When washing clothes, the sewer does not reflect the water, and the foam is always reversed 5

The foam is very lightweight.

The foam of the laundry detergent is very light, and the gravity of pouring water into the sewer together will cause reaction, and the foam will not go down, and it will even be pushed up.

Although the sewer pipe is unobstructed, the ventilation is not very good, and the laundry is done if the laundry detergent.

If you put too much foam, these bubbles are not easy to flow and are easy to stick to the pipe wall, and when the tube is filled with foam and continues to drain into it, the foam will be squeezed out of the nozzle.

Anti-foaming is normal, you put too much laundry detergent.

Although the sewer pipe is unobstructed, the ventilation is not very good. If there is too much laundry detergent, there will be a lot of bubbles, which are not easy to flow and are easy to stick to the pipe wall. When the tube is filled with foam, the foam will be squeezed out of the nozzle if you continue to drain the water.

To solve the anti-foam, you can insert the drain hose down and bypass the bottom trap (if there is no trap, you can install one in the above-ground part).

You have too much laundry foam because you put too much laundry detergent and laundry detergent (when you put it properly, the dirt particles happen to be wrapped by the active agent to form a suspension; If you put too much of it, there will be a surplus of active agent, and foam will be formed. Just like shampooing, shampoo with less foam is the same principle. Try to put a little less, not enough to add more.

The reason why the gas can't be discharged.

The bend is too large, and the water pipes and waterways are too crowded. Just be small.

It shows that the water pipe is too large, and the anti-water elbow does not work.

The foam is very lightweight.

The foam of the laundry detergent is very light, and the gravity of the water poured into the sewer will cause the reaction force, and the foam will not go down, and it will even be pushed up.

Although the sewer pipe is unobstructed, but the ventilation is not very good, laundry if the laundry detergent is put too much, there will be a lot of bubbles, these bubbles are not easy to flow, it is easy to stick to the wall of the spring pipe, when the pipe is filled with foam and continue to drain inside, the foam will be squeezed out of the nozzle.

Summary. The biggest reason for the problem of backwater in the sewer pipe is that the pipe has been blocked, resulting in its pipe wall getting thicker and thicker, and it cannot be discharged in time when draining, but will cause the phenomenon of backwater.

The biggest reason for the problem of anti-water in the Shimogaji water pipeline is that the pipeline has been blocked, resulting in its pipe wall becoming thicker and thicker, and it cannot be discharged in time when draining, but will cause the phenomenon of anti-Zen key water.

Most of the backwater in the sewer pipe is due to the bright problem of the blockage of the pipe, so we only need to solve the problem of blockage. After some pipes are used for a long time, there will be a mess of scale, and there are more impurities in it, so the pipes need to be cleaned regularly.

<>1. Physical method: a large amount of water is flushed into a short period of time, such as several large buckets of water. The use of debris to block the drainage is not smooth, and the water accumulates to produce a high water level and wash away the debris.

Or pour in a bucket of water first, and then use the commonly used suction in the toilet to press the drain and pull it in reverse, and use the vacuum pressure to suck away the blockage (the sewer debris blocks the drainage not because it is tightly blocked, but because the card is stuck well, as long as the balance is disrupted and the tremor is dissipated, it will be unblocked).

2. Chemical method: pour the dredging agent into the sewer (generally strong acid or strong alkaline, pay attention to wear gloves to protect your hands), and then pour it into several large buckets of water after about ten minutes, and it can be solved.

In the process of use, the washing machine often encounters the situation of sewer backwater, which not only affects the use effect, but also may cause inconvenience to life. Backwater is most likely a problem inside the sewer that prevents the water from flowing out properly. Let's talk about the reasons for the backlash of the washing machine sewer.

1.Sewer blockage: Sewer blockage is often the main cause. There is a relatively large amount of sewage that cannot be discharged from the sewer. Therefore, if the sewer is clogged, a large amount of sewage will quickly pour into the washing machine, causing the washing machine sewer to backwater back.

2.Unreasonable sewer pipe design: The design of sewer pipes in some residential or residential areas is often unreasonable, resulting in the water flow not flowing smoothly. If the sewer pipe is bent to an intolerable degree, the water is prone to overflow, causing the washing machine sewer to back.

3.Insufficient vertical height of sewer pipes: Some sewer pipes for internal and external transportation are not vertical enough, and the water will not be discharged from the sewer, which will cause the water to flow backwards into the washing machine, causing the sewer to backflow.

4.The interface of the sewer pipe is uneven: if the "invoice" end of the sewer pipe is uneven and the dredging posture is incorrect, it is easy to make the water flow break and cause the water flow to flow backwards. Therefore, the connections of the sewer pipes should be kept flat and free from manufacturing defects or quality issues.

5.The sewage treatment system is not perfect: sometimes the sewage treatment system is not installed with exhaust pipes or there is a lot of sewage in the sewer, which will naturally quickly fill the dirt, which will cause the washing machine sewer to backwater.

To sum up, we can see that there are many reasons for the backwater of washing machine sewers. When this happens, we should check if the sewer is blocked as soon as possible, and if so, clean it up; If that doesn't work, you can find a professional to repair it. In daily life, we should use the washing machine reasonably, do not throw away garbage casually, so as not to pollute the environment, and at the same time can also protect ourselves.

There can be many reasons for the backlash of a washing machine sewer, but here are some of the most common ones:

1.Clogged sewer pipes: When the sewer pipes are clogged, the water can't flow, causing the washing machine sewer to back. This can be caused by excessive dirt, sand, paper scraps, etc., accumulating in the pipes.

2.Poor pipe design: If the washing machine sewer pipe is not properly designed, such as the pipe is too small or bent too much, it will lead to poor drainage, which can lead to backwatering.

3.Insufficient drain height: If the drain is not high enough, it can cause backflow. This is because the water flow will fall into the sewer, but there is not enough gravity to push it downwards and instead flow upwards.

4.Drain pipes are not cleaned: If the sewer pipes are not cleaned frequently, it is easy to accumulate a lot of dirt and garbage, and then the sewer pipes will be clogged and the water will flow out smoothly.

5.Washing machine failure: If the drain pipe or valve of the washing machine is damaged or stuck, it can cause backwatering. In addition, if there is a problem with the washing machine's water level sensor, it can also cause excess water to enter the washing machine, which can lead to backwater.

6.Air pressure problem: When the air pressure inside the other end of the washing machine drain exceeds the air pressure inside the washing machine, the water will flow backwards out of the sewer.

7.Weather factors: During heavy rains or snow storms, excessive rainfall can cause sewers and drains to become clogged, leading to backwatering.