How to polish jeans washed edges?

1. If it is the first time you buy it, you need to pour some white vinegar or salt into the water, and at the same time turn the pants over and soak them for about half an hour to lock in the color. Because dark pants will inevitably fade a little, and white vinegar or salt can make that blue or dark color retain its original shine as much as possible.

2. Place the jeans.

Turn over and put it in water for hand washing to avoid unnecessary washing and fading;

3. Please do not soak your pants in hot water, it will shrink to a great extent, and the water temperature should be kept below 30.

4. Use mild detergent, do not use bleach.

or any product containing bleach or fluorescein;

5. If the jeans are not oily or other dirty, reduce the laundry detergent as much as possible.

The dosage can even be washed with water;

6. When drying jeans, be sure to hang them flat from the waist (fix them flat with clips, do not pull them tight) and turn them over to dry, and dry them in a dry and ventilated place to avoid sun exposure, which is easy to cause serious oxidation, fading or hardening.

7. When grinding with sandpaper, if you want to wear it, it will not get wet; If you want to come up with a cat whisker, you can wear pants and rinse them, fold them, and grind them again. Grind to the desired effect.

Teach you how to make jeans on the original edge, and the finished product is smooth and good-looking, the same as the original.

Sandpaper can be used.

Grinding method: When grinding with sandpaper, if you want to wear it, it will not get wet;

If you want to come up with a cat whisker, you can wear pants and rinse them, fold them, and grind them again.

Just polish it to the desired effect.

If there is no edge, there is no edge, and it doesn't matter, as the first floor said, just get a side out again.

Or just don't get some whiskers out like I did! Just take the free and easy route

How to wash new jeans for the first time:

1. Put the new jeans in a basin for hand washing, first soak the jeans in warm water until the water becomes cold.

2. Soak the whole pair of jeans in water, add a little salt to the water, soak for 20 minutes, and gently rub each part of the pants.

3. After washing with salt water, drain it, and then use laundry detergent to wash it in the general way, and turn out the inside of the pants and wash it again.

4. After cleaning, go into the water again, this is the last time you go into the water, you generally do not need to scrub, you can put it under the shower to soak and wash, and the pants are wrung out in a spiral way, which will make the texture of the cattle raised in the future unnatural and comfortable.

5. Dry the cow and put it in a ventilated place to wait for the water to evaporate and dry, not in direct sunlight, otherwise the cow's leather card will be dry and broken.

Maintenance. 1. Dark jeans should be soaked in salt water for about 20 to 30 minutes before entering the water for the first time, so as to maintain the original color.

2. Dark colors and light colors are washed separately: mixing together will cause color cross-dyeing.

3. Bleach must not be used. Wash with a laundry detergent with no enzymes and blue granules, because the enzyme-added laundry detergent has a bleaching effect and has an impact on the color of the jeans.

4. Avoid direct exposure to sunlight: direct exposure to sunlight will cause serious oxidation and fading.

5. Drying in a ventilated place: not ventilating will make the pants not easy to dry and produce peculiar smells.

6. Wash and dry on the opposite side as much as possible.

7. Use hand scrubbing jeans, try not to use washing machines and brushes, which can effectively maintain the original color of jeans.

Tools & Materials Needed for DIY Ripped Jeans:

Jeans, sandpaper, utility knife, tweezers, cardboard.

1. Plan the holes on the jeans first, and use sandpaper to repeatedly polish these positions several times for distressing.

2. In the sandpaper sanded position, use a utility knife to cut out parallel incisions about centimeters apart. When cutting, it is best to stuff a piece of cardboard in the trouser tube to avoid cutting the back of the trouser tube by mistake. After cutting all the required cuts, throw the torn jeans in the washing machine, wash them in cold water, and dry them thoroughly.

3. Take it out after drying, and you can process those cuts a little to make them look more natural. Use tweezers to tear the blue and white warp and weft threads at the edges of those cracks, so that they are dense and tight, so that they look as if they have been worn out by a person falling from a high mountain.

In order to make the cowboy model jeans look more fashionable, many people will leave white lines on the hem of the pants, and this process is the process of whitening the edges of the jeans. If you have doubts about the exact method of whitening the edges of your jeans, here's a detailed explanation for you.

