How to judge the quality of the whole cabinet from the countertop? From where can it be seen?

Nowadays, it is popular to install integrated cabinets in the kitchen. An alias for an integrated cabinet is also known as an "integrated kitchen". It usually consists of appliances, gas appliances, cabinets, and kitchens, four in one, fully functional.

It is not only practical, but also can increase the beauty of the kitchen, so that the kitchen layout is reasonable and the design is staggered.

There are a variety of materials for cabinet countertops, how to judge the quality of cabinet countertops? This method can be used to distinguish whether artificial stone contains calcium powder by means of a dilute hydrochloric acid test. The counterfeiting rate of calcium powder is very low, but the price is not low.

Many bad businesses like to do that. In chemistry, calcium carbonate creates bubbles when it encounters an acidic substance. To determine if it's an inferior artificial stone, you can pour an acidic liquid on the table.

Combustion method. This method is related to the material of the sheet. A good artificial slate contains aluminum hydroxide, which can be flame retardant.

You can cut an artificial stone slab into 5 cm thick and light it with a lighter. If it is an acrylic artificial stone, it will automatically extinguish, while an artificial stone containing calcium powder will not self-extinguish. For the soy sauce test method, if it is a calcium powder artificial stone slab, the plate cannot be completely dense and non-porous due to the material.

Therefore, after pouring soy sauce for a long time, it will leave traces that cannot be erased. The acrylic artificial stone is dense and non-porous as a whole, and soy sauce cannot be penetrated. No matter how long it lasts, as long as you rinse it with clean water, there will be no marks on the surface.

Weighing method: In artificial stone, calcium powder is the heaviest and acrylic is the lightest. Therefore, the better the quality of an artificial stone table of the same size, the lighter it will be.

Calcium powder artificial stone is heavy and hard, but it can be easily broken.

In addition, through the design and craftsmanship, we can see the quality of the overall cabinet. In the design of high-quality cabinets, there will be a front edge on the table to keep out the water. The purpose of this design is to make the edges raised to avoid dripping.

At the bottom of the edge of the table, there will also be a sink with a groove-like distribution, somewhat like the eaves of an old tile roof. A reinforcing strap is usually added to the hanging cabinet at the top of the cabinet. The purpose of this design is to strengthen the bearing capacity of the cabinet and prevent deformation.

On the contrary, low-quality cabinets are careless in handling these details. We can distinguish the quality of the entire cabinet by these details.

Through the inspection of the cabinet, as well as the accessories of the cabinet to judge, understand the choice of material, pay attention to the requirements of judgment, so that you can judge the quality of the quality. It can be seen from the material, as well as the installation, or to understand the use of the countertop, these places can understand the countertop of the cabinet.

It can be judged according to the finish of the countertop material of the cabinet and its hardness; From his countertops, cabinet panels and door panels, the hardware fittings and structural fittings of the cabinets, as well as its craftsmanship and other details and appearance.

It is also important to observe the hardness, observe the wear resistance of the countertop, judge the condition of the countertop, and whether it is easy to clean.

Looking at the hardness, composition, color, flat surface and price of the cabinet, you can judge the quality of the countertop.

1. a countertop.

There are generally three types of countertops: quartz countertops, artificial stone countertops, and stainless steel countertops.

2. a cabinet board. Check the cabinet board, that is, check whether the cabinet board is particleboard, MDF or moisture-proof board from the incision section. If MDF is used, the quality is poorer.

3. a door panel. At present, there are many types of cabinet door panels on the market, such as fireproof board, egger board, paint board, etc., and there are different inspection standards for different decorative panels, here are three commonly used detection methods: for edge banding decorative panels, the edge banding interface should be checked, if the edge banding is not firm, the interface is "dog teeth" more, the quality is not good; For the veneer without edges, the overall flatness, gloss and color should be checked, if the surface is uneven, matte or the color is different, the quality of the cabinet door is poor.

In addition, the quality of the substrate used can also be seen from the hinge hole of the door panel, if the substrate is MDF, the quality is not good.

4. Hardware accessories. Identification of hardware accessories. The hardware accessories used in the cabinet are very important, and it is best to use stainless steel hardware accessories.

5. Structural accessories. Identification of structural fittings. The problem that needs to be paid attention to is: check whether the material of the connection is corroded, or whether the strength is enough. If you check the door hinges, you can open and close the door several times, and at the same time observe whether the screw hole position is hidden and in place.

6. Cabinet technology and details. Whether the dust corner, anti-collision strip, and footboard are complete.

7. Appearance. Whether the curves are smooth and textured.

1.Cabinet thickness.

