Why are the Bluetooth headsets connected to two first, and there is no sound when listening to one?

Because it comes with a stereo effect!

Is the Bluetooth headset out of power.

Both Bluetooth headphones are connected, but only one sound can be heard.

Hello dear, the two Bluetooth headsets are connected, but only one sound can be heard First of all, check whether it is the audio source used or the Bluetooth failure of the device; If the true wireless earbuds only have one side of the sound, it is likely that the two earbuds are disconnected, do not pair with the device after turning on the earbuds, and put the two earbuds together and wait for the pairing to complete. The following are the detailed steps: 1. It may be caused by your current audio source, try to switch to a different audio source, or connect to a different device, use the elimination method to check it; 2. If you are using true wireless earbuds, it may be caused by the disconnection between your two earphones, you can open the two earphones together, and then enter the Bluetooth pairing mode, but do not connect with the mobile phone, wait a while for the two earphones will be reconnected, so that you can output audio for both; This situation is caused by the disconnection between the two Bluetooth headsets, and it can be paired with the mobile phone after the normal connection.

Why do I have 2 connections for bluetooth headphones, the connection for both is successful but only one earphone has sound.

1. It should be set to monoral mode, and it can be switched to binaural mode. 2. Step 1: Restore the earphones to factory settings, press and hold the function button at the same time as the 2 earphones are turned on, do not release the power on indicator light and continue to press for about 10-20 seconds before releasing (don't let go in advance, it is very important) 3. Step 2:

Put the earphones into the charging compartment, press the power supply of the charging compartment (both earphones are red to pick up the earphones) 4, step 3: turn on and press and hold for seconds, the light will be on (the earphone voice prompt "power on") will be released immediately, and the phone can search for n1 and click the link. (The N1 of the single ear pairing mode that starts to connect ignores this device first, if you can't tell which is the N1 of the single ear mode, then both N1 will ignore this device and search for the N1 connection again) 5. Note:

Don't press it for too long when you turn it on, it will enter the one-ear pairing mode if you press it for too long.

Turning on the Monaural mode will cause only one side of the earbuds to have sound, and you can solve the problem by resuming the binaural mode here:

1. Put the left and right earphones into the charging compartment at the same time.

2. When the indicator light on the earphones is on, press and hold the function keys of the left and right earphones at the same time for 10 seconds.

3. After the red light flashes twice on the left and right earphones, take out the earphones.

4. You can see the earphone indicator flashing, and the binaural mode of the earphone will be restored.

Bluetooth headset two are connected at the same time, only one has a sound, why?

Bluetooth headsets are connected to both but only one can only ring, what is the reason Hello dear, check whether it is the audio source used or the Bluetooth failure of the device is caused by hail; If the earphones are only single-sided, it is likely that the two earphones are disconnected, do not pair with the device after turning on the earphones, and put the two earphones together and wait for the pairing to be completed. The following is a detailed introduction: 1. It may be caused by your current audio source, try to switch to a different audio source, or connect to a different device, use the elimination method to check it; 2. If you are using true wireless earbuds, it may be caused by the disconnection between your two earphones, you can open the two earphones together, and then enter the Bluetooth pairing mode, but do not connect with the mobile phone, wait a while for the two earphones will be reconnected, so that you can output both audio sources to talk; This situation is caused by the disconnection between the two Bluetooth headsets, and it can be paired with the mobile phone after the normal connection.

Hope mine is helpful to you, thank you and have a great day!

Summary. 1. It may be caused by your current audio source, try to switch to another audio source, or connect to a different device, use the elimination method to check it;

2. If you are using true wireless earbuds, it may be caused by the disconnection between your two earphones, you can open the two earphones together, and then enter the Bluetooth pairing mode, but do not connect with the mobile phone, wait a while for the two earphones will be reconnected, so that you can output audio for both; This situation is caused by the disconnection between the two Bluetooth headsets, and it can be paired with the mobile phone after the normal connection.

Bluetooth headset two are connected at the same time, only one has a sound, why?

