How do I zero out the network data? How to change 20 to 0 in the network settings

1. Select the Start button and find the settings option in the pop-up menu;

2. In the opening settings window, find Network & Internet;

3. Enter the network and Internet details window, and you can see the data usage option on the left;

4. Select the data usage, and you can see the statistics on the right, including the pie chart of wifi and network cables.

5. Select the usage details to enter the details screen, where you can see different applications.

The amount of traffic used is up. It feels a lot like a mobile phone.

6. The benefits of adding traffic statistics It is still very helpful to see more intuitively the traffic used by those applications and those who secretly run traffic in the background.

How to reset and clear data usage in win10:

1. Use shortcut keys.

win+r" to open the running window, enter "msconfig" and press enter;

2. In the open "System Configuration" window, select "Boot", and then check the "Secure Boot" in the "Boot Options", the default will be "Minimum", then we click "Apply" to confirm, the following window will pop up;

3. We click "Restart", then the computer will re-enter safe mode.

You may be asked to enter a password when you turn it on;

4. After entering the safe mode with the computer, we directly open the file explorer with the shortcut key "win+e".

Then open it according to the following path: C: Windows System32 SRU, select all the files in it and delete it; (Note: It's not to delete the SRU, just to delete all the files inside).

5. After completing the above operations, we will come to the system configuration page again, uncheck the "Full Boot" checked before, and click "Confirm", and choose to restart the computer according to the prompts;

6. After rebooting the computer, open the "Data Usage" set again to see if it has been recounted? If you need to recount next time, follow the steps above to do it again.

Just cancel the card'

If you want to clear the network data, you can directly delete the data function of the software, or you can directly format the network.

Which one of these should also ask some Internet gods to help take a look? Just let them help you figure it out.

Regarding the "reserved bandwidth" of 20 in XP or 2003, there is a corollary: after removing the speed by 20, XP has done something to the bandwidth. These are popular phrases online, but you take the time and effort to remove the limitation, only to find that the speed doesn't improve!

In fact, there is no need to remove it at all. This 20 bandwidth is not "reserved", but means that a program using a QoS Application Programming Interface (API) can request a maximum of 20 bandwidth per interface base link, but if the program is not fully utilized, this bandwidth can still be used by other programs.

According to Microsoft's Technical Resource Planning (SRP), applications running on Windows XP PCs can share all of the network bandwidth unless there is an application specifically requesting priority bandwidth. However, if the requesting application does not send data, these "predetermined" bandwidths can still be used for other applications.

。。By default, the aggregate bandwidth that an application can prescribe for a base link on each interface of the end system is up to 20 percent of the base link speed. If the application that has scheduled the bandwidth does not send enough data to take full advantage of the bandwidth, the unused portion of the scheduled bandwidth will still be available for other data streams on the same host.

It can be seen that the so-called reserved bandwidth of 20 is purely taken out of context by some people and misleading.

1. Click Start--Run-Type, click "OK", and open the "Group Policy" setting interface.

2. Click on "Computer Configuration", "Management Template", "Network", and "QoS Packet Scheduler" in the "Group Policy" interface, find "Limit Reservable Bandwidth" on the right, select "Properties", open the Limit Bandwidth dialog box, click "Enable", and then change the number "20" to "0".

If there is a problem with the NIC driver, re-drive the NIC again.

2. IP settings conflict.

3. Select whether the startup type of My Computer-Right-Click-Management-Services-Applications-Services-Network Connections is turned off, and if it is turned off, it will be changed to Automatic.

If you are using a LAN such as a router, the normal network connection only means that the connection from your computer to the router is normal, and it does not mean that the connection from the router to the Internet is also normal. If yours is broadband, call the Internet service provider directly, this is their problem.

If there is a wide band fault, you can troubleshoot the fault by using the following methods:

DAO 1 uses a stand-alone dial-up number, if you use a router, please disconnect the router for testing when you are temporary;

2 Restart the modem and the computer;

3 Re-create the broadband dial-up connection and try to dial again. How to do it: Start the Program Attachment Communication New Connection Wizard.

If the self-troubleshooting still does not recover, you can log in to the mobile phone business hall Customer Service Broadband Fault Report for feedback, and we will get in touch with you as soon as possible.

Depending on whether you're copying a cat or a router, if it's a cat, it might be bai

There is a problem with the DU driver or NIC of the NIC DU.

If you use zhi is a route, first use the dao cat to connect directly to see if it doesn't work, then it means that there is no problem with the computer and the cat Then connect the route to see if you can enter the route can enter to see if the account is set up incorrectly Set it up again If you can't enter the route, it may be the route is to restore the route to factory settings and then enter the route to see if it doesn't work, no, the problem with the routing is that there is no problem with the network cable, and the network is not in arrears Resolved.

The lower the average value, the faster the DNS response, and the smallest "Enable" can be selected.

2.If you are too far away from the router or go through too many walls, the signal strength will be low, and the slightest fluctuation will occur, which will cause the connection to be disconnected and reconnected instantaneously.

3.If your router has set security measures such as IP address restriction or MAC address binding, check whether the router has IP address restriction or MAC address binding.

4.Reset the router to factory settings and reconfigure the wireless router.

5.If there is no problem with the above settings, then you need to reinstall the wireless network card driver.

Check the network cable, check the network card, ping the route to see if it can't work, if it doesn't work to automatically get IP and DNS, you can set it manually, and if it doesn't work, you have to check the route and your host.

Or enable manual settings, don't get the IP automatically;

The network shows that it is connected, it can only prove that your computer is connected to the router normally, the DHCP function is normal, you can get the IP address assigned by the router, it does not mean that you can surf the Internet, you open the command prompt, ping the gateway (or, see what route), if your router address is , and then set a, (* can be 2-254), the gateway will set the route, and then set DNS

If you try to surf the Internet and even send a package, then you don't have to look at the bytes of the packet to see if it's **) It's basically a system problem.,Shut down and restart,Sometimes some services in the system fail.。

Workaround:

1. Press the win+r key combination to open the run, and enter in the run box: Click OK to open the service;

2. Find the diagnostic system host in the service interface and double-click to open it;

3. In the diagnostic system host attribute window that opens, change the startup type to [Auto], and click Apply --OK.

4. Start the diagnostic system host service to record the data usage.

The network is definitely not connected, you set up your own IP, and change it upstairs.

It is most likely a problem with the NIC settings.

The local connection is connected, which means that you and the device directly cascaded at the upper layer are physically connected and sent, indicating that your network card is working normally.

But it doesn't receive the message, the network card does not receive the data, that is, your network is not connected to the solution: first determine your Internet access mode, if it is dial-up Internet access, your computer is directly connected to the modem, then so local connection does not make much sense to you.

If you are connecting to the Internet through a network, then you need to contact the maintenance staff of your network, and you need to make sure that you are on the correct IP address of the network.

If you accept 0 packets.

You won't get the address.

The reason for this is most likely not the fault of your machine.

It is mostly a problem with the server or switch.

First of all, it should be abnormal, if it is normal, it should be a problem with the crystal head.

Please check the route or dial the interface directly without routing to see if you can access the Internet, is your unit prohibiting you from surfing the Internet? If so, then there is no way, the link you show is a LAN link that does not go to the Internet, if you can access the Internet and your link does not work.