What is the difference between paint board and blister board

The characteristics of the paint board are bright and easy to shape, with strong visual impact, very beautiful and fashionable, strong anti-fouling ability, and easy to clean. The disadvantage is that it should also be carefully cared for when used, afraid of bumps and scratches, once it is damaged, it is difficult to repair, and it should be replaced as a whole; Kitchens with a lot of oil smoke are prone to color differences.

Blister board is an amorphous, odorless, non-toxic, highly transparent colorless or yellowish thermoplastic engineering plastic, with excellent physical and mechanical properties, especially excellent impact resistance, high tensile strength, bending strength and compressive strength; Low creep and dimensional stability; It has good heat resistance and low temperature resistance, stable mechanical properties, dimensional stability, electrical properties and flame retardancy in a wide temperature range, and can be used for a long time under -60 120; Small water absorption, small shrinkage, high dimensional accuracy, good dimensional stability, and small air permeability of the film; It is a self-extinguishing material; Stable to light, but not resistant to ultraviolet light, good weather resistance; Oil-resistant, acid-resistant, intolerant of strong alkalis, oxidizing acids and amines, ketones, soluble in chlorinated hydrocarbons and aromatic solvents, easy to cause hydrolysis and cracking in water for a long time, the disadvantage is that due to poor fatigue strength, it is easy to produce stress cracking, poor solvent resistance, and poor wear resistance.

To sum up, although the blister board is not as bright and smooth as the paint board, it is more simple and durable, and it is better to use the blister board.

Made of polyvinyl chloride. This is a kind of density board, and it is also a more common plastic sheet on the market, the main material is polyvinyl chloride, which is what we often call PVC or PET, and the surface needs to be vacuum blistered or molded by PVC to form. The thickness is large and small, such as the thinnest can reach millimeters, and the thickness can reach 3 millimeters, which can be customized according to the needs of the owner.

Because this kind of board is made of MDF as the basic material, the surface is relatively flat, and it can also be carved into a variety of patterns, and the finished product is more beautiful. If you have a European style or a pastoral style at home, it is very suitable for choosing this kind of board.

Tips for buying blister boards

1. Identify the substrate.

The substrate of the blister board is a density board, the density strength is directly related to its quality, we can weigh the weight of the substrate when purchasing, the plate with high density, the ability to eat nails and the ability to hold nails will be much better.

2. Identify the quality of the membrane.

When purchasing blister boards, you can see whether the blister film is uniform, whether there is color difference, surface crusting, etc., a good blister board will have a certain thickness, the performance will be much stronger, and the grade is naturally different. Whether the surface of the door panel is smooth and whether there is a bulging place, if there is, it means that the quality control of the substrate grinding process is not very good, then there may be problems in other manufacturing links.

Blister board is a very commonly used engineering plastic board, which has a wide range of uses and good impact resistance, whether it is stretched. Both flexural and compressive strength are high.

Many home improvement customers will ask, in addition to solid wood, what is the most environmentally friendly board? I originally wanted to give him a simple suggestion, but I think there should be a lot of decoration in the jar, and Xiaobai has a serious lack of understanding of the board! Some students may still not know what kind of board they use for the cabinet they bought.

Let's talk about it, by the way, some unknown plate insider, I hope to provide reference for the compatriots behind, the most important thing is to reduce detours, to avoid being fooled by merchants, after all, a set of cabinets is cheap thousands, often tens of thousands, do not choose Ba Shi is too sorry for the silver he spent There are too many classifications of plates.

I'm not an expert, but I'm just discussing what I know with netizens and sharing it with you.

For furniture panels, we must first clarify the environmental protection standards First, we must clarify a concept, all the e0 e1 e2 and so on advertised on the market today are from the European environmental protection requirements for wood, many businesses in China have applied it today, but is this statement accurate.

Not necessarily. Because in Europe, there is no such thing as E0, but there is a standard of E1 in Europe, which is higher than E1 and is called F F is formulated by Japan), the environmental protection standard of F is less than or equal to, and the European E1 environmental protection standard is less than or equal to 0.

5mg/l。At present, in the world, Japan and Denmark in Europe strictly implement the F standard, while the rest of Europe implements the E1 (please note that it is the European standard E1) standard, and EGGER also sells two types of particleboard in China: E1 and F.

But today many Chinese businesses are promoting e0, but in fact, there is no e0 in the world, it is a statement invented by the Chinese, and so far, China's legislature has not clarified e0, e1, e2 these terms and standards, but now in the country everyone said more, they are used to it, and they acquiesce. In fact, China's environmental protection department currently has a clear national standard for wood-based panels, that is, less than or equal to.

At present, in China, Beijing Kebao Boloni and Chengdu Liweijia are the first to propose and promise to use the environmental protection standard of the board is 3 times higher than the national standard, and the full amount of the bill is free if it does not meet the standard. In terms of the use of plates, Kebo Boloni uses Malaysian Evea boards, and Liweijia uses EGGER boards imported from Europe.

