Does the HP LaserJet Pro MFP M426F M427F have a copy function?

Yes, the copy function is supported.

Yes, this is an all-in-one machine with a copy function.

HP+LASER+MFP+136W printer copying and scanning operation steps.

Hello dear, 1. First of all, make sure that the program of the stove cover in the computer is installed, and the data cable is connected normally. Then place the file you need to scan on the printer panel with the lid closed. 2. Then open "My Computer", find the control panel and enter it, and lock the "Hardware and Sound" function.

3. Click "View Printer of the Device" and lock your printer device (M1005) after entering. 4. Right-click and select "Start Scan". 5. You can click Preview first, confirm that the file and placement are correct, and then click to scan.

Please note that the scan usually takes 10-60 seconds, so please be patient. 6. After the scan is successful, the pop-up window can name the target file, click "Import" after naming, and the path folder where the scanned target file is stored will pop up after the import is completed. You can double-click to view it, and the scan is over.

1. Open the Microsoft Store that comes with the Win10 system. Open by: Task Spring Quiet Bar.

That's it. <>

Enter HP Scan and Capture.

3. HP Scan and Capture software. How to start: You can click the launch button directly in the Microsoft Store, or find its shortcut in the desktop menu bar.

4. Select the device.

First of all, whether this printer has a network printing function, if the belt is assigned to the printer on the router a LP will be 0k. If not: Set up LAN printing, share the printer to the LAN, and then go through the wireless router.

Find the printer in the LAN and start printing 0k, the specific steps are as follows:

1. We click on the copy option in the printer settings.

2. Then we click on the image adjustment option in the pop-up interface.

3. In the interface, we adjust the darkness to darker, adjust the clarity to clearer, and then click OK.

4. Then we click on the Optimize Text option in the interface.

5. Then adjust the printed **, click OK to complete the setting.

1. First of all, you need to open the printer and put the ** or file you want to scan in the printer for copying.

2. Then you need to turn on the computer connected to the printer, enter the control panel, find the view device and printer under "Hardware and Sound" and click to enter.

3. Then you need to find the printer you have installed.

4. Click on your printer to see the start scan, and then click to start the scan to enter the scanning interface.

5. Click Scan directly, and now the file is being scanned.

6. After the scan is completed, it will pop up an interface, click "Next".

7. After the import is completed, it will pop up the saved folder, where you can find the file you scanned, but it is saved as a **file.

You can use the built-in scanning, try it out, click on the scanner and camera wizard in your Paint software, or right-click on the printer icon to start scanning.

About the 128 scan issue.