Swift Wireless Router sets up the phone can t access the Internet

1. If the opportunity allows; Restart the wireless router; See if you can solve the problem.

2. In Make sure your phone is within the wireless network coverage range, click "Scan" to refresh the wireless network list.

3. Connect the computer to the router through the network cable and log in to the management interface of the router.

4. In Wireless Settings - Basic Settings, the channel is between 1 and 11, the wireless function is turned on, and the router is restarted.

1. The unsuccessful wireless connection may be caused by incorrect settings of wireless password and other parameters. A new key entry attempt.

2. Please make sure that the wireless router does not have the wireless MAC address filtering function enabled; Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function.

Three: What should I do if the wireless connection is successful and I can't open the web page?

First of all, check whether the router is connected to the external network, log in to the router management interface, and look at the running status - WAN port status, if it is 0, please follow the router quick setup guide to set it again.

2. If the computer can access the Internet, the mobile phone cannot; Check whether the SSID number of the wireless router is in Chinese; If it is changed to letters and numbers; Mobile phones sometimes can't effectively recognize Chinese:

3. If the above cannot be solved: we set a static IP for the mobile phone

4. The wireless router supports between 15-20 wireless devices; When the maximum number of connected wireless devices is exceeded, even though you are connected to Wi-Fi; But you're wireless; At this time, you can unplug the wireless router; Turn on the wireless router after 10 minutes.

Is your phone connected to a wireless router?

Enter the router settings page with your browser**.

Here's how:

1. Plug the network cable (the network cable from the cat) into the WAN port of the router and turn on the power of the wireless router.

4. Then enter the account name and password (there is also a prompt for the original data on the back of the router) and click OK.

5. After entering the setting interface, follow the setting wizard to select the Internet access method, enter and password.

6. Save, click Wireless Settings, click Wireless Security Settings, enter the wireless password, save and restart the router.

7. If it is abnormal, you may wish to click the reset button of the router and set the router again.

Hello! Here's how to set up a wireless router:

1. Enter the router address, connect the wireless router, enter the address you see on the router in the browser, generally of course, if your home is using ** online network, then you need to prepare an additional modem, commonly known as "cat").

2. Enter the corresponding password, and after entering, you will see that you have entered the corresponding account and password.

3. Select the Setup Wizard, and then enter the operation interface, you will see a Setup Wizard on the left, and enter (generally pop up automatically).

4. Enter the Internet mode setting and set the interface of the wizard.

5. Click Next, enter the Internet access method settings, we can see that there are three Internet access options, if your home is dial-up, then use PPPOE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer. The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP.

I chose PPPoE because I dialed.

6. Enter the password, choose PPPOE dial-up Internet access to fill in the Internet account and password, this should be understood by everyone, there will be an account number to open broadband, fill in it OK.

7. Set the password of the router, and then enter the wireless settings after the next step, we can see the channel, mode, security options, SSID, etc., generally SSID is a name, you can fill it in casually, and then the mode mostly uses 11BGNFor wireless security options, we need to choose WPA-PSK WPA2-PSK, which is so safe that it will not be hacked and rubbed by the network.

8. The next step is to set it up successfully.

9. Click Done, the router will automatically restart, at this time you should wait patiently. The interface that appears after success.

10. How to connect the mobile phone to wifi is simpler, when your router is set up, click the menu key of the mobile phone, and then enter the mobile phone settings, the first item is wifi, and then you set it to on, click to enter the wifi list, and select the wireless network name set in your previous router. Enter the password you set earlier to connect.

Summary: How to use a wireless router, is a more common problem, but also a relatively simple problem, I believe that as long as you have an experience, you can also become a god, of course, the router settings are far from these simple content, there are more setting options after logging in to the router settings page, set other options, such as binding MAC address, over IP, firewall settings, etc., can make your wireless network more secure, to prevent being rubbed off the network.

Here's how to set up a password for your Swift Wireless Router with your phone:

1. First of all, the phone needs to turn on wifi and connect to the wireless router you want to set up.

2. The next two steps are the same as in the computer, open the browser, enter the IP address of the wireless router in the address, such as, and then click "Enter".

3. Open the user login page immediately, enter the correct account and password, and touch "User Login".

4. After the account and password are verified, you will enter the background management page of the wireless router, and the first thing to display is the "Status" page and navigation link.

5. Select "Device Information", and then scroll to the bottom of the page to see the detailed "Basic Device Information".