Generally, the way to whiten the edges of jeans is to use frosted paper or steel wool balls to wear them at the hem of the pants to give them a distinctive white appearance. Some people choose to roll up the cuffs of their jeans first, then use scissors to cut the edges into a flat straight line before starting the whitening process. Therefore, it is very important to comb the jeans and wear them on the matte paper after cutting.

Of course, another way to whiten the edges of jeans is to bleach them with bleach. However, this method may cause jeans to turn white unevenly, and may have a negative impact on the environment, so it is not recommended. Therefore, it may be better to use the method of abrasive paper or steel wool abrasion.

When doing a whitening of the edges of your jeans, you can start by tearing off a small section so that you can double-check your progress. During abrasion, be careful not to use too much force to avoid damage to the fabric of the pants. Also, avoid excessive wear and tear, as excessive wear and tear can lead to a significant reduction in the durability of the pants.

To sum up, whitening the edges of jeans is a very common way to slow down the dust, adding a sense of fashion to the jeans. You can use sandpaper or steel wool balls for abrasion to achieve the goal. However, please be aware that the jeans should be over-worn or over-torn if they are not properly molded, and keep the correct way of wearing them to make the jeans look more aesthetically pleasing.

Tools you need to prepare to make jeans edging: scissors, blades.

Here's how:

1. First of all, align the two trouser legs and use scissors to cut a small cut in a suitable place.

2. Then, along the gap between the scissors, cut off the edges of the two trouser legs.

3. Use a blade to gently cut a few thin cuts on the edge of the trouser leg.

4. Finally, use the tip of the blade to gently draw down on the edge of the trouser leg, paying attention to the light force when scratching, not all at once.

5. After some processing, the edging effect on the jeans is completed.

What kind of effect do you want?

Is it a general slightly broken one with turns? Or is there a tassel? Or is there a hole?

Generally, you can use a knife to cut a small hole and polish it with sandpaper, but there is no sandpaper? With the effect of small stones, it is more natural to put the pants on the ground and grind them with stones.

If you want tassels, you will be able to dismantle, the cloth of jeans is interwoven with horizontal and vertical denim lines, you find a broken dismantling to try to know, remove the horizontal lines of the remaining vertical tassels, remove the vertical lines, leave the horizontal lines of the holes, just like the torn pants we bought, the knees are generally left with horizontal lines.

I have edging here to see.

1. Choose jeans.

First of all, choosing a pair of jeans that are suitable for raising cattle is key, and this type of jeans is often called"Raw cattle", that is, jeans in a natural color that have not been washed or otherwise specially processed.

2. Depulping. In order to maintain the hardness and shape of jeans, they are generally starched before leaving the factory, and they can be soaked in water for 2 or 3 hours after buying them (hot water soaking shrinks more), and it will be more comfortable after the upper body. If you feel that the hardness is acceptable, you can also wear it for a period of time and then take off the pulp, which will fit your leg shape better after washing.

After washing, be sure to dry it in a cool place on the opposite side to prevent sun exposure.

3. Fixing the color. Newly bought jeans also need to do some basic color retention treatment, such as putting salt or white vinegar in water and soaking for about half an hour to lock the color (and then rinse with water), otherwise the jeans will be washed white soon.

4. Upper body maintenance.

After wearing it for a long time, the jeans will fade naturally. You can also put some small items such as leather bags in your pockets, and use the friction day after day to form a unique color drop. Or put your hands in your pockets and use the friction between your hands and your pants to form a color drop.

The color is natural, the traces of the years, a little fading, is the essence of cattle raising.

5. Cleaning and maintenance.

Cattle should be dressed more and washed less. Generally, it can be dried on the reverse side after wearing, breathable and sterilized. It is best to wash the pants once every three months to six months, and even if you wash them, do not use laundry detergent, which is very harmful to jeans.

Put the reverse side in a laundry bag and machine wash it, and air dry the reverse side is the best. If you really don't know how to wash, you can directly buy some cow washing products on the market that are made by professional denim brands.

1. Jeans.

The optimal cleaning time is 6-12 months.

Generally, friends wear jeans for a week or have a little sweat (stolen) to put in the washing machine to wash, in fact, this is very harmful to jeans, long-term like doing it will make your jeans out of shape, wear it will not have close comfort and beautiful legs.

