Where is Huawei s smart access control, and where is the access card function of Huawei s mobile pho

This access control card depends on your local access control, if your access control card is not encrypted, then use the mobile phone NFC function to copy it, you can use other brands of mobile phones, what Xiaomi mobile phones, oppo mobile phones can be copied, and the brand of the mobile phone has nothing to do with it, generally in the Huawei wallet...

In the wallet app, you need your mobile phone to support NFC function. Click on the wallet icon, and then click on Smart Card, My Smart Card, and Add after entering. Then put the access card that needs to be copied and place it at the corresponding position on the back of the mobile phone for data reading. The access card must be a non-encrypted card.

To add an access card, the following conditions must be met:

1. Make sure that the NFC of the mobile phone is turned on and the network status is normal;

2. Check whether the phone supports it;

Please do it according to your wallet version:

To check the wallet version: Wallet > My > About.

1. HUAWEI Wallet version or above:

1. Go to HUAWEI Wallet > Smart Card > Access Control Card, and go to the Add Access Card page.

2. Click on the simulated physical access control card, paste the physical door card on the NFC sensing part of the mobile phone, and automatically simulate the access control card after the card is successfully read.

3. Simulate the style and name of the access card after success, and then click Finish to add successfully.

2. Huawei Wallet Version:

1. Go to HUAWEI Wallet > Card Wallet > Access Control Card, and go to the Add Access Card page.

2. Click on the simulated physical access control card, paste the physical door card on the NFC sensing part of the mobile phone, and automatically simulate the access control card after the card is successfully read.

3. Simulate the style and name of the access card after success, and then click Finish to add successfully.

3. Huawei Wallet versions are as follows:

1. Go to the HUAWEI Wallet > Card Wallet > Key, and go to the Add Key page.

2. Click Simulation, paste the physical door card on the NFC sensing part of the mobile phone, and automatically simulate the door key after the card reading is successful.

3. Simulate the style and name of the door key after success, and then click "Finish" to add successfully.

The function of the mobile phone access card can be opened after the NFC function key is turned on in the notification bar, and then long press to enter and click on the normal settings inside to scan the card to open and use.

Answer: Hello dear,1、Huawei mobile phone is also in the internal beta version of the wallet application,Added door key function,Using this function combined with mobile phone NFC,You can change Huawei mobile phone into a door key in seconds,Easy to open the door,Avoid forgetting to bring the access control card,The trouble of waiting for a long time at the door of the community。 Set up a HUAWEI phone access card, open the wallet, pull the screen to find the card section, and touch the key.

2. Click the plus sign in the lower right corner and click the simulated physical access card.

3. Put the physical access control card in the NFC induction area, wait for the mobile phone to simulate successfully, click Finish, and click Finish again.

You need your phone to have NFC function, and then find the Add Access Card function in the Huawei Wallet of your phone, so that you can copy the access card, and then turn on the NFC function to automatically detect the card.

The access card function of Huawei mobile phones can be turned on through the NFC function, which is a good process.

The access card of a Huawei mobile phone needs to be connected and matched in smart life before it can be used.

You can directly turn on your NFC function, and then enter your doorbell card, and you can use it directly.

NFC bar, and a drop-down bar shortcut icon.

The phone's access card function can be changed in the system settings and notification bar.

Once you've opened your system settings, find Smart Assist inside.

Then select Add Card and scan to complete.

The access card of the mobile phone is functioning normally, and it can be found in the settings.

The access card function of Huawei mobile phones should be in the settings, and it can be found in the settings.

Judging from your description, if you want to use a Huawei mobile phone to open the door, the mobile phone first needs to have NFC function.

1. You can use the virtual bus card of Huawei HUAWEI Pay. Activate any bus card in HUAWEI Wallet. Next, you only need to set the bus card as the default card, and then go to the card reader of the company or property to read your mobile phone NFC ID to the access control system, and then you can use your mobile phone to swipe the access control, punch in and other operations.

2. Use NFC-SIM card (bus mobile phone card). This needs to go to the business hall to apply for the relevant card, of course, the premise of the card is that the mobile phone supports NFC before it can be used. I won't talk about the cost here, but everyone goes to the business hall to consult, which is generally very cheap.

After having this card, you need to set it up, in the NFC settings, modify the NFC security chip to card 1, and then also read your mobile phone card NFC ID to the access control system in the card reader, and you can use the mobile phone to swipe the access control, punch in and other operations.

3. The frequency of the lower access control system: if the access control system is older, it may support RF (the old RF card, the high frequency and UHF of RF are not discussed here) The new access control system generally supports NFC (new IC card), and the mobile phone is generally NFC frequency.

If you want to open the access control card function on your mobile phone, you must support NFC on your mobile phone. You can check your mobile phone first to see if there is this NFC entry communication function. If you have this function, you can let the phone get the highest permission, and then a NFC communication software can copy your access card.

Hello, in our life, every day when we go to and from work, we need to swipe the access control card in and out of the community, but sometimes we always forget to bring the access control card, causing some unnecessary trouble.

In fact, the Huawei mobile phone we use can be used as an access card, and you can open the door with a touch, so that you don't have to worry about forgetting to bring the access card when you go out in the future.

Method steps: 1. First of all, on the desktop of the Huawei mobile phone, find the [Wallet] app, click the [Card Pack] at the bottom after entering, there are a series of cards and tickets, but we need to add the access control card, so click the [Key] option.