How to judge the best of a cabinet, this must first be judged from the thickness of the cabinet.

Of course, the thicker the quality under the same material, the better, the thickness of the general cabinet is mainly 16mm and 18mm These two specifications of the board, their thickness is different, the cost is also different, and the service life of the thicker cabinet is much higher.

2.Cabinet materials.

The material of the cabinet is now generally divided into two kinds, one is wood, the other is the metal material that is stainless steel, between them are different types of cabinets, the basic preferences are different, consumers can choose according to the style and material characteristics of their houses.

3.Countertop material.

The focus of countertop cabinets is not only the most frequently used, but also the highest, to choose anti-fouling, anti-scalding, anti-corrosion, anti-scratch and other characteristics, like stainless steel may as well be scratched, so it is very good to use in the family, like natural stone, artificial stone, fireproof board are good.

The quality of the cabinet can be judged by the following points:

1. Look at the appearance texture, there is no undulating state of the door panel, the size of the gap is unified, the door panel opens and closes smoothly, there is no noise in and out of the drawer, and there is no color difference and no seam on the countertop;

2. To see if there is an explosion, open the cabinet door to see whether the adjustment holes of the shelves are neat, whether there is a burst around the situation, and the two sides of the notch of the high-quality cabinet machine are smooth and tidy, and there is no explosion;

3. Look at the side trimming part, whether the color of the side trimming part is consistent with the front, and whether there are any traces of oily rubbing in the edge banding part;

Look at the plate processing first, if the plate is unqualified or the equipment is not sophisticated, there will be a phenomenon of gnawing edges, and the glue will soon appear in use in the future. Look at the edge banding, the end face of the plate should be treated by edge banding. Professional manufacturers use special machinery for edge banding.

Generally, the manual edge banding treatment of small workshops is relatively rough. Check the drawers, doors and other activity hardware parts, the switch should be flexible, noiseless, and have anti-collision or self-closing functions. You can check whether the hardware accessories selected for the product are up to standard.

The cabinets designed and produced by professional manufacturers should be connected by mountain silk between the cabinets, and the overall firmness should be good. The bottom of the base cabinet is equipped with a horizontal adjustment foot, which can adjust the levelness of the cabinet body and has a waterproof function. An integral movable baseboard should be provided to facilitate cleaning of the bottom of the cabinet.

In addition, the door leaf is equipped with a damper to eliminate noise, and the drain plate under the basin cabinet, the front of the table with a storage ditch, and the hidden drain ditch will play a decisive role in the service life of the product.

Thank you for the trouble to adopt!

In addition to the quality of the materials used in the cabinets on the market, there are also great differences in the production process. As a "can't see through" cabinet products, how to identify the quality difference of the product in the process? Quite simply, look at three points:

Sizing, edge banding, punching. There is still a big gap between the manual operation of small workshops and the production of large-scale standardized equipment.

So choose products from big brands as much as possible.

1. Look at the appearance and texture:

The door panel must be free of ups and downs, the door gap must be uniform, and the size of the gap must be uniform. The door opens freely. Drawers in and out of the noise noise. There is no color difference in the color of the countertop, and there is no seam.

2. See if there is a burst edge:

Look at the door panel for bursting edges. Open the cabinet door to see if there is an adjustment hole in the shelf, the adjustment hole of the shelf is generally neat and uniform, and there is no burst around the hole. Regular manufacturers are equipped with professional slotting machines, both sides of the notch are smooth and tidy, and there is no explosion phenomenon.

3. Look at the side trimming part:

Whether the color of the side trimming part is consistent with the front, and whether there are traces of oily rubbing in the edge banding part, because the edge repaired by the inferior edge banding strip will close the fine holes if it is rubbed with oil.

4. Stands: Divided into a lot. It is better to use quartzite. Acrylic's is hard to tell.

Owner 114 decoration knowledge quiz platform!

How to distinguish the quality of the cabinet This is definitely a university question: the following will popularize the first one: not only to look at the plate, workmanship, but also many details that can really not be seen at a glance, need to be carefully identified.

Second: the details are in place, and it is more convenient and practical to use, such as whether the cabinet itself is waterproof and dustproof, whether it is sturdy, these are all factors that need to be considered.

Third: these problems do not have to worry about in the olo kitchen cabinet, after all, it is equipped with European high-quality hardware at the same time.

With people's lives, people pay more and more attention to home life. Even the choice of cabinet countertops will pay attention to its creativity, and choose their favorite countertops with the trend of the era of land stoves. So how to inspect the quality of cabinet countertops?

