What should I do if I don t want to remove the tiles in the bathroom and redecorate?

Grinding and refurbishment: For the uneven wear of the one-piece brick, it can be uniformly updated by grinding, but the pattern cannot be retained. Replace partial tiles.

In view of the serious local damage, the tiles that need to be replaced should be broken as much as possible and replaced with tiles of the same color. Therefore, it is recommended to leave a small number of tiles for later restoration. Reinstall the floor tiles for situations that are too worn; Tile adhesive can be used to glue new bricks on top of old bricks.

The old floors caused by pollution, in the family bathroom, can be disposed of without removing porcelain, mainly by cleaning to remove stains.

Grinding and refurbishment: For the uneven wear of the whole brick, it can be evenly updated by sanding, but the pattern cannot be retained; Replace partial tiles. In view of the serious local damage, break the tiles that need to be replaced, and try to replace them with tiles of the same color.

Therefore, it is recommended to leave a small amount of tiles for repair later. Reinstall the floor tiles for situations that are too worn; New bricks can be glued to old bricks with non-detachable tile adhesive; Or smash the sticker. Before renovating the non-removable tiles in your home bathroom, determine the number of non-removable tiles you want to renovate.

If the home bathroom does not have a lot of cracked, hollow tiles, it only needs to be partially renovated. If there is a large area of cracking or hollowing, it needs to be completely renovated. Of course, if you want to change one style of decoration, you also need to change all the tiles in the family bathroom.

At this time, it should be noted that since the walls and floors of the family bathroom are waterproof, it is necessary to avoid damaging the waterproofing when decorating the tiles. If the tile is replaced in a large area, it is best to knock off the original tile, and then do a closed water test to check whether the waterproof is damaged. If the tarp is damaged, it needs to be redone.

It is necessary to re-lay the wall without removing the bricks or after the base ground is treated, you can lay new bricks without removing the bricks. Lay the new tiles directly with cement mortar, and then gently tap the sides and middle with a rubber hammer to avoid hollowing the drum. The mortar stains on the surface of the undismantled tiles should be wiped clean in time to avoid being difficult to clean after drying and curing.

When all the tiles that have not been removed have been laid, the grout can be completed.

If the house is very old and the waterproof performance of the toilet is not good, Bian Xiao still recommends completely dismantling and renovating the toilet. If it's just an overall decoration, the budget will be higher, so how much higher should it be? Let's give a rough estimate of the budget for a 5-square-meter bathroom.

The cost of demolishing the old toilet is about 1,000 yuan, and some artificial materials for water and electricity renovation should be about 1,500 yuan. Because the bathroom is exposed to more water, waterproofing must be done well. I can't save this money, about 1,500 yuan.

The cost of ceramic tiles is relatively large. Within 500-2000 yuan, you can do it according to your own needs. If the aluminum gusset is installed, the cost of the ceiling is about 300-500 yuan.

The bathroom part mainly depends on the budget. If you have a lot of money, you can buy a brand bathroom, which is durable. If you don't have enough budget, you can still buy a regular one.

We should use some detergents to reclean our bathroom, so that there is a feeling of redecoration, and we can and can do it to leak.

If you want to directly do not dismantle the tiles in the bathroom, and then redecorate, then you can on the original basis, for the gaps in the tiles to carry out a beautiful seam, because you do not remove the tiles, only those gaps remain there, and for the bathroom you can change the furnishings inside, and replace them with some more satisfactory decorations.

You can re-glue the tiles on the original tile, of course, the most important issue is to pay attention to the problem of waterproofing.

A new layer of tiles should be applied, and it is enough to paste a new one without knocking out the tiles.

For the bathroom, the original ceiling can be dismantled and redone. Because the ceiling of the bathroom is very simple and the area is very small, it is very simple to dismantle. At this time, we can remove all the ceilings in the bathroom and reinstall the new ceilings.

You can choose the more commonly used integrated ceiling or aluminum gusset ceiling, so that after installation, the ceiling will look new.

Actually, about demolition.

The DU method of bai floor tiles is still relatively simple.

The first thing to do is to pry open the floor tile at the entrance of the gate, inside.

Because the floor tile has one side exposed, it is easier to pry open. Then use a flat chisel to pry in one by one, if the cement mortar is not particularly firm, you can directly use a hammer to pry the flat pry to knock on the gap between the floor tiles and the cement floor.

Gently tap on each side of the brick to find an empty one, break it up, and then pry each tile off one by one from its side (with a flat spatula or other hard metal tool with a flat mouth).

