How many days does it take to change the bumper of a car in a 4S shop?

It takes about two days to change the bumper in the 4S shop, because the bumper accessories are all unpainted in the original color, and after the replacement, you need to paint the new bumper according to your body color, paint process, and wait for the paint surface to dry completely before it can be installed, and the 4S shop has more maintenance vehicles, so you need to wait for some time, and it will take two days to replace it.

Three days or so is fine.

Because you want to replace the bumper of the vehicle, then this must be re-shipped, and it is possible that the 4S store is not in stock.

So in about three days you can go and get your own car, hopefully it can help you.

If you have spare parts, it usually takes two days, after all, it takes time to paint.

To change the bumper, you need to put it in the 4S store for about three days. It is not safe to put the car in the 4S shop for maintenance, because there is a lot of news now, and the car has been transferred in the 4S shop.

It needs to be in the 4S store for at least 5 days; I think it's safe to put the car in a 4S shop for repairs.

If you have a reservation, you can use it for an hour, but if you don't have a reservation, it will take three days. It's very safe and some of the staff inside them are very responsible and nothing will happen.

The 4S shop replacement bumper is generally the same as the original.

Under normal circumstances, if you ask the 4S shop to assemble the original bumper, then the 4S shop usually has to use the original parts. However, it is not excluded that some 4S stores take the supply of goods in the auxiliary factory in order to make a profit, and these bumpers are basically sprayed through the later stage of the 4S store, which is naturally not as stable as the original assembly line. After all, the original paint is integrated in the paint baking room above 200 degrees in the factory, so the gloss and durability are better than ordinary post-spray paint.

Bumper original by-factory identification.

The most straightforward way is to check the logo or original label on it, but if you want to start with the paint or quality of the bumper, it is difficult to tell whether the bumper is the original or the sub-factory. First of all, it is difficult to distinguish the color of the car paint by looking at it with your own naked eye. Secondly, measuring the quality of the bumper requires the corresponding instruments, which is beyond our ability, so everyone can check the original label directly.

About 3 days.

If you book the paint in advance, you can paint it in an hour, but if you don't make a reservation, the bumper needs to be painted, and it will take about 3 days. The key is to see if the paint is sprayed before it is installed, or it is installed first and then sprayed with paint.

Car bumpers (anti-collision beams), located in most areas of the front and rear of the car, are ostensibly designed to avoid the impact of external damage to the vehicle's safety system, they have the ability to reduce driver and occupant injuries in high-speed impacts, and now the photo album of the bumper is increasingly designed for pedestrian protection.

Bumper precautions.

Installing corner rubber can reduce damage to the bumper: the corners of the bumper are the most easily damaged parts of the car's shell, and people who don't feel good about driving can easily rub the corners and get scars. This part is protected by corner rubber, which can be attached to the corner of the bumper, and it is very easy to install.

This can reduce the extent of damage to the bumper.

Of course, if the rubber is bruised, it is enough to replace it with a new one. In addition, the corner rubber is a thick rubber pad that is attached to the corners of the bumper, and if you want to look integral to the body, you can spray paint.

Car bumpers (anti-collision beams), located in most areas of the front and rear of the car, are ostensibly designed to avoid the impact of external damage to the vehicle's safety system, they have the ability to reduce driver and occupant injuries in high-speed impacts, and now the photo album of the bumper is increasingly designed for pedestrian protection.

The so-called original parts of 4S spare parts are a little better than the quality of spare parts on the general market and the circulation of repair shops, but the quality of these spare parts can not be compared with the factory loading parts, and most of the loading parts on the market are not available Only the dismantling parts that have not been replaced by the original car.

Look at the conscience of the 4s. 4S can be adjusted from the manufacturer.

Automotive bumpers (anti-collision beams), located in most areas of the front and rear of the car, are designed to avoid the impact of damage to the vehicle's safety system caused by external damage to the vehicle, and have the ability to reduce driver and occupant injuries in high-speed impacts. The bumper is one of the parts that are more susceptible to scratches and damage in the process of using the car, the bumper is made of plastic, and if the scratch is more serious, the black plastic will be exposed, which greatly affects the appearance of the car. Many car owners choose to replace the bumper with a brand new one after the bumper has been severely damaged.

Hello, for your question [How many days does it take to change the bumper of a car in a 4S shop?] This question is as follows: It takes 3 to 4 days to change the bumper of the Heng car in the 4S shop.

The following related exhibition hopes to help you: If you book an hour in advance to change the bumper at the 4S store, if you don't make a reservation, it will take about 3 days to change the bumper. Automotive bumpers (anti-collision beams), located in most areas of the front and rear of the car, are designed to avoid the impact of damage to the vehicle's safety system caused by external damage to the vehicle, and have the ability to reduce driver and occupant injuries in high-speed impacts.

The bumper is one of the parts that are more susceptible to scratching and damage in the process of using the car, the bumper is made of plastic, and if the scratching is more serious, the black plastic will be exposed, which greatly affects the appearance of the car. Many car owners choose to replace the bumper with a brand new one after the bumper has been severely damaged.

Still have questions? Kiss, can you talk about it specifically? Or is there anything you'd like to talk about? <>