I would like to introduce you to the list of automobile wheel spraying manufacturers. 20 starts. 5

Anywhere you can paint, you can spray it, as if there is no such thing as a hub.

You're talking about the color of the hubcap spray on the iron wheel.

You don't need to find a manufacturer, go to the paint market and buy a can of direct spray paint, 5-8 yuan.

There is a sign called Sanhe that seems to be pretty good.

Remove the hubcap yourself, spray it evenly, and spray it again when it dries.

It not only has the fun of DIY, but also can choose the color you want, and the cost is low.

This height is a little smaller to open the Elysée, but at least you have to talk about how much silver you have to prepare and what series you are going to buy? Japanese, Korean or domestic? Or is it European-American?

Is there a focus on security or configuration? Is it to be more fuel-efficient or thick-focused? Disc or disc brakes?

A lot of cars don't care if they don't have a rear impact beam? At least that's all about it, right?

Addendum: Is it 100,000 on the road? The more cost-effective one is the domestic car.

If you have a joint venture, you can only buy K2, Rena, Mazda2, Fiesta, Swift, Avio, Jetta, Polo, Elysee, C2, Logo 207, these cars are the first space is small, your height is relatively high, the second configuration is low, the third most of the above cars do not have rear impact beams, and the fourth joint venture cars at this price are basically front and rear drums, without front and rear disc brakes.

Look at domestic cars again, domestic cars after so many years of development, now basically on the right track, my work is related to cars, my car is Roewe, friends have to drive Chery A3, there are driving a gallop, there are also driving Buick and Honda, their cars I have driven, feel the same, buy a new car is the same as **, unless the character is really not good, there are generally few big problems, you can buy a good domestic car at this price, Pentium B50, Great Wall C50, Roewe 350, Chery A3, MG5 (hatchback), Brilliance FSV, Changan Mobile, Dongfeng Fengshen, BYD FX, etc., these cars are characterized by thicker materials than those joint venture cars mentioned above, and the configuration is high and the space is large.

Some friends say that the quality of domestic cars is not good, in fact, after so many years of development, the quality of domestic cars has leaped forward, some people buy domestic cars and say that there are many small problems, in fact, the joint venture car is the same, what is the central control sound, the gear can not enter, and the examples of not catching fire are not uncommon, in the final analysis, it is still the Chinese people's Chongyang psychology is at fault, some small problems of their own domestic car friends say that the quality is not good, and other people's joint venture cars have problems and say that it should be like this, I have a friend who drove the Buick Regal, bought two years of overhaul twice, There are no less than three minor repairs. In fact, since you buy this car, you have to tolerate it, the car is the same as people, there is no perfect, occasionally there will always be some small problems that have nothing to do with the overall situation, don't bother with it. At least my car and my friend's domestic car haven't seen anything bad.

Of course, if you don't dislike second-hand cars, you can also consider it, like Volkswagen's Lavida and Bora, Citroen's Sega, logo 307, 308 These European cars are good, as long as there is a master to accompany you to see the car, you can still consider it, but the American Japanese and Korean ones don't think about it, the American ones such as GM's Buick, the materials are more kind, but there are a lot of small problems, there is no European car fine, and the Japanese and Korean car materials really dare not compliment, the materials are worse than the domestic cars, but they are expensive and expensive, Not cost-effective.

Hope it helps.

As long as it's a car, it's fine.

The key is how much money to buy.

The first choice for domestic cars is BYD Surui.

About 100,000, then I still recommend that you buy a joint venture car, the joint venture car is indeed better than the quality of the domestic car, and the new Jetta will be listed soon, I suggest that you can pay attention to it, this car is very durable, maintenance is cheap, the quality is indeed very good, the appearance is also very fashionable, I really do not recommend you to buy Japanese cars and American cars, the most honest cost-effective or German cars.

1. Invite the leader to dinner, 2. Take a walk around the leader's house, 3. Talk about things at the wine table, 4. The most important thing is to make the leader feel that you are in the same mind as him.

In the last few days, I invited the leaders to have a meal, and said that I would like to thank them for their care in the internship, and you should return to school temporarily, and invite them to have a meal before leaving, express a little gratitude, and then solve it when the meal is completed, I think it is slightly better.

Let's make up fairy tales. Let's make the post-romance a little bit, almost.

The editor-in-chief unit of the latest national standard atlas 11CJ33 "Ventilation and Lighting Skylight", Sichuan McWei, a ventilator manufacturer, does not use silicone caulking to plug leaks, so that the hidden danger of water leakage can be eliminated.

1 All If the temperature of the graphics card is too high, then you need to clean the dust on the heat sink of the graphics card. In addition, clean the inside of the chassis to ensure ventilation.

Let's clean it up and try it out.

If the configuration is sufficient temporarily, it does not need to be changed. I used to think it was OK, but now overheating is a matter of cleaning.

There are several reasons for this.

and its fans are too dusty. Clean it up.

2.The fan speed is low. When booting up, press and hold the del to enter the CMOS setting, and then enter the security setting, which has the fan speed setting, increase the number of revolutions, and lower the CPU temperature.

Sometimes it's the CPU fan that has too much dust on it that doesn't work properly, so you try to clean the dust.

The configuration is still sufficient. For the problem of heat dissipation, you can change a radiator, because these things will have a lot of dust after a long time...

Dust removal of heat dissipation parts, or change to a higher power fan, the configuration is now sufficient.

Plans can only be made by yourself according to your own learning situation, and what others help you make may not be suitable for you. Let's take a look at any of my subjects that I didn't do well in the last semester. Take advantage of the holidays to make up for it.

Don't be too heavy, read all the books within the scope of extracurricular reading in 20 days.

Friend, I tell you, the vehicle sheet metal is more difficult to deal with, that is, the edges and curvature, because the edges and corners are to strengthen the hardness of the vehicle sheet, but also designed for the vehicle lines, when this part is damaged and needs sheet metal, it is a little difficult for personnel to deal with, because it is true that the original car is a mechanical pressing product, a single sheet metal can not be processed to achieve the effect of pressing molding, then it is necessary to use putty to make up the difference, and the technical good can make up the difference close to the original car condition, But many cases are not up to this level of friends, it is recommended that you make a careful judgment on the maintenance office, if the difference is relatively small, it is not recommended that you let them re-process, because the thickness of the putty is easy to be unfavorable to the paint surface, cracking, uneven color.

I'm spray paint in the 4S shop, generally speaking, the difference is not possible at all, if the difference is big, it will definitely not work, in fact, this is a problem in his shop, or a technical problem of workers, if the problem is not big, don't pursue it, if the problem is big, then talk to him, but the boss should not give you a new get, professional answer!

If it is barely okay to say this in a small repair shop, we go to 4S to want high quality, even non-professionals can see the difference at a glance, can only say that they are not doing their best, or that the shop you go to does not have a strong technician.