Where is it appropriate to install solar street lights in the house?

A solar street light is a lighting device that uses solar energy to generate electricity, which can provide lighting functions at night. When installing solar street lights, it is very important to choose the right location, and here are some suggestions.

First of all, solar street lights should be installed in a location that can fully receive sunlight. The power generation effect of solar street lights is directly related to the intensity of sunlight, so the installation location should avoid blocking sunlight by tall buildings, trees or other obstructions. It's best to choose an open area around the house that is free of shelter and make sure the solar panels can fully receive sunlight.

Secondly, solar street lights should be installed near the areas that need to be illuminated. Solar street lights are mainly used to provide lighting functions, therefore, the installation location should be selected near the area that needs lighting, such as the door of the house, the entrance to the garage, the garden, etc. This ensures that the solar street lights maximize their illumination effect and provide sufficient light.

In addition, the installation location of solar street lights should also take into account safety factors. Solar street lights usually need to bury cables, so the installation location should be selected close to the power supply to reduce the length of the cable and the difficulty of installation. At the same time, the installation location should also avoid interfering with other facilities and pipelines to ensure that other facilities will not be damaged or affected during the installation process.

Finally, the installation location of solar street lights should also take into account aesthetic factors. As a kind of lighting equipment, solar street lights should be installed in a place that can improve the overall aesthetics of the house. According to the architectural style and layout of the house, you can choose the right location for installation, so that the solar street lights can be coordinated with the overall style of the house.

In short, the installation location of solar street lights should be selected near the area that can fully receive sunlight and need lighting, and is safe and reliable, and has high aesthetics. By reasonably choosing the installation location, you can ensure that the power generation effect and lighting effect of solar street lights are maximized, and better lighting services can be provided.

The location where solar street lights are installed depends on the structure and environment of the house. Here are some locations that might be a good fit:

1.The roof of the house: This is the most common installation location to ensure that the solar panels receive plenty of sunlight while being easy to maintain and overhaul.

2.High in the northeast corner of the house: This location prevents the solar panels from being shaded while also ensuring that it operates in full sunlight.

3.Short or open location of the house: If the house is low or located in an open area, the solar panels may not get enough sunlight, so you need to choose a more suitable location to install them.

4.Avoid houses or tall trees: Look at the best balance between the orientation of the installation and the location of the street lighting installation in the installation environment to avoid the house or tall trees blocking the solar panels.

It should be noted that when installing solar street lights, make sure that the solar panels are facing south, so as to make full use of the vertical angle between the solar panels and the sun's rays at noon to achieve the highest charging efficiency. The final installation location should take into account the lighting needs and the charging efficiency of the solar panels, as well as the ease of maintenance and service.

In general, solar street lights.

They are installed on the roof of the house, at the entrance of the house, so that at night, the entrance will look very bright.

Where are solar street lights installed in the house? It should be arranged at the front of the house, which is to the south.

Since it is a street light, you need to consider two issues, one is that the place where the street light is installed must be the place you want to shine. The second is that the street lamp should be able to fully receive sunlight to facilitate solar charging. There should be no shelter around.

Summary. The suitable installation locations of solar street lights are as follows:1Installed on the roof of the house, right at the entrance location, 2The northeast corner of the house is also ok high.

The locations suitable for the installation of solar road fibers and brother lights are as follows: 1Installed on the roof of the house, right at the entrance location, 2It is also possible to go high in the northeast corner of the shed.

The precautions for the solar installation location are as follows: The solar street lamp should be installed in a place where the sun can shine, and there is no obstruction around it to ensure sufficient light. The installation location of solar street lamps must be lightning protection measures to avoid damage to street lamps during thunderstorms and shorten their service life.

The installation position of the solar street lamp should not be close to the heat source, so as not to damage the plastic on the surface of the support rod or lamp due to the high temperature. The ambient temperature of solar street lamps shall not be lower than minus 20 degrees Celsius and shall not be higher than 60 degrees. If it is installed in a cold environment, it is best to take some thermal insulation and mental measures.

It is best not to have a direct light source above the solar panel, so as not to misidentify the lighting control system and cause misoperation. When the solar street lamp is installed, its battery should be buried in the ground of the installation location, and it should be fixed with cement watering, so as not to be stolen and installed in vain.

The location of the courtyard is the best.

The locations suitable for the installation of solar road fibers and brother lights are as follows: 1Installed on the roof of the house, right at the entrance location, 2It is also possible to go high in the northeast corner of the shed.

