-
Anonymous users2024-02-12To put it simply, the difference between the large bend, the middle bend and the straight bend of the damping hinge is shown in the figure below, but many people who come into contact for the first time actually can't understand it, so I will explain it to you in detail today.
Full cover (straight bend):
Semi-shaded (mid-curved):
Typically, two doors share a side panel. There is a minimum clearance required between them. Generally, it is used to open the door left and right, and when the door is closed, you can see half of the side panels. The coverage distance of each door is correspondingly reduced, and hinges with curved arms are required. See Figure 2
Built-in (Big Bend):
The big bend is also called recessed, or uncovered, and the side panels can be seen when the door is closed. In this case, the door is located inside the cabinet, next to the cabinet side panels. It also needs a gap so that the door can open smoothly. Hinges with very curved hinges are required. See Figure 3
The above is the difference between the large bend, medium bend and straight bend of the damping hinge and the actual position of the cabinet door after installation.
-
Anonymous users2024-02-11Summary. 1. The large curved hinge is uncovered, usually hidden in the cabinet door, and should be flush with the side panel.
2. The middle bend hinge is a half cover, the cabinet door can cover one side centimeter, and the two cabinet doors need to use the same side panel.
What is the difference between a medium bend hinge and a large bend hinge?
1. The big bent hinge is without a cover, usually hidden in the cabinet door, and the finger fight should be quietly suspected and flush with the side only Yunxiang board. 2. The middle bend hinge is a half cover, the cabinet door can cover one side centimeter, and the two cabinet doors need to use the same side panel.
The above is the difference between a medium bend hinge and a large bend hinge for your reference.
-
Anonymous users2024-02-10To put it simply, the difference between the damping hinge bend, the middle bend, and the straight bend is shown in the figure below, but many people who are in contact for the first time actually can't understand it.
Full cover (straight bend):
Semi-shaded (mid-curved):
Typically, two doors share a side panel. There is a minimum clearance required between them. Generally, it is used to open the door left and right, and when the door is closed, you can see half of the side panels. The distance between the covers of each door is correspondingly reduced, and hinges with curved arms are required. See Figure 2
Built-in (Big Bend):
The big bend is also called recessed, or uncovered, and the side panels can be seen when the door is closed. In this case, the door is located inside the cabinet, next to the cabinet side panels. It also needs a gap so that the door can open smoothly. Hinges with very curved hinges are required. See Figure 3
The above is the difference between the large bend, medium bend and straight bend of the damping hinge and the real core laughing position of the cabinet door after installation.
-
Anonymous users2024-02-09It is said that the connecting arm does not have a hinge with a curved arc, so it is also called a straight bend or straight arm, and the use of this hinge indicates that the cabinet door can completely cover the side panel after the door is closed, which will not affect the overall appearance, and it will normally be used on the door fixing of the two-end cabinet.
What is the difference between a mid-bend and a large bend and a straight bend?
They differ in their appearance and size, but the functionality is the same. The big bend is no cover, usually hidden in the cabinet door, to be flush with the side panel, the middle bend is a half cover, the cabinet door can cover one side of it centimeters, and the two cabinet doors need to use the same side panel, the straight bend is the full cover, the thickness of the general woodworking board is centimeters, can cover the side panels.
What are the common hinge categories?
1. The most common thing in ordinary home decoration furniture is ordinary hinge, and it is widely used, but this kind of hinge does not have the ability of spring hinges, so it cannot be used in many places.
2. Pipe hinge, it is a kind of spring hinge, that is, a spring is added in the middle of the hinge, which can be more convenient to control the switch of door and window furniture, it is made of galvanized iron and zinc alloy, which can usually adjust the height and arc around it, and can also judge the opening angle according to the area of the room.
3. The door hinge, it is generally used in the connection and rotation of the door leaf and the door frame, and the material of this hinge is many, there are copper, and stainless steel, compared with the other two types of hinge, its load-bearing performance is better, and the service life is also long.
What are the tips for buying hinges?
1. When buying, you can choose a hinge, carry it out horizontally, observe his process, the hinges are slowly sliding down, so that it is relatively simple to close, and will not hit the door frame, if it is difficult or all at once, it means that the quality is poor.
2. In checking the material of the surface of the hinge, whether the surface of the flat key has scratches or deformations, it means that the quality is not up to standard, you can take a knife to scratch on the surface, if there are water-stained items, it means that the plating layer is very thin or there is no trembling chain electroplating at all, and the quality is not up to standard.
-
Anonymous users2024-02-08Summary. Hinge middle bend, big bend, small bend, straight bend, middle bend, large bend hinge is an ordinary hinge, open and close without a cushioning effect, if you need a cushioning effect, you need to be equipped with a damper. The main specifications are 3*3*, 4*4* and so on.
Hinge bend in the big bend, small bend diagram banquet hand straightening bend, change the middle bend, large bend hinge is an ordinary hinge, open and close does not have a cushioning effect, if you need a cushioning effect, you need to be equipped with a damper. The main specifications are 3*3*晌晌愛虌愛, 4*4*, and so on.
How many FCLS?
How much does it cost?
Hinge is generally about 30 yuan, and if you need to buy a better one, it is not expensive about 60 yuan.
Hard sleeper: two rows of bunks on the left and right, divided into three floors, there is a ladder for passengers to go up and down by the corridor, the top floor is more troublesome to climb, the space from the top is very small, and for the first time to sleep on the upper bunk will be a little afraid of heights, even if there is a guardrail, it is difficult to eliminate the worry of falling out of bed while sleeping. There is a luggage rack on the top of the corridor outside, which is basically not enough, and the small private room has its own bed position, and the large luggage is placed under the lower bunk bed, and the conventional suitcase can be put down. >>>More
1. The taste is different
Bananas have a rich aroma and a sweet taste, but the taste of plantain is different, and when you eat it, it tastes sweet, but after eating it, a sour taste appears. >>>More
1. The program is different.
Whale. It is a completely aquatic mammal. >>>More
1. The two are a pair of inverted words.
In many cases, there is no distinction meaning, but if it is necessary to distinguish the use, it means that the person who wants to distinguish wants to "focus differently", that is, according to the 8 2 principle, focus on the previous word. >>>More
Knowing is a divergent structure, and knowing that Q&A is a convergent structure. Theoretically, the questions you throw into know can be seen by anyone, but not in Zhihu Q&A. If seeking answers is sometimes like looking for a needle in a haystack, the possibility of finding it in knowledge is greater than that of Zhihu Q&A. >>>More