If you want to change the 17 inch wheels for the horse 6, is it not good for the car?

After changing the 17, you will feel that the distance between the tire and the body increases, it is recommended to replace the short spring, reduce the body, and the cost is about 1000. The 17-inch will also have this problem, but it is not very obvious if the speed is not fast. The power of the Ma Six is enough to match the 17-inch circle, and the tires can be selected in a variety of ways, 2054517 or 2154517 or 2254517, etc., generally I recommend replacing the 215.

Lap remember to focus on high strength and light weight, don't be greedy for cheap, buy counterfeit products, the lap will directly affect the driving stability, rather shortage.

Don't rot! The replacement of the spring can lower the body, causing a feeling of lying on the ground, not to replace it, I don't think I plan to overhaul it, there is no need to replace, if you want to change it, you can directly suspend the suit, don't just change the spring. Generally, there is no special need to change 17 on the line, 18 is a little better.

You don't need to change the vibration damping, if you want to change it, change it to grit your teeth, the height is adjustable, the performance is good, but it is relatively hard and not comfortable, and it is expensive. The tires depend on what kind of wheels you are changing, some are equipped with wide tires, or ordinary wide tires.

It won't have a big impact on the vehicle·· It's just that the fuel consumption is large·· The cost of changing a tire is high... The brake is ready... Which wheel is good-looking will see people's wisdom·· Please give it points.

MazdaHorse 6 cornersThe Little PrinceSixteen-inch wheels cannot be exchanged for eighteen inches. The policy clearly stipulates that it is not allowed to replace the wheels that are not the original car size, and the 16-inch wheels are replaced with 18-inch wheels.

It is not for the record, and can not pass the annual inspection, Liangxiao wheel hub is the part of the center of the wheel, the center is installed on the axle, playing the role of supporting the tire, the shape is cylindrical, and the bearing is generally installed to avoid friction.

Precautions

The wheel hub should be cleaned frequently, so as to avoid the corrosion of the aluminum surface by salt, if necessary, after cleaning, the wheel hub can be waxed and maintained to keep it shiny, when the temperature of the wheel hub is high, it should be allowed to cool naturally before cleaning.

Retrofitting large wheels can lead to increased tire noise and fuel consumption, which can increase wear and tear on the vehicle. It is recommended that the modified wheels should be reasonably increased in size according to their own needs, and the modified wheels should not span too large, directly modified from 16 inches to 18 inches, because to maintain the circumference of the tire as much as possible, it is necessary to choose tires with a lower flat ratio, which will reduce the comfort of the vehicle.

The 16-inch wheels changed to the 17-inch wheels have an impact on Li before the demolition

1. As long as the appearance of the vehicle is inconsistent with the driving license, it is illegal and will affect the annual inspection. In accordance with the relevant provisions of the current Motor Vehicle Registration Regulations;

2. To change the body color, model, performance, use and road structure of the licensed motor vehicle, and to replace the frame, body or engine, the owner must apply to the vehicle management office to change the registration of Yuxun;

3. Installing a rear wing, enlarging which one is cleared, and modifying the exhaust pipe are not allowed in principle.

Yes, but you need to apply to your local vehicle authority.

According to the "Motor Vehicle Registration Regulations":

Article 10 If a registered motor vehicle has any of the following circumstances, the owner of the motor vehicle shall apply to the vehicle administration office at the place of registration for change of registration:

1) Changing the color of the body;

b) replacement of the engine;

3) Replacing the body or frame;

4) Replacement of the whole vehicle due to quality problems;

5) The nature of use of commercial motor vehicles changed to non-commercial motor vehicles or non-commercial motor vehicles changed to commercial motor vehicles;

6) The residence of the owner of the motor vehicle moves out of or into the area under the jurisdiction of the vehicle management office.

You can apply to the vehicle management office at the place of registration to change the registration.

If it is a change item provided for in subparagraphs (1), (2) and (3) of the first paragraph of this article, the owner of the motor vehicle shall apply to the vehicle management office for a change of registration within 10 days after the change; If it is a change item provided for in item (6) of the first paragraph of this article, the owner of the motor vehicle shall complete the handling of the road traffic safety violations and traffic accidents involving the vehicle before applying for transfer.

Wheel modification has always been popular in the modification industry, and choosing the right set of wheels can indeed improve a lot of appearance. Some pot friends think that the original wheels are small and ugly, so they want to replace the wheels with large specifications. Can 16-inch wheels be retrofitted with 17-inch wheels? Let's take a look!

It is technically possible to disassemble and replace, but it is not allowed by law. First of all, the laws and regulations should be the same for all the technical parameters of the old and new wheels, and they can only be changed in terms of style. After the second modification of the wheel hub should be immediately to the vehicle management office for the record, after the record will allow you to distribute a new vehicle license again, after obtaining the new vehicle license can be used normally.

Does it make more sense to change to a larger wheel?

Depending on the situation, if you want your car to handle better, then choosing the most suitable large wheels will undoubtedly reduce the roll when cornering (since large wheels are paired with thinner tires). If you want to improve the comfort of the car, then it is not advisable to change the wheels, but it is more specific to propose a set of silent mode tires.

Is commercial insurance payable for driving and hitting people with a wheel?

It depends on the situation. If a safety accident occurs due to the quality of the product quality of your modified wheels, then the car insurance company can have the right not to pay compensation (this is a big reason for not paying for commercial insurance after you hit the car after you get on the runway).

