Measuring the size of the ring, why do some have Hong Kong and some have Meidu?

The ring size we often hear is Meidu and Hong Kong, and in China, for example, Chow Tai Fook's jewelry store to measure the ring size is generally Meidu, and to go to a store like Mabel to measure the ring size is Hong Kong. When you go to Hong Kong, the size of the measurement is generally in Hong Kong. The general size of the port is 7 to 20, and the corresponding size of the Mido is ,,,5,,6,,,8,,9.

Mido * Hong Kong, this is just an approximate conversion ratio, you can go to MBLIFE's ** to find a way to measure the size of the ring, if you want to know a very accurate ring size, then go to the nearest jewelry store to measure.

Different countries and regions may have different standards and customs when measuring ring size, so different representations such as port and beauty will appear.

Hong Kong is a commonly used method of expressing ring size in Hong Kong, China, and its standard size range is usually 7 to 20, and the corresponding Mido size range is .5 and 9.

Mido, on the other hand, is a commonly used way to indicate ring size internationally, and its standard size range is usually 4 to 11.

Therefore, when choosing a ring, you need to choose the appropriate representation method according to your region and habits in order to choose the right ring size.

The ring size that I often hear about is Meidu and Hong Kong, and the ring size in domestic jewelry stores is generally Meidu, and the ring size is measured in stores like Mabel. When you go to Hong Kong, the size of the measurement is generally in Hong Kong.

The general size of the port is 7 to 20, and the corresponding size of the Mido is ,,,5,,6,,,8,,9. Mido* Harbor.

The comparison table of the size of the rings of each country can be correspondingly taken a look.

This is just an approximate conversion ratio, you can go to MBLIFE's ** to find a way to measure the size of the ring, if you want to know a very accurate ring size, then go to the nearest jewelry store to measure.

Extended information: 1. Make a finger measuring device:

1. Prepare a sheet of A4 paper to print this page;

2. Crop the quick filter to the outer border, note: the cut-out place also needs to be trimmed.

3. Wrap the filter around your finger and pass the arrow through the clipping, and the corresponding scale is the number of your finger rings.

4. The pure wide description method can determine your finger number to be within two numbers, but if you have measured the finger circle, you should be able to know your hand size at this time. Here's a more precise way to do it.

5. Print the following circles, and find your corresponding hand size to cut, and then put the cut circle on a piece of hard box paper, carry out the last production process, and carry out the hard box paper according to the circle.

6. After cutting, a self-made finger measuring device is completed.

2. Precautions:

1. After putting on the ring filter, make sure it slides smoothly over the finger joints.

2. Don't measure your finger when the weather is too cold, and do it because the model of your finger is the smallest at this time.

3. If you want to get a more exact size, you can measure it at the end of the day, because the size of your finger is the largest at this time.

4. Generally, the ring is worn on the index finger, middle finger or ring finger, and most girls wear rings with the number of 10-15, including 12 and 13;Most boys wear rings numbered 17-22, with more of them numbering 18-20.

5. Adjust your number appropriately according to different seasons, buy rings in winter, due to the colder weather, fingers are thinner than in summer one to one and a half size, the ring can be rotated left and right after being brought but not easy to fall off, and it is appropriate to feel slightly tighter after bringing it in summer. If it feels too loose after wearing the ring, you can wrap a few thin or silk threads around the inside of the ring, and if it is too tight, you can apply soapy water to your finger so that you can put it on or take off smoothly.

Summary. The ring size we often hear is Meidu and Hong Kong, and the ring size in domestic jewelry stores is generally Meidu, and the ring size is measured in stores like Mabel. When you go to Hong Kong, the size of the measurement is generally in Hong Kong.

The general size of the port is 7 to 20, and the corresponding size of the Mido is ,,,5,,6,,,8,,9. Mido* Harbor.

The size of the ring, how to convert the port and the United States.

We often hear that the size of the ring is Meidu and Hong Kong, and the size of the ring in the domestic jewelry store is generally Meidu, and the size of the ring in a store like Mabel is the Hong Kong Dou Ant liquid. When you go to Hong Kong, the size of the measurement is generally in Hong Kong. The general size of the port is 7 to 20, and the size of the corresponding US ,,,is 5,,6,,,8,,9 of the empty objects.

Mido* Harbor.

I will send you a comparison table of ring sizes in various countries, and you can take a look at it. 、

First, the difference is mainly that the expression method is different, the comparison table between Yingdu and Hong Kong:

1. Ring size comparison table (UK size).

Number - Inner ring length - Inner diameter.

j1/2——

i1/2——

o——q——

s——t1/2——

v1/2——

y1/2——

2. Hong Kong wedding ring size comparison table (Hong Kong size).

Number - Inner ring length - Inner diameter.

2. General ring size measurement method:

1. First use the silk thread around the finger, then cut the silk thread and straighten it, measure the length of the silk thread with a ruler, and then compare it with the table, for example, the length of the silk thread around the finger is 53mm, then the finger size is 12.

2. Directly take the appropriate ring and measure the inner diameter of the ring to determine the size according to the size below. Note: It is the inner diameter, which does not include the thickness of the ring. For example, if the measured inner diameter is 17mm, the hand size is 13.

3. If it is convenient, you can also go directly to the jewelry store to measure the size directly.

Diamond ring hand size Hong Kong degree 17 US is an inch.

The ring size that is often heard is Midu and Hong Kong, and the ring size in domestic jewelry stores is generally Mido, and the ring size is measured in stores like Mabel. When you go to Hong Kong, the size of the measurement is generally in Hong Kong.

The general size of the port is 7 to 20.

The size corresponding to the US is ,,,5,,6,,,8,,9. Mido* Harbor. American size Circumference (mm) 57 corresponds to 17 port