We must pay attention to the choice of cabinet countertops, do not blindly choose, the following is an introduction to how to test the quality of cabinet countertops.

1. How to check the quality of the cabinet countertop - the hardness of the stone.

The hardness of stone is related to your choice of material, and the hardness of different materials is also different. The hardness of the stone is large, the texture is hard, the scratch resistance is very outstanding, and the wear resistance is good. If the hardness of the stone is small, after a long time, the countertop will be easily eroded by water and moisture, and improper use will lead to degumming, deformation, substrate expansion and other consequences.

Second, how to check the quality of the cabinet countertop - the surface of the stone is smooth and clean.

The countertop stone of the cabinet should be smooth and clean, and there should be no roughness. Ensure that there are no pores on the surface, and oil stains and water stains are not easy to penetrate into it, and there can be no unevenness. This is the basic item of stone countertop acceptance.

3. How to inspect the quality of the countertop - the surface of the stone is smooth and there are no cracks in Zichang.

The stone countertop should be free of cracks, the closure should be smooth, the size of the basin and cabinet accessories should be reasonable, the faucet should be installed firmly, and the sewer pipe should not leak.

There are no obvious traces of cementation at the countertop junction, and the gluing must be very smooth. For the artificial marble splicing, after splicing, stand at two meters and not see the seam traces, it is qualified.

1. According to the finish of the countertop material, it is very important to judge the overall cabinet countertop material, for example, the most important thing to buy quartz stone is to look at the finish, because the smoothness makes the prudence represent whether it will absorb color. When buying, buy a marker pen on the quartz stone, see if you can wipe it off, wipe it off will not absorb color, don't buy it if you can't wipe it off, and there are inkjet codes behind the quartz stone produced by regular manufacturers, pay attention to the logo.

2. Judging the hardness according to the hardness can also be judged in terms of the wear resistance of the overall cabinet countertop, the simple way is to use a steel knife to scratch, and the key can not play a role in identification. Taking "white crystal" as an example, the steel knife cut through, leaving a white mark is a frank roll fake quartz stone, because the hardness of the plate is not as good as steel, the surface is cut by the steel knife, revealing the white inside.

The main three countertops are white steel, artificial stone (cultural stone), and marble (original stone).

The advantage of white steel is that it is durable and can be perfectly combined with the vegetable washing basin (argon arc welding), but the only disadvantage is that it is not wear-resistant, but the technology determines the quality of the edge, and there will be stamping marks on the curling edge.

The advantages of artificial stone are that there are no joints, multiple colors are selected, and it is beautiful and atmospheric, but the toughness is average, the brittleness is large, and it is easy to break. It also depends on the thickness and quality. Be sure to wax before use for anti-fouling treatment, because the manufacturing is only a film lining, and the gum will generally be stained and polluted.

The advantages of marble are strong hardness, high hydrophobicity, and resistance to pollution. Natural color, high gloss on the polished surface. However, it is not easy to see the dark wounds and veins, and it is brittle, easy to crack and brittle. It has been waxed, but it should be waxed before use due to cutting, and it also needs to be waxed frequently during use, and the effect is the best.

Countertop classification: quartz stone and artificial stone.

Quartz stone: relatively high hardness of artificial stone, high temperature resistance, not easy to shape, there are seams when splicing, easy to hide dirt and dirt. Once a crack appears, it cannot be repaired. Brand: Bitu (imported), Tianci (domestic), Blue Ocean (domestic).

Artificial stone: the product is highly malleable and can be spliced seamlessly. Cracks appear and can be repaired.

Like DuPont's artificial stone in the United States, its acid-resistant, alkali-resistant, cold and heat-resistant, impact resistance characteristics make it widely used in the kitchen field, many high-end hardcover real estate, and high-end communities are used, and its best is also easier to accept.

The main three countertops are white steel, artificial stone, and quartz stone.

White steel has the advantage of being durable, but the only drawback is that it is not wear-resistant, and the excuse is that it is not handled very well.

The advantage of artificial stone is that it is known as no joints, the toughness is relatively large, the thermal expansion and cold contraction, and it is easy to break.

The advantage of quartz stone is that it has strong hardness and high gloss. But it is also an excuse that has a gap in the handling, and it is easy to identify the excuse.

There are good and bad versions of every countertop. Prices are also different. In a word, good goods are not cheap, cheap goods are not good.

I've hit such a bunch of hands.,The landlord should probably understand, right? Don't work me.