The above positions are very suitable.

Jiangsu Xinkairui Optoelectronics Technology Co., Ltd. is a professional solar energy.

1. Dig a deep, square mouth frame for the foundation pit, put the four-corner foundation cage into the pit, the protruding part is about a meter above the ground (note that the thread part can not be damaged), and at the same time obliquely put a pipe with a diameter of 80mm, and then pour concrete into the foundation pit.

2. Dig a depth of about meters around its attachment and square meters of battery trough foundation;

3 4 7 days after the concrete has set, prepare to erect the light pole; System ConnectionSystem ConnectionSystem ConnectionSystem ConnectionSystem Connection.

4. Install the LED lamp on the lamp arm and connect it with the main lamp pole for fixation; 5. Start threading: the wire (one red and one black) from the LED lamp through the picker arm, the light pole, to the bottom of the light pole; Connect with controller output;

6. Fix the lamp, and then fix the pick arm;

7. Fix the cross arm of the solar panel bracket on the main light pole and fix it with bolts;

8 Put the solar panel into the bracket frame, and then fix the solar panel on the bracket with screws; At the same time, the wire is connected from the junction box of the battery board, and enters the main light pole through the battery board bracket and cross arm to reach the lower part of the light pole.

9 Fix the solar panel brackets at both ends of the cross arm separately.

10. Put the battery into the battery box, the wire is threaded out of the steel wire hose, fix the bolts and the wire hose, put the battery into the battery tank, and the steel wire hose is threaded into the pipe with a diameter of 60-80mm in the foundation, the steel wire hose is best higher than the ground, and the soil backfill is leveled.

11. Controller wiring: connect with the corresponding position of the controller in the order of battery, solar panel and load respectively (note: first "-" and then "+" and prevent short circuit); 12 The wires on the battery are connected to the wind turbine controller and the solar controller respectively.

13 Remove the input cable of the solar panel from the solar controller, and after about 1 minute, if the bulb can be turned on normally, it means that the line is connected correctly; Otherwise, the connection is incorrect, and you need to check. Then place the controller inside the light pole; Erect the lamp pole erect the lamp pole erect the lamp pole 14 pull up the lamp pole with a crane, make the flange hole position of the lamp pole align with the embedded part (pay attention to the direction of the lamp and fixture), and then fix it with screws; 15. Check whether the bolts of the lamp pole and the embedded parts are fixed, whether the lamp is aligned with the road surface and neat, and whether the lamp pole of the whole road is neat, so that it can be seen from the first lamp pole in a straight line.

16. Check whether the controller is loose; Finally, cover the door panel and fix it;

It's not complicated, you don't need to pull the string or anything, just set up a pile there and install it.

<> "Many roads will be installed on both sides of the solar street lights, which can provide people with light, and they are brighter when they travel at night, and this kind of solar street lights are very energy-efficient, as long as they absorb heat, they can shine. So, let's introduce how to install Min's street lamp solar energy.

1. How to install solar energy for street lights.

1. Install the solar panel first, put the panel on the panel bracket, and fix it with screws. 2. After the solar panel is installed, you can install LED lamps and lanterns, which can be directly aligned with the light wires and connected together. 3. You can lift the lamp pole, check whether the parts are fixed before lifting, and then use the lifting rope to slowly lift the lamp, keep it flat after lifting, and then fix the lamp pole with screws.

4. It is best to install the battery and put the battery into the battery well.

2. Precautions for the use of LED lights.

1. In the process of installing LED lights, protective measures need to be taken, after all, large static electricity may be generated during installation, and if it is not handled well, it is very likely that unnecessary trouble will occur. Therefore, as a construction worker, Xinnayun must wear gloves and clothes to protect against static electricity to reduce the risk of accidents.

2. In the process of making the slide beam with LED lamp, if it shows adverse reactions, such as the increase of leakage current, the instability of the static forward voltage, which is caused by the adverse reaction of static electricity, so once this situation occurs, it needs to be repaired in time to avoid unnecessary trouble.

3. When the indoor current is too large, it is easy to cause the brightness of the LED lamp to darken, and in serious cases, it will also cause the current to burn directly. In addition, when the LED lamp is installed, it needs to be connected in series with the resistor in order to play a good role in current limiting and ensure the normal use in the later stage.

First assemble the solar frame and solar panels, assemble the lamp arm and lamp head, see whether the battery is buried or plugged in, and the plug-in type is fixed in the retention position, and then measure and arrange the connecting wires, all of which are installed and hoisted.