It is easier to ask a professional technician to clean it with an electric pick, remember to be flat!

Professionals generally use electric hammers, which are quick and relatively clean to dismantle.

Here's how:

1. Use a hammer to chisel slowly.

2. Ask a professional decorator to dismantle it.

Use a chisel to chisel slowly, and it is still relatively fast to clean up. Crush it and gently tap the bricks on all sides, find a hollow back, and then pry off each tile one by one from its side (with a flat shovel or other hard metal tools with a flat mouth) can be professionally generally used electric hammer, fast and clean to remove. Professionals use an electric shovel quickly, and it is easier to ask professional technicians to clean it with an electric pickaxe, remember to be flat.

It is fastest with an electric hammer.

Ceramic tile is a kind of acid and alkali resistant porcelain or stone building or decoration material formed by the process of grinding, mixing, pressing, glazing and sintering of refractory metal oxides and semi-metal oxides, which is generally called ceramic tile. Its raw materials are mostly made of clay, quartz sand, etc.

Chisel slowly with a chisel, and it is still relatively quick to clean.

1.Stain cleaning method of glazed tiles:

For glazed bricks, the glaze layer of the ceramic tile surface is a dense substance, colored liquid or dirty things will not penetrate into the brick body, the pollutants of the brick surface can be removed by using a rag dipped in water or adding some washing spirit to wipe the brick surface, if it is a tile with a strong sense of concave and convex, if the uneven gap is squeezed a lot of dust, use a brush brush, and then rinse with clean water to remove the dirt on the brick surface.

2.Vitrified brick dirt cleaning method:

For vitrified tiles, the following corresponding cleaning agents can be used to clean up the contaminants commonly used in the household:

1. Pollution type: daily cleaning.

Cleaning method: You can use a cloth, and then use dish soap and soapy water to clean it.

2. Pollution type: tea, ice cream, oil, beer.

Cleaning method: You can use soda ash solution to clean it.

Cleaning and maintenance of tiles after renovation:

If you do not pay attention to the protection of ceramic tiles when decorating, the surface will leave a variety of stubborn stains such as cement scale, scratches, etc., which are very difficult to clean, and ordinary detergents will not work on these stubborn stains at all. If it is not cleaned properly, it will have serious consequences: some people use hydrochloric acid and oxalic acid to clean, but the result is not only not obvious, but also the brick surface is seriously corroded; Some people use shovels and other tools, but as a result, the brick surface has left scratches that are difficult to repair, and finally have to replace the tiles, wasting a lot of money and time, and causing headaches for many friends.

In fact, these stubborn decoration stains are not terrible, whether it is polished tiles or antique tiles, as long as the correct cleaning agents and methods are used, they can be easily removed.

1. The ordinary dust on the surface of the tile can be cleaned with dish soap, soap, laundry detergent, etc.

2. The wax layer of the polished brick when it leaves the factory can be removed with the shield king full effect decontamination king.

3. The remaining cement scale, caulk, lime, putty powder and other dirt on the surface of the tile can be removed with the shield king descaler.

4. Paints, coatings and other pollutants are dissolved and removed by chemical solvents, such as Tianna water, etc., and paint removers can also be used, such as Sanhe.

5. Black metal scratches, welding marks, etc. can be removed by Shield King Descaling King.

6. Glue hammer prints, imprints of protective materials, shoe prints, watermarks, glue stains, oil stains, and pen prints can be removed by Shield King Full Effect Decontamination King.

7. All kinds of glue can be removed with banana water, pure banana water is a colorless, transparent and volatile liquid, with a strong banana smell, slightly soluble in water, soluble in various organic solvents, flammable, mainly used as a solvent and thinner for painting.

8. Stains on rust, lime scale, gaps and recesses of antique bricks can be removed with Shield King Descaling King.

9. Tea stains, cigarette butt smoked stains, drink stains and other stains can be removed with Shield King Dirt King.

10. The floor tiles will form a layer of dirt after a long time, and the surface looks dark, this stain is relatively stubborn, and it can be removed with a full-effect decontamination king.

11. The fine pores on the surface of the polished tile are exposed, and it is easy to absorb dirt for a long time, making the polished tile difficult to clean, tarnish, and old, and it should be waxed regularly, and the time interval is 2-3 months.

After decoration, there are generally latex paint and other substances in the decoration process on the tiles, and the easiest way is to wipe the ground repeatedly after mixing water with saw foam, and the tile floor will be clean after cleaning.

A small shovel slowly scrapes and towels.