Hello, I'm glad to answer your question, wait for me to answer and send it to you later 1. Blister board is a thermoplastic engineering material. 2. Its color is rich, the wood grain is more realistic, it has the advantages of scratch resistance, heat resistance, stain resistance, etc., and the daily maintenance is relatively simple, even if it is directly cleaned with a steel wool ball, it does not matter, and the surface color will not fade. 3. Moreover, the blister board seals the four sides of the door panel into one, without edge sealing, which solves the phenomenon that the plate is easy to open and deform.

Hope it helps.

It has excellent physical and mechanical properties, especially excellent impact resistance, high tensile strength, bending strength and compressive strength; Low creep and dimensional stability; It has good heat resistance and low temperature resistance, stable mechanical properties, dimensional stability, electrical properties and flame retardancy in a wide temperature range, and can be used for a long time under -60 120; There is no obvious melting point, and it is in a molten state at 220-230; Due to the rigidity of the molecular chain, the viscosity of the resin melt is large; Small water absorption, small shrinkage, high dimensional accuracy, good dimensional stability, and small air permeability of the film; It is a self-extinguishing material; Stable to light, but not resistant to ultraviolet light, good weather resistance; Oil-resistant, acid-resistant, intolerant of strong alkalis, oxidizing acids and amines, ketones, soluble in chlorinated hydrocarbons and aromatic solvents, easy to cause hydrolysis and cracking in water for a long time, the disadvantage is that due to poor fatigue strength, it is easy to produce stress cracking, poor solvent resistance, and poor wear resistance.

Summary. Which is a good blister board between high-gloss paint board and blister board First of all, we can consider it from the style of the home, if your kitchen is modern and simple, it is recommended to choose a paint board; If your kitchen is simple European style, it is recommended to choose blister boards. Lacquer plate its.

From the perspective of consumer groups, young people will prefer the paint board, its color is bright, and the personality of the young people is more consistent, and the fire resistance of the paint board is also good, due to the high rejection rate of the paint board, the process requirements are also. If from the point of view of durability, the blister board has good wear resistance and stain resistance, as long as we use it reasonably, it is not easy to deform and open, and its seamless PVC film pressing process does not need edge banding, and there is no edge banding.

Which is a good blister board between high-gloss paint board and blister board First of all, we can consider it from the style of the home, Wang Sen, if your kitchen is a modern and simple style of Conglingtuan, it is recommended to choose a paint board; If your kitchen is simple European style, it is recommended to choose blister boards. Lacquer plate its. From the perspective of consumer groups, young people will prefer the paint board, its color is bright, and the personality of the young people is more consistent, and the fire resistance of the paint board is also good, due to the high rejection rate of the paint board, the process requirements are also.

If from the point of view of durability, the blister board has good wear resistance and stain resistance, as long as we use it reasonably, it is not easy to deform and seep orange and open the phenomenon, and its seamless PVC film pressing process does not need edge banding, and there is no edge banding.

If you make a sofa surface, it is better to absorb plastic boards or high-gloss paint boards.

Pro-blister door panel is good. Waichun is also known as molded door panels, and the country grips the forest and digs it"No defects in the board", originated in Germany, is a very mature and very popular wardrobe cabinet material in Europe. Friends who have an impression of European style must know that there are various concave and convex shapes on the surface of the cabinet and wardrobe doors, and the style is gorgeous, many of which are blister door panel materials.

Blister door panels are divided into two categories: matte molded plates and high-gloss molded plates, which can be processed into various core shapes.

Dear, hello, I am happy to answer for you: blister door panel and paint door panel which is good Answer: dear, hello, paint cabinet door is better 1

The paint door is more beautiful, the outside is high-end, but it is a little more expensive, and the blister board is cost-effective Advantages: good feel, high strength, high brightness, bright color, smooth surface, strong anti-fouling ability, easy to clean, surface paint can effectively prevent dust and water, moisture, and no edge banding; No oil seepage, no fading, thank you for your patience and waiting. The above is all my reply, if you are satisfied with my service, please give a thumbs up, and I wish you all the best!

Peace and joy! <>

The advantage of paint-free board is that it has a solid wood core.

1. The leading board manufacturing industry is a solid wood environmentally friendly paint-free board for home decoration, and the advantage of blister board is that it can be shaped, and the disadvantage is that there is only one material of MDF, which is relatively inferior.

2. The blister board is made of MDF as the base material, with good surface flatness and easy to shape. Cabinets made of blister boards are carved and milled with patterns, and after molding, the patterns are diverse and three-dimensional. Although stable to light, it is not resistant to ultraviolet light.

Long-term water is easy to cause hydrolysis and cracking, poor fatigue strength, easy to produce stress cracking, poor solvent resistance, and poor wear resistance.

3. The design and production of paint-free board products are exquisite, the modeling color is reasonable, the construction is convenient, the sawing is good and the cutting is good, never broken, the use of paint-free lines for repairing and trimming, and the glue bonding does not need to worry about the ash after nailing, and the paint-free board of the solid and beautiful board does not need to be painted, which avoids the benzene pollution in the paint, and there is no threat of leukemia, which can save the labor and paint costs of painting after construction.

4. From the overall situation above, it can be roughly seen that the performance of paint-free board and blister board is very good, but from the perspective of wear resistance, blister board is still slightly inferior.