What to do if the Apple computer is too quiet, and the Apple computer is too quiet

First, first confirm that the hardware is fine. If the speaker is fine, the sound card is fine, and if you've tested it on other machines and it's really good, then you can read on.

2. Make sure all the cables are exactly right. Then power on the speaker and turn on the volume switch.

3. Install the driver of the sound card correctly, if it is an onboard sound card, it is best to install the driver provided on the driver disk of the motherboard.

In fact, the computer does not make a sound, and many times it is because the sound card is not driven correctly. In general, after the sound card driver is installed, there will be a small speaker icon in the taskbar in the lower right corner. ）

Fourth, if you are sure that the driver is installed correctly, then take a look at the volume settings in the computer.

The specific method is to double-click the speaker icon in the taskbar, and check whether the volume is turned off to the minimum in the "Volume Control" and "Waveform" dialog box in the pop-up "Volume Control" and "Waveform".

If these two options are not available in the dialog box, click on the "Options" menu - select "Properties" - select "Volume Control" and "Waveform" in the "Show Volume Controls" and then set them correctly.

Note: Step 4 can only be set up after the driver for the sound card has been installed correctly.

What to do if the laptop is too quiet.

What should I do if the voice of the apple notebook is small.

1.The first method is to use the volume adjustment button in the upper toolbar to adjust the volume of the Mac, and we can drag it up and down to meet our own needs for volume.

2.In the second way, we can use F11 and F12 and F10 on the keyboard to control the volume through shortcuts. F10 is muted, F11 is volume reduction, and F12 is volume expansion.

3.This brings us to the second question, how to adjust the volume accurately, when we hold down option-shift when we use the shortcut key to adjust the volume, do we find that we change the value of 1 4 when adjusting the volume.

4.The third method is that we can adjust the volume of the computer through external devices, and when we use headphones that match the MAC, we can adjust the volume of the computer through the numerical control panel of the headphones.

5.In the last method, we can adjust the volume very precisely through third-party control software, just like the effect of installing a plug-in after jailbreaking the iPhone.

2.How to tune the sound of Apple computers.

The specific steps are as follows:

The materials that need to be prepared for grinding are: computer,

1. First turn on the computer and click to open the "Settings" icon option.

2. Then click on the "Keyboard" option in that page.

3. After that, click and check the "Use F1, F2 and other keys as standard function keys" option on this page, and then you can use the F1 and F2 buttons to adjust the volume.

3.How to set the sound of the Apple computer system.

1. First of all, a relatively simple one is that we directly use the f10, f11, and f12 on the keyboard to represent mute, volume reduction, and volume increase, respectively. We can control the volume directly with the shortcut keys. When using the shortcut keys, you will see a prompt in the middle of the screen in Blind Friends.

2. The second point is that we can adjust the volume through the settings. We need to find the launchpad and then the system settings.

3. Open it after finding System Preferences, and then we need to find the sound settings again. In the sound settings we can adjust the sound directly. Just drag the mouse or click on it.

4. Then there is another point that we can adjust through the settings shortcut bar at the top edge of the computer screen. The way to do this is to call up this button first. We can continue with the above steps and pay attention to the following option of the volume line: Show volume in the menu bar. Tick it.

5. The last point is that we can adjust it through external speakers. Through the external speaker, we can directly adjust the volume level, which is also a good way.

Taking Apple iMac and macOSX systems as examples, the specific operation methods are as follows:

Method 1: Find and tap the F12 key above the keyboard of your computer to increase the volume.

Method 2: 1. Find the launchpad on your desktop and click to open it.

2. After opening the launchpad, find the system settings;

3. Find the "System Preferences" option in the system settings and click to open it;

4. Find the sound settings in it. In the sound settings, you can directly use the mouse click and drag the volume bar to adjust the computer sound.

In addition, assuming that the user is using the computer and has an additional external speaker connected, then the volume of the computer can be adjusted by manually adjusting the volume of the external speaker.

If you find that the volume is too low when listening**or watching**, you can adjust the sound of the computer itself at the same time, and increase the volume on **software or **software. If you find that there is no sound in the process of using **, you can check whether the browser is set to mute, and you can turn up the voice of the browser appropriately.

