Can ios9 3bata3 be upgraded to ios9 3 official version?

Neither the Apple beta 3 nor the official version has yet to be released.

If it is released, Apple can flash the computer and update to the official version.

Prepare before flashing the phone with XY Apple Assistant:

1. You need to back up important data before flashing your iPhone, and XY Flashing Assistant provides a backup function.

2. Make sure you have turned on the Apple ID lock (i.e. Find My iPhone function), and if so, turn it off to prevent it from being activated due to forgetting the Apple ID password after flashing. How to turn off: "Settings" - "iCloud" - "Find My iPhone" select to turn off;

XY Apple Assistant Flashing Tutorial:

1.After successfully connecting the device, click "One-click flash";

2.Enter the import or firmware page, you can automatically match the flashable firmware version, click "Start Flash" to start the firmware, and the firmware will automatically enter the flashing process after the firmware is finished. If you have the firmware, you can directly "import the firmware" to start flashing;

It takes about 5 minutes to flash the machine, please wait patiently during the flashing process, do not disconnect the device or perform other operations;

4.After brushing the machine, it will automatically enter the activation process, and you can activate it.

Solve Beta 3 how you level up.

3. After successfully obtaining the "Configuration Pichun Description File", you can open and click the "Install" button in the upper right corner to install this "Configuration Description Jujube Macro".

4. Then open the [Settings] interface of your phone, and enter the [General] - [Software Update] interface in turn to view the latest update notification. Due to the large upgrade file of the beta1 version, it is recommended to upgrade in a Wi-Fi environment.

5. After clicking the "** and install" button, you can ** the latest version of the system, the whole installation process is the same as other systems before, and you can complete the upgrade operation by waiting patiently.

6. Compared with the official version of the system, the latest version of the beta version has greatly improved the running speed of the system, and at the same time, memory optimization, program startup and graphics acceleration have been improved.

3.Tap Back Up Now to back up important data on your device, just in case.

4.Then press and hold Shift(Option) on your keyboard, click the [Check for Updates] button on the iTunes interface, and select the corresponding version of Beta2 firmware to upgrade.

5.Successfully upgrade to beta2 and follow the prompts to activate on your device to start your new beta2 journey.

The above is all the content of the beta2 upgrade tutorial, if you can't upgrade normally or can't verify, it may be caused by network problems, you can try to switch to the mobile network, and then click verify. If that doesn't work, try a few more times.

Precautions are required to upgrade to the official version

1.At present, Apple has turned off the service verification, and after upgrading to ios9, you can no longer downgrade from ios9 to a perfect jailbreak;

2.Friends who have been jailbroken are unable to pass the OTA upgrade, it is recommended to use the iTunes upgrade method;

The system only supports iPhone4S to be used on the device, and iPhone4 is no longer applicable.

Beta upgrade tutorial

Part 1: iTunes Upgrade Recovery Bet1 Tutorial.

Note: Restoring the firmware through iTunes will erase all crashed data on your iOS device, so it is recommended to back up your important data first.

Jailbroken iPhone iPad iTouch using iTunes to upgrade restore may report unknown errors, please rest assured! iPhone iPad iTouch Upgrade If the restore fails, it will automatically enter the recovery mode, please connect iTunes and restore the firmware again.

It is possible to upgrade beta4 using XY Apple Assistant.

Prepare before flashing the phone with XY Apple Assistant:

1. The flashing system must check "Keep user information to flash the machine", otherwise it will not be activated after flashing.

2. Before flashing, you need to do a good job of backing up important data, XY flashing assistant provides a backup function.

3.Make sure you have turned on the Apple ID lock (i.e., Find My iPhone function), and if so, turn it off to prevent it from being activated due to forgetting the Apple ID password after flashing. How to close:

Settings - "iCloud" - "Find My iPhone" option is turned off;

XY Apple Assistant Flashing Tutorial:

1.After successfully connecting the device, click "One-click flash";

2.Enter the import or firmware page, you can automatically match the flashable firmware version, click "Start Flash" to start the firmware, and the firmware will automatically enter the flashing process after the firmware is finished. If you have the firmware, you can directly "import the firmware" to start flashing;

It takes about 5 minutes to flash the machine, please wait patiently during the flashing process, do not disconnect the device or perform other operations;

4.After brushing the machine, it will automatically enter the activation process, and you can activate it.