6. Select "Ethernet Interface Information" and scroll to the bottom of the page to see the detailed network and client information.

7. Select "WLAN Interface Information" and scroll to the bottom of the page to see the detailed wireless network configuration information.

8. Set the required configuration information at the same time, continue to scroll to the bottom of the page, and select the "Save Application" button to save the configuration information.

9. Select "WAN Access Settings" at the navigation link, and then scroll to the bottom of the page to see "WAN" and "Network Information", and then "Save Application" after configuration (some routers cannot be configured here).

10. Then, select "User Management", scroll to the bottom of the page, you can change the account and password of the router background administrator in the "Access Control", and select "Save Application" after the setting is completed.

11. After all the settings are configured, you need to select the "Device Restart" link to restart the wireless router for the settings to take effect.

Judging by your **1, the interface is wrong!

Telecom's optical modem interface,Generally, only network port 1 is valid (that is, the account opened by telecom for you can only be accessed from network port 1),The network port is prepared for increasing the number of households (generally there is no extra account not opened),ITV is used to watch network TV (need to be connected with the IPTV set-top box,And then output sound from the set-top box、** to the TV). According to this, the WAN port of your wireless router should be connected with the network port 1 of the optical modem (that is, the blue network cable in ** is connected to the WAN port of the wireless router), and the network cable of the network port is not used, so it is OK.

In addition, the 4 LAN ports of the wireless router can be connected with the computer network card interface with the network cable to achieve wired Internet access. I don't know if your wireless router is set up correctly, if it is correct, the above method will solve your problem. I hope it can help you, the problem is solved, remember to order!

Find a friend who knows a little bit to help you set it up.

Check the following aspects:

1. Make sure that the network cable of the router is connected to the modem, router, and computer correctly, and the corresponding indicator lights are normal;

2. Enter the default login address address of the router in the address bar of the browser (for example, enter the user name and password to log in to the router settings interface, check whether the "WAN port status" obtains the IP address normally, if it prompts "Dialing failed", please click Help to view, and follow the steps in the help to troubleshoot;

3. You can also directly use the router first, use the cat dial-up to try the Internet, see if you can dial up the Internet, if you can, then connect to the router and try again.

There are two main reasons why the fast wireless router cannot be connected to the Internet after it is set up:

1. The user settings are incorrect;

2. Broadband operator issues, these two issues will be introduced in detail below.

1. Determine the reason for not being able to access the Internet.

Please remove the fast wireless router first, let the computer directly connect to the moden, optical modem or home network cable, and then dial the computer with "broadband connection" to see if it can access the Internet normally.

At this time, if the computer can access the Internet, it means that the user settings are wrong, resulting in the fast wireless router cannot access the Internet; If the computer is not able to access the Internet at this time, it is most likely a problem with the broadband operator.

2. Solution to user setting problems.

1. Set the IP address of the computer correctly.

2. Install the fast router correctly.

1) **Online networking: You need to prepare 2 short network cables, one network cable is used to connect the WAN interface of the fast router and ADSL modem (cat); Another network cable is used to connect any of the LAN (1, 2, 3, 4) ports on the Swift Router to the computer used for setup.

**How to install the router when you are connected to the Internet.

**How to install the router when you are connected to the Internet.

2) Optical brazing Internet access: Please prepare 2 network cables, one network cable is used to connect the fast WAN interface and the optical modem; Another network cable is used to connect any LAN (1, 2, 3, 4) port on the fast router to the network cable interface on the computer.

How to install the router when surfing the Internet.

How to install the router when surfing the Internet.

3) Network cable home Internet access: Please prepare 1 network cable, first plug the home network cable provided by the broadband operator into the WAN interface of the fast wireless router; Then connect the network cable you have prepared, one end to the computer, and the other end to any LAN (1 2 3 4) port on the fast router.

How to install the router when the network cable enters the home to access the Internet.

How to install the router when the network cable enters the home to access the Internet.

Summary: That is, the WAN interface of the router can only be used to connect to the moden, optical modem, or home network cable; PCs can only connect to any of , not to the WAN.

Cell broadband does not need to be dialed, and the landlord can choose to try it automatically. Or set a static or dynamic IP address.

In addition, Swift is no different from TP, Swift is the second-tier brand of TP, and the control interface is the same.

I used to be too, according to the settings, the signal was full, and I couldn't access the Internet, so I changed it to a one-time success.