In the renovation of old houses, the renovation of the bathroom is a more problematic part, as the place is usually covered with a lot of tiles. Bathroom tile replacementWe must first remove the original tiles. So, how do you remove tiles from the bathroom?

Before the bathroom officially breaks the bricks, we have to do some preparatory work, including preparing and building electrical construction tools. "Knife sharpening is not stove and lack of wood". Preparing ahead of time can lay the groundwork for the process later.

In the process of toilet renovation, in order to avoid accidental short circuit and electric shock accidents. Temporary energy needs to be converted from the living room to the bathroom. The impact of drilling is an important tool for breaking down walls.

It differs from the traditional steel hammer and hammering method. Construction can be carried out quickly and easily with a percussion drill.

Toilet demolition such as sinks, mirrors, hooks, water heaters, and finally the roof removal. The usual construction equipment structure, which makes it possible to evenly remove bathroom fittings before hitting any brick or brick wall.

Not all hygiene products need to be removed immediately, and restrooms are left unarmed after hitting the bricks. In order to avoid falling into the tile knocking, drainage or dirt damage caused by falling into the drain. However, if you need to keep the toilet, you can use wood or solid materials from a prefabricated structure and place it in the toilet bowl to prevent the tiles from falling.

After removing the bath width room accessories, the wall tiles can be removed. The removal of the base wall is usually a tap from the top to the tap to the inner edge of the tile, and the appropriate tap strength is also selected depending on the extraction location. Knock on the bricks from the bottom of the wall and start taking advantage of the edges of each tile.

If it conforms to the previous tile, the tile accumulates more, the tile wall block, which is not conducive to removal. In addition, it is necessary to clean the tiles on the floor during this process to avoid excessive accumulation of tiles, slowing down the construction progress, and leading to construction accidents.

Since the bathroom of the old house was waterproof before, it was necessary to pay attention to the treatment of the impermeable layer when hitting the bricks. The old waterproofing layer is usually not removed. After breaking the bricks, the original waterproofing layer is thinner. A waterproofing layer needs to be made to improve the waterproofing capacity of the bathroom.

When tapping on the tiles near the socket and faucet, tap gently and carefully observe the direction of the cables and water pipes to avoid damaging the cables and water pipes. If the cable or water pipe is damaged, repair it in time to avoid further work.

The cleanliness of the construction site is very important. As soon as the construction is completed, the work will be cleaned up immediately, which will facilitate the next phase of construction. Cleaning can be done according to the construction conditions or properly during the construction process.

Once the construction is complete, the scattered tiles and cement on the site must be cleaned up, the garbage is packaged in bags and taken to the garbage station for disposal. It cannot be placed on the construction site, which hinders the progress of construction.

The above are the steps to replace the bathroom tiles. It can be said that the replacement of bathroom tiles is not complicated, and Yin Qiaotong only needs to use four simple steps.

You can get it for free

Bathroom is a very important existence, bathroom tiles to re-pipe the first thing to do a good job of the overall wall waterproof, not a fixed height, if there is a problem with the bathroom tiles? How to change the bathroom tiles? In fact, you can find a professional staff to replace it.

In addition, do you know how to choose bathroom tiles and bathroom safety tips? Let me show you!

Because the humidity of the bathroom is usually relatively large, the requirements for ceramic tiles are waterproof, slip-resistant, and wear-resistant. Bathroom floor tiles are generally made of full-body bricks, which have good anti-slip and wear resistance; Bathroom wall tiles are usually glazed tiles, which are glazed with rich color patterns and strong anti-fouling ability.

Toilet safety is a small person to do knowledge: in the widely advocated use of fluoride toothpaste, because fluoride can effectively prevent tooth decay, but not only fluoride toothpaste is good for teeth, because toothpaste contains a large amount of chemicals "sodium lauryl sulfate", which may lead to gastrointestinal diseases and liver toxicity. And it is normal for a family to mix a toothpaste, which seems to be very reasonable, of course a family should share a toothpaste, but now many people will have small dental problems, such as gingivitis, periodontal disease, etc., although it is only a small problem, but when brushing teeth, Zihuai is also very easy to bleed, and everyone sharing a toothpaste may lead to the spread of germs.

Squeezing too much toothpaste when brushing your teeth can also lead to excessive fluoride intake, which can cause gum disease, and severe gum disease may induce heart disease and increase the risk of stroke, osteoporosis and other diseases. Therefore, in the process of using toothpaste, first of all, we should avoid sharing a first balance toothpaste, and secondly, do not squeeze too much toothpaste in the process of brushing, and the frequency of brushing teeth can be controlled three times a day, and you can not brush your teeth frequently.