The correct way should be to wash it once every 6-12 months, if you sweat a lot in summer, you can hang your jeans in a ventilated place, spray some water, and let it dry in the wind, so that the sweat smell on the jeans will not be gone; If the jeans are sticky with some clean stuff, you can spray the stolen area with clean water, then gently pinch off the stolen stuff, and then hang it in a well-ventilated area like above and let it air dry on its own!

2. Do not dry clean or machine wash for the first cleaning.

Another reason is denim.

There is a layer of glue on it. Therefore, try not to use machine washing or dry cleaning when cleaning for the first time, it is best to wear it on your own body to clean, so that cleaning the jeans will make the jeans more in line with your leg shape, and the effect will be better. After cleaning, it still has to be hung in a ventilated place like a strip and let it air dry by itself.

3. Jeans must be treated with some color retention before washing.

Jeans must do some basic color retention treatment before washing, otherwise the jeans will be washed white soon.

The color retention treatment is actually simple, soak the jeans in a basin with water before washing, and then put in two spoons of white vinegar and soak for about half an hour, so that the fading of the jeans will not be so serious

A basin of cold water, a spoonful of salt, turn your pants out and soak for minutes! That's it.

Very simple. Soak in salt water for 30 minutes to retain color.

Don't wash jeans directly, teach you the correct cleaning method, don't fade or deform.

Sissy!! I'll wash it for you!!

Tips for washing jeans.

Let me introduce a few tips for washing jeans in the washing machine: washing jeans in the washing machine can save a lot of effort, but pay attention to the following

In order not to fade the jeans, it is better to separate them from other clothes when washing.

Before putting the jeans in the washing machine for washing, it is best to pull the training well, so as not to deform the training until the end of the washing and become more difficult to wear.

If the jeans are dirty, you can soak them for about 15 minutes before washing them with a strong wash.

When exposed to the sun, remember to turn it over first, and then hang it with a small hanger used to dry socks and handkerchiefs to make the trouser tube a barrel-shaped, because this is faster to dry.

How to prevent jeans from changing color after washing them several times? When you buy your jeans, you can soak them in salt water for a day, so that your jeans will look like they were newly bought, no matter what time of day they are.

Hello, jeans are best washed by hand, you can add some salt when washing, salt can keep the color of jeans from fading, but jeans are best not to be washed frequently, you can wash them once every three days, turn them over when drying, and place them in a cool and ventilated place to avoid sunlight.

Precautions for washing jeans:

1.Try to scrub by hand, less with a brush or washing machine, so as not to cause damage to the jeans, it is best to wash the reverse side and dry the back side, as much as possible to maintain the original color of the jeans.

2.Avoid exposure to sunlight, the pigment in jeans will decompose under the light, and after decomposition, there will be no color, which will cause oxidation and fading.

3.Wash dark and light colors separately to prevent dark jeans from fading and staining light clothes, which are difficult to remove once they are dyed. 

There are many ways to depulp first, there are many ways to depulp it, there is a vinegar to soak for half an hour, although it can not be completely despulped, but it will be soft when worn, and then soaked in vinegar for half an hour after it is soft, and take it out to dry it directly after washing, do not wring out the pants, it will be deformed, remember that it is the reverse side, so that the interval between the two times is about 3 months, and the 2 times will probably be as soft as the washed pants bought back, but this is too troublesome, my method is to buckle the buttons and throw the reverse side into the washing machine, Without adding laundry detergent or anything, let the pants stir in the water for half an hour, and when you take them out, they will be depulped. After the desizing is completed, you can slowly start the process of making washing, the process is: every time you take a wet towel after wearing the pants, wring out the kind to wipe the pants, and rub them along the folds you wear, so that the pants will be more suitable for your legs, and it will be effective in about a year, or it may be effective in half a year, depending on the degree of color of the pants, such as levis, lee, edwin, g-star, this kind of pants will be effective in about a month, More awesome like lvc,nbho,evisu this kind of complete effect or more than 1 year,I don't know if the landlord's pants are ** cows.,Is it a national cow or a Japanese cow or a European cow or an old school American cow?

Raising cattle is a science, and there is still a lot to learn. It's a bit long to do the washing, but that's the fun of raising cattle! Pure hand hitting, looking at the top.