimensionality. Tip 1:

Adjust the brush settings to make the lines clearThe first thing you have to do is adjust the settings of the brush you're using. If you draw a line without pen pressure perception, the tip of the line will be rounded. If you draw a line without the pen pressure perception, the tip of the line will be rounded, which will stop the flow of the line, and it is not suitable for expressing the three-dimensional effect of wrinkles on hair or clothes.

So, the first thing we need to do is adjust the brush settings so that the tip of the line is sharper. There are three different ways to adjust your brushes, so experiment and combine them to find the perfect line for you. (1) Turn on "Brush Pressure Size".

When you open the pressure, the tip of the thread (only the end part) becomes sharper.

How to change the amount of pressure.

2) After (1), make the "Min Width" smaller. If you turn on the brush pressure to make the minimum width of the brush smaller, the tip of the line (only the end part) will be sharper.

3) Turn on "Pressure Opaque". When you turn on Opacity, the tip of the line will become thinner and look gone. You don't have to turn on the pressure opacity, as it may not suit your design or taste.

4) Turn on "Pen Pressure Awareness" and "Force Entry and Exit". If you turn on both "Pressure Size" and "Force Input", the beginning and end of the line will automatically become thinner.

If this answer is helpful to you, you can end the consultation and please click on the evaluation of five little stars Thank you very much! If you have any questions, you can leave a message or consult again, and I will do my best to help you

Click the Pencil tool.

There is a minimum diameter at the bottom of the tool list.

Just adjust the minimum diameter from 100% to less than 50%.

Under the blank tool in SAI, right-click and create a new lead test.

Just set the minimum diameter of the pencil tool to 0%.

Are you the smallest point of the pencil to 100%?

Is there a color change? If it doesn't work, it should be a system bug, restart the software, and if it doesn't work, restart the next one.

There is no ink anymore Add ink hehe.

The SAI No Brush Tool is caused by a setting error, and the solution is as follows:

1. Find the folder where the brush is located.

2. Open the hard disk on which SAI is installed.

<>4. When deleting brushes, you can enter the folder to delete.

Reasons and solutions for no pen pressure in SAI:

1. Look at whether the driver is the latest version, many drivers are relatively old and do not recognize SAI;

2. If there is a hand-drawn tablet, it should be that the refill of the pen head is too poked into it or the sensitivity of the pen head and one of the boards is not adjusted well, you can go to the setting panel of the board to adjust;

3. Restart the SAI, or turn it off, unplug the board, and then plug the board to open the SAI to see;

4. If it doesn't work, you should repair it, or there is no board, so the mouse will not be able to sense the change of power, and naturally there is no pen pressure, which is the reason for buying a board.

SAI is an acronym for Easy Paint Tool SAI, a drawing software that has been successfully commercialized, developed by SysTeamax [1]. On February 25, 2008, the official version of Easy Paint Tool SAI was released.

At present, SAI is still being updated, and the new version is still being developed and debugged.

Prior to the official release, SAI was released as a free software trial. Unlike other similar software, SAI provides a platform for many digital illustrators and CG enthusiasts to create easily. SAI is very user-friendly, and its pursuit is excellent compatibility with the tablet, the aesthetics of drawing, the ease of operation and the ability to provide users with an easy drawing platform.