Interpretation of the main parameters of the wheel hub (list of wheel tires).

1. Total width. J value indicates the total width of the tire, generally speaking, if the J value of the new and old wheels is not the same, the tire also has to be selected again, actually see the following report.

2. Diameter. Diameter is generally indicated by r, and the diameter jeopardizes the size of a hub.

3. The diameter of the pitch circle (PCD) and the hole spacing.

PCD refers to the diameter of the hole distance between the mounting screws in the middle of the hub, and the commonly used hubs are all fixed by five or four anchor bolts. For example, this main parameter means that the hub is fixed by 5 screws and the pitch diameter is. It is best to use the same main parameters as the original wheel diameter.

4. Offset (cover rock letter ET value).

The ET value can be understood as the outward throwing level of the hub, and the larger the ET value, the heavier the hub is. Therefore, if the selected hub ET value is too small, it is very easy for the wheel hub to highlight the car body. If the ET value is very large, it is very easy to scratch the lining plate.

5. After we replace the tires and wheels, we also need to measure whether the diameter of all wheels has changed, generally speaking, the size of the wheels after changing the wheels needs to be within 3% of the original wheels size, otherwise it will affect the speed of the car. The formula is calculated as follows.

Diameter of the tire = 2

16-inch wheels can be modified with 17-inch wheels, and after the car's wheels become larger, it will also bring people a new experience in terms of vision, and at the same time increase the aesthetics of the car.

It is worth mentioning that the size of the wheel used in the car will affect the driving experience of the car, because the size of the tire will not change, so the larger the wheel used in the tire, the smaller the thickness of the tire, and the more obvious the road feeling will be in the sleepy hidden process of driving the car.

It should be noted that if the size of the wheel used in the car is large, you must drive carefully in the process of driving the car on a daily basis, especially when the gear ruler is driving in some poor road conditions and encountering some ditches and bumps, it is very easy to have a puncture.

The larger the wheel, the better the visual experience, but one thing to note is that after changing the wheel hub of the original car, if the wheel hub of the car is not coordinated with the height of the body, it will feel that the body of the car is raised, which plays a role in the visual aspect, so do not modify the wheel hub of the car tire at will.

Regardless of the material used in the wheel, the larger and wider the hub, the heavier the weight and the more power it needs to turn.

Introduction: People who know cars are generally more rational when choosing cars, and they will consider the safety, economy and practicality of the vehicle more, which is why many drivers choose Japanese cars, because the wheels of Japanese cars are generally not too big, and some people will change the wheels of the car to 17-inch wheels, is it because it is good for the car? <>

1. Why do you want to change the wheels of the car to 17-inch ones?

Because the larger the car wheel, the smaller the cushion thickness of the rubber tire will be, however, when the curb weight and maximum speed of the car must be, it is not recommended to replace the large wheel, when the tire shock absorption effect is reduced, it is easy to hurt the car wheel hub when encountering extreme road conditions, and it also has a great impact on the ride comfort, in addition, the wheel hub will increase the tire quality, although the wheel hub is made of aluminum alloy, but the extra branch will increase fuel consumption, so people who understand the car choose the car like to choose a low-profile car, Naturally, 17-inch or even 16-inch wheels are preferred, and when the wheels become larger, the tires will also widen and the friction will increase, resulting in increased fuel consumption. <>

2. What are the advantages and disadvantages of hub size?

First of all, the wheel hub is too large and easy to be scratched, and it is not the same in terms of low flat ratio tires and durability, in addition, many people will feel that small wheels with high flat ratio tires will affect cornering stability and restrict vehicle performance, although the big wheels are good-looking, big sister, can increase the tire width and improve the grip, in addition, the rest of the large wheels are almost all shortcomings, first of all, the comfort of the wheels will be reduced, and it will also cause tire damage, large wheels are often much higher than small tires, A larger tire width will bring better grip and handling, but the cost will be that the friction will increase, which will increase the fuel consumption of the car, but there are still many reasons to consider in the choice of wheels, such as the structure of the tire forest, the size of the tire and so on. <>

3. Summary. So don't look at the big wheels handsome and good-looking, the real old drivers will still choose 17-inch small wheels, because the comfortable model has low tire noise, the tires are not easy to bulge, and the ** of changing the tires is also relatively low, if it is a family car, it is better to buy a model with small wheels.

It's really because it's good for the car, because the 17-inch wheels are not easy to generate friction, and they don't generate a lot of heat in the process of forming and running.

The first is good for the car, and the second is that it can solve some unnecessary troubles, and it is also better to drive.

The 16-inch wheels can be replaced with 17-inch tires. The main role is to look good, and secondly, it can improve a little bit of stability, and the increase in height is basically negligible.

The size of the wheel is actually the diameter of the wheel, we can often hear people say 15-inch wheels, 16-inch wheels, where the inch refers to the size (diameter) of the wheel. Generally in cars, if the wheel size is large and the tire flat ratio is high, it can have a good tension effect visually, and the stability of the vehicle handling will also increase, but then there is an additional problem of increased fuel consumption.

There is no effect, the wheel hub is enlarged and widened, and the tires are also increased and widened, and the stability and comfort of the vehicle are improved, but the resistance is increased during driving, but the braking performance is increased, and the fuel consumption is increased but it is not obvious.

Hello, yes This does not affect [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】