Dear, hello, 1, it may be caused by your current audio source, try to cut the Zen hidden sale to other audio sources, or connect to a different device, use the elimination method to check it; 2. If you are using true wireless earphones, it may be caused by the disconnection between your two earphones, you can open the two earphones together, and then enter the Bluetooth pairing mode, but do not connect with the mobile phone, wait a while for the two earphones will be reconnected, so that you can carry the balance of both to output audio; This situation is caused by the disconnection between the two Bluetooth headsets, and it can be paired with the mobile phone after the normal connection.

It's also possible that it's broken.

1. One of the earphones is running out of battery.

The first possibility is that one of our Bluetooth headphones is running out of battery, causing the connection to drop. If this happens, we can charge the Bluetooth headset for a while and try to reconnect it.

2. The bluetooth headset is not paired.

The second possibility is that our Bluetooth headphones have not completed the pairing of the two earphones, resulting in one successful connection and the other not yet connected.

If this is the case, we can restart the Bluetooth headset to re-pair it.

3. Subject to signal interference.

The third possibility is that we use Bluetooth headsets in an environment with signal interference, which causes the Bluetooth signal to be interfered with and cannot be connected normally.

4. Earphone damage.

The fourth possibility is that our Bluetooth headphones have been damaged, such as being immersed in water, etc. If this is the case, we can go to a physical store to have it repaired.

This means that your bluetooth headset is equipped with the back, the general original bluetooth headset will not appear two Bluetooth signals, both are the same Bluetooth signal, if there are two Bluetooth signal sources, it means that your headset is equipped with the back, not the original.

Bluetooth headset two earphones, if only one has sound, that is, one earphone is broken, at this time you need to repair it yourself.

Bluetooth headset, maybe at the beginning has been connected to one ear, the other earphone is not on, so only one has sound.

Check if the other one is out of power, another is whether the other earphone line is normal, and another is to check if the switch of the other one is on.

It may be caused by your current audio source, try switching to a different audio source, or connect to a different device

It's impossible, there should be a sound.

Summary. Hello yo dear, I will help you solve this problem The specific solution is as follows:

2.You can turn off the connection between the mobile phone and the earphones first, delete the Bluetooth earphones in the Bluetooth list of the mobile phone at the same time, turn on the Bluetooth matching of the two earphones, and then press the earphones on both sides a few times until the two earphones send a connection prompt;

3.If none of the above methods can solve the problem, it is likely to be caused by damage to the Bluetooth headset;

For example, the headset hardware is damaged, or it is not charged! In this case, it is recommended to go to the after-sales service!

Hope it helps!

Bluetooth headphones are connected to both, but only one can only ring, what is the reason?

Hello yo dear, I will help you solve this problem The specific solution is as follows: both Bluetooth headsets are connected to the front but only one can ring Reason: 1

The problem with the audio itself, change the headphones or change the **** to see if it is the same; 2.You can turn off the connection between the mobile phone and the earphones first, delete the Bluetooth earphones in the Bluetooth list of the mobile phone at the same time, turn on the Bluetooth matching of the two earphones, and then press the earphones on both sides a few times until the two earphones send a connection prompt; 3.If none of the above methods can be solved, it is likely that the Bluetooth headset is damaged and caused by deficiency; For example, the headset hardware is damaged, or it is not charged!

In this case, it is recommended to go to the after-sales service! Hope it helps!

Both are connected, either the right one or the left one.

What's with. Wait a minute, God. Typing to sort out the reply.

You've been waiting for a long time. That could be an audio issue.

to create a "ear pushing" feeling and give you a novel experience!

Bluetooth headsets are connected to both but only one can only ring, what is the reason Hello dear, check whether it is the audio source used or the Bluetooth failure of the device is caused by hail; If the earphones are only single-sided, it is likely that the two earphones are disconnected, do not pair with the device after turning on the earphones, and put the two earphones together and wait for the pairing to be completed. The following is a detailed introduction: 1. It may be caused by your current audio source, try to switch to a different audio source, or connect to a different device, use the elimination method to check it; 2. If you are using true wireless earbuds, it may be caused by the disconnection between your two earphones, you can open the two earphones together, and then enter the Bluetooth pairing mode, but do not connect with the mobile phone, wait a while for the two earphones will be reconnected, so that you can output both audio sources to talk; This situation is caused by the disconnection between the two Bluetooth headsets, and it can be paired with the mobile phone after the normal connection.

Hope mine is helpful to you, thank you and have a great day!