How to clean the rusty filter screen of the disc trap

Here are some of the well-known brands recognized in the valve industry, which are widely recognized and have a high reputation. While rankings may vary depending on time and market conditions, the following brands are generally considered to be among the top brands in the valve industry:

The following influential first-line brands of water system valves and industrial valves can be used as a reference, but for reference only: Suzhou Neway Valve, Shanghai Guanlong Valve, Shanghai Qizhong Valve, Sanhua, Su Yan, Shentong, Su Valve, Nanfang, Jiang.

First, the word Yao. The above manufacturers are only estimates and references, and the specific situation may vary or fluctuate at any time due to changes in a series of factors such as changes in the market, the size of the competition pattern, and the stability of product quality. As an indispensable key device in industrial production and civil facilities, the quality and reputation of the valve brand directly affect the satisfaction and trust of users.

These brands are known in the valve industry for their innovative technology, high-quality products and reliability. It is important to note that the market and industry are evolving rapidly, and different rankings may vary depending on time and region. For the most up-to-date ranking information, it is recommended to refer to industry reports, professional organizations or market research data for more detailed and accurate information.

It is also convenient to replace the filter.

The filter screen of the disc trap is generally made of stainless steel perforated plates, which usually does not rust to death, and the cost is only a few cents.

It is very convenient to clean the filter screen, remove the filter screen screw plug to take out the filter screen, clean it and reload it, pay attention to check whether the screw plug seal is damaged.

The material of the filter is very fine, so it is best not to use acid clear, you can consider using a special kitchen cleaning liquid or a strong pressure dispersed water flow cleaning.

There are three types of traps: The first type is the machine type, which is similar to the float inside the toilet bowl, when the steam meets the condensate, the float is pushed up, the flap is opened, and the condensate is carried away by the steam pressure. 2 Speed susceptibility type is a Y-shaped type, mainly when storing water to the neck position, the steam pressure is used to push the top plate away, and the water is taken away at this time. When the top disc is warmed and lowered, the flap closes.

3 Temperature susceptibility The third type is very similar to the second type, but the pores are closed to the steel ball, and when there is a lot of moisture, the steel ball is pushed away to drain the water.

But don't waste this precious condensate, if you go to the boiler, you can save energy, for every 6 degrees of improvement, you can save 1%. is a good way to do it.

Traps are used in steam lines to separate water formed due to steam condensation. Water in the steam line can obstruct the flow of steam.

Remove rust from clothing.

1.Wipe the stain with a 15% acetic acid solution (15% tartaric acid solution is also acceptable), or soak the stained part in the solution, and rinse it with water the next day.

2.Moisten the stain with 10% citric acid solution or 10% oxalic acid solution, then soak it in concentrated salt water, wash and rinse the next day.

3.If white cotton and cotton blended fabrics are stained with rust, take a small grain of oxalic acid (available in pharmacies) and put it on the stain, drip some warm water, rub it gently, and then rinse it with water. Pay attention to the operation to be fast and avoid corrosion.

4.The easiest way: If you have fresh lemon, you can squeeze out its juice and drop it on the rust stain and rub it by hand, repeat several times until the rust stain is removed, and then wash it with soapy water. Or soak the rusty area with boiling water, coat it with sour milk, and then apply soap, or wash it clean.

5. Vitamin C tablets are crushed, put on wet clothes (with rust stains), and wash them after soaking to remove rust.

Rust can be cleaned with laundry detergent, and the magic laundry detergent can be washed, I washed it last time.

After the clothes are stained with iron, they can be washed with 2 oxalic acid solution in about 50 warm water to remove, and then rinsed with water. After grinding 3 or 4 vitamin C tablets into powder, sprinkle on the stain of soaked clothes, and then scrub with water several times to remove rust stains. If it is rust stains, you can use 10 oxalic acid, citric acid and water mixture to soak the rust area, and then soak it in concentrated salt water, and wash it after 1 day.

with oxalic acid. Put a little oxalic acid on the rust stains of dry clothes, and then add a little water to scrub it off to wash it off. Remember to also use soap under rust laundry (neutralization). Oxalic acid can also be melted before washing. Beware of fading of clothing.

Sells well because it's cheap.

It should be eliminated because its air leakage is more serious. Draining water is leaking at the same time.

The price of steam leaked in a year is estimated to buy several imported traps.

Disc traps have a simple structure, low manufacturing cost and easy to imitate, so many manufacturers have launched shoddy manufacturing and compete for the market with low prices, which has caused many users to suffer from it. However, the practicability of disc traps is high, and although it has been more than five years since the authorities issued an immediate phase-out order, users still prefer disc traps.

However, users should still be reminded not to buy inferior disc traps, including other traps.

Clothes are difficult to clean with rust stains, so wash them in this way and remove them in minutes.

Go to the supermarket to buy a bag of dirty chicken, use it according to the package and use it, and you can remove the rust at one time.

2 packs for one dollar.

Pour some white vinegar on the spots, wash them a few times and wash them off.

Scrub it clean with a steel wool ball first, put the pot on the stove to dry, pour in a small amount of cooking oil, turn the pot by hand to evenly cover the surface of the pot, bake until it smokes, and repeat many times. In this way, the treated pot is not easy to rust.

When choosing an iron pot, you should pay attention to the following points.

1. The pot surface strives to be smooth, but it cannot be required to be "smooth as a mirror", due to the casting process, the iron pot has irregular shallow lines, which is not a problem. 2. Check whether there are any defects. There are two main types of defects: small bumps and small pits, and the raised part of the small bump is generally iron, which has little impact on the quality of the pot.

If the bulge is on the concave side of the pot, you can grind it off with a grinding wheel to avoid blocking it.

Rub with orange peel dipped in oil.

If it's serious, you can throw it away

Don't be in a hurry to use the iron pot if it is rusty, the chef of the hotel taught me a new way to open the pot, and any iron pot can be used!

Disc traps are valves used in steam pipe networks and equipment to automatically discharge condensate, air and other non-condensable gases, and to prevent steam leakage.

Purpose: Traps are used in steam lines to separate water formed due to steam condensation. Water in the steam line can obstruct the flow of steam.

As the name suggests, it is used for drainage.

That is, to accelerate the delivery of water.

Butterfly valve series Ball valve series.

Corrosion-resistant series.

Discharge valve series.

Gate valve series Globe valve series.

Control valve series.

Safety valve series.

Pressure Reducing Valve Series Wheel Wheel.

Trap series wax spikes.

Filter series.

The hydraulic core has no control valves.

Check valve series.