2. Next, you will enter the interface of adding a door key, take out the access card at home, select [Simulation Experiment Access Control Card], and then start reading the card, put the access card in the upper area of the back of the mobile phone, and it will automatically identify the access control card.

3. If the card reading fails, just repeat it a few times, after the card is read successfully, you need to wait about a minute, you can add the access control card to the mobile phone, we can set the name of the door key, as well as the style of the card face.

4. Come and take a look at the access control card I set, of course, this is okay, the card style can be changed at will, if you don't need it, click the three dots in the upper right corner and select [Remove], so that you can delete the access control card.

5. When we are using, we must turn on the NFC function to swipe the card, open the notification bar of the mobile phone to find, in any state, double click the power button to open the access card interface, directly swipe the card, very convenient.

Swipe posture: Put the top of the back of the phone close to the swiping sensing area, and you can also swipe the card when the screen is off.

Swipe position: Place the NFC area of the phone (in the red box) close to the swipe sensing area.

Hello, I am a co-teacher who asks and I am happy to serve you.

Please wait patiently for a few minutes, we are sorting it out, and we will answer you immediately, and please do not end the consultation.

To bind an access card to a Huawei phone, you need to enable the [NFC] function, open [Wallet] - [Card Pack] on the Huawei phone, tap the [Right Arrow], tap the [Plus] icon - [Access Control Card] - [Simulate Physical Access Control Card], paste the back of the phone on the lower half of the access card to read the card, set the [Card Name] and select the card face after the card is successfully read, and finally click [Finish].

If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. If you feel that my answer is still satisfactory, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a happy mood!

Questions. Thank you.

Huawei added the Zhihuai calendar access control card.

Inside Huawei Wallet.

The steps are as follows: 1. First, find and open the Huawei Wallet app on your phone.

2. After entering, slide down to the card area, you can see the option of "Bright and Defeated Key", click to enter.

<>4. After entering, place the access card on your Huawei phone.

At the back cover (make sure the NFC function is turned on on the phone), read the access card.

5. After reading the access card successfully, the mobile phone will automatically add the access control card. If you have more than one door-to-door search card, you can set the names of the different cards to make it easier to distinguish them after adding them, and then click "Done".

You can add a physical door key to Huawei Wallet by using the following methods: After successfully adding a car player, it is equivalent to installing a physical access card into your phone, and you can open the door by swiping your phone.

Method of adding:

2. Click HUAWEI Wallet Card Wallet > Key > Access Card > Simulate a physical Access Card.

3. Paste the physical access control card on the NFC induction part of the mobile phone, and automatically simulate the access control card after the card is successfully read.

4. After the simulation is successful, the style and name of the access control forest rental card, click to complete and add successfully.

Tip: When you sign out of your HUAWEI ID, you will be prompted whether to keep your wallet card on your current device. If you choose to keep this sail sign, it can be used normally after logging in to your account again; If you select Not to keep, the access card will be deleted from the current device.

The kind of access control card of Huawei mobile phone,You can directly open the wallet of Zi Li's mobile phone,Or directly open the menu bar,And then choose to click on its NFC function in it to make the code guess normally。

Huawei adds an access card to HUAWEI Wallet.

The steps are as follows: 1. First, find and open the Huawei Wallet app on your phone.

2. After entering, slide down to the card area, you can see the option of "Key", click to enter.

4. After entering, place the access card on the back cover of your Huawei phone (make sure the NFC function is turned on on the phone) and read the access card.

5. After reading the access card successfully, the mobile phone will automatically add the access control card. If you have multiple access cards, you can set the names of the different cards to make it easier to distinguish them after the addition is completed, and then click "Done".

To add an access card to your HUAWEI phone, you can click directly to enter the member account of your HUAWEI phone and add the card to your card package.

Huawei mobile phones, in the high-end mobile phones, they are equipped with NFC function, you can directly choose to open the analog access card, of course, some encrypted access cards may not be able to simulate.

1. Open the wallet on the desktop of the mobile phone and log in to the account, switch to the card package on the home page, click the plus button, select the key to open 2, click the simulation option on the right side of the mobile phone to simulate the existing door key on the page of adding the door key, or simulate the smart community access control, complete the simulation access card setting according to the prompts, and then turn on the NFC function on the mobile phone to use the mobile phone to swipe the access control.

Huawei's wallet has this feature.

1. First of all, in your mobile phone, open [Wallet], as shown in the figure below.

3. Then in the page that opens, select My Key and click Add, as shown in the figure below.

4. Then in the page that opens, select "Simulate Physical Access Control Card", as shown in the figure below.

5. Finally, put the access control card on the back of the mobile phone to read the card, as shown in the figure below.

Huawei adds access control card in**,This should be added in the settings。

Huawei mobile phone simulation access control card one is that the mobile phone itself supports NFC function, and the other is added in the mobile wallet, smart card, and my smart card, and you can read the access card data according to the prompts. The access card needs to be a non-encrypted card.

Huawei mobile phones simulate access control cards, which require the mobile phone to have NFC function.

If your mobile phone has NFC, then, enter the wallet, smart card function, and follow the prompts to simulate the access control card.

However, at present, the adaptive access control card is limited, and the encrypted access control card can basically not be copied.