It's important to note that this answer applies to most of Apple's computer models.

How to adjust the sound of Apple computer if it is too small: 1. Adjust directly on the keyboard: the F11 and F12 buttons in the upper right corner of the keyboard are the volume adjustment buttons, press F11 to turn down the volume, and F12 to increase the volume;

2. Adjust in the sound settings of System Preferences: After entering the system, click the Apple icon in the upper left corner, System Preferences, Sound, select Output, in the output volume below, slide the button to the right to increase the volume, and to the left to decrease the volume.

Adjust directly on the keyboard, F11, F12 buttons are volume adjustment buttons, press F11 to turn down the volume, F12 to increase the volume; You can also adjust it in the [Sound Settings] of System Preferences, go to [System Preferences] - [Sound], select [Output], and in the [Output Volume] below, you can slide the buttons left and right to adjust.

The configuration remains the same, the functions remain the same, the body becomes thinner, and the weight becomes lighter, so that such a laptop can truly embody the so-called "notebook" feeling.

The report pointed out that with the continuous improvement of technology in the laptop industry and the advent of the second-generation Sandybridge processor, today's 8 12-inch screen laptops have tended to be like simple laptops.

It is tending to be the balance between performance, performance and portability. Ultra-thin laptops are not inferior to larger laptops in terms of performance, whether it is the processor, memory, or major accessories such as hard drives. <>

Of course, it is not impossible to talk about the differences, the most obvious is that the general ultra-thin laptop does not use high-end configurations due to volume, heat dissipation, memory and other reasons, and the volume of the battery also determines the relationship between performance and battery life to a certain extent.

Thin and light netbooks generally do not use built-in optical drives and network cable interfaces (some computers do not have numeric keypads). Wireless local area network (WLAN), Bluetooth and other functions have long been commonplace, and the size is equally lightweight.

However, high configuration is not without a price, I believe everyone understands, such a high-configuration ultra-thin laptop is not necessarily amiable.

The specific steps to adjust the volume of your Apple computer are as follows:1. First turn on the computer, enter the desktop of the computer, and click to open the "System Preferences" in the launchpad.

2. Then click on the pop-up window to open the "Sound" option.

3. Then in the pop-up window, click the left mouse button on the drag bar after the output volume, and drag left and right to adjust.

If the sound of an Apple laptop is too small, you can connect an external speaker to enhance the sound, which is generally used in this way.

My apple tablet is too quiet, how can I turn it up.

Dear, hello, I'm glad to answer for you: The sound of my apple tablet is too small, how can I turn it up and kiss loudly The method is as follows: press the volume up and down keys on the right side of the ipad or swipe up from the bottom of the screen to call out the control center, and slide up and down in the volume bar to adjust, bringing you how to adjust the volume of the ipad.

Method 2: Press the volume plus or minus button on the right side of the iPad to adjust the volume2. Press the "Settings" icon on the home screen, and tap "General" in the "Settings" list on the left; 3. Tap the "Sound" option in the "General" list on the right, and in the "Sound" list that appears, drag the volume circle slider to adjust the volume; 4. Tap on the buttons behind the 5 options of "New Email Receiving", "Send Email", "Calendar Reminder", "Lock Sound" and "Key Tone" to turn the sound effect on or off.

Even if there is no sound, you can't adjust the solution:

If there is no sound on your Mac at this time, and you can't adjust the volume, there is a problem with the system sound settings. Please open the System Preferences app first;

Tap in Preferences to open the "Sound" settings option;

Next, click on the "Output" column in the sound settings window;

Then please check whether there are more than one sound output devices, for example, there is an external HDMI monitor here, which can output sound. If you have more than one output device on your Mac, select the "Built-in Speakers" section, which is the speaker that comes with your Mac.

Try adjusting the volume again and it should be back to normal.

There is a sound but the volume cannot be adjusted:

If the current Mac has sound, but you can't adjust the volume, it should be a software fault of the system and you need to restart it to recover.