What should I do if the solid wood window sill board is soaked in rain?

It depends on the specific immersion of the floor, if it is a solid wood floor, you can first wipe off the water on the surface with a dry cloth and dry it with a hair dryer. If the laminate floor is soaked in water, it is very troublesome, and if it is serious, it should be removed and replaced with a new one. This requires the soaking of the wooden floor, if there is not much water, mop it dry as soon as possible, remove the water stains, you can use a fan, and you can not heat it to bake.

If a large amount of water is soaked for a long time, the floor has been deformed and swollen, and it can only be removed and replaced. First remove the baseboard around the corner, remove the floor piece by piece, the floor is assembled on the very good, dismantle the floor to the sun to dry, deal with the problem of water leakage, mop the ground water, ventilate for a few days, find the installation master to reinstall after the ground is completely dry.

The correct process of handling the wooden floor after it has been soaked in water: Step 1: Remove the blistered wooden floor first.

Allow the ground to air dry. Step 2: The removed wooden floors are generally soaked in water and deformed.

It is recommended that the wooden flooring can be replaced with a new one. Remove the baseboards on all four sides as soon as possible, and then preferably remove a corner (about three or four rows of floors) from the side of the floor that is a male groove to drain the water manually. Depending on the season, if you open the front and back doors and windows in summer, the floor will dry out naturally after a while, and if it is spring or winter, you can only turn on the air conditioner to get the humidity out.

Open the window for ventilation, move away from all household appliances and furniture, sometimes the water on the surface is dry, but there is still moisture in the floor, if there is a condition, you can turn on the dehumidification function of the air conditioner, and open it every three or four days. It is best to reach about 40 days (depending on the season, if it is longer in winter). The solid wood floor of my house was blistered by a layer of water (oak wood) from the upstairs leakage, and it did not deform at all after drying, it was about 30 centimeters long and 6 centimeters wide The kind of short floor is fast, and a group of four is a right-angle type.

For the floor where the water is not serious, the surface water should be sucked dry in the shortest possible time, and a small area of available vacuum cleaner can suck up the water vapor in the splicing gap of the soaked wood floor. However, do not use hot air to prevent the surface from drying out due to heat and drying.

First of all, it is necessary to see whether the situation of the solid wood window sill is soaked in water, if it is local water seepage, you can use a dry towel to dry its surface, and then use a hair dryer and other equipment to continue to absorb water; If the solid wood window sill is a large area of water seepage, a confined space is required, and then the air conditioner is turned on to evaporate water in a large area; If the water seepage of the solid wood window sill is serious, it is necessary to pry up the window sill plank, and then ventilate it after treatment; Finally, the solid wood window sill can be polished and waxed to restore its brightness.

It should be dried in the sun, which will prevent it from becoming moldy and more damaging.

Depends on whether the solid wood window sill is heavily flooded. If it is local water seepage, dry the surface with a dry towel, and then use a hair dryer and other equipment to continuously absorb water; If there is a large area of water seepage on the solid wood window sill, a closed space is needed, and then the air conditioner is turned on to evaporate water in a large area; If the water seepage of the solid wood window sill is serious, it is necessary to pry up the window sill plate and ventilate it after treatment; Finally, solid wood window sills can be sanded with wax oil to restore their brilliance.

If it is found early, only a small local space is flooded, and the water seepage is not serious, and it will not have much impact on the entire solid wood window sill. In this case, first dry the surface with a dry towel, then use other dry towels to absorb the moisture from the board, and finally open the window to ventilate and help the board recover. If you are worried that the effect of opening the window for ventilation is not obvious enough, you can also use a vacuum cleaner to absorb water vapor in a small space, or use the cold air of a hair dryer to dry, but do not use hot air to dry to avoid surface cracking and deformation caused by hot drying.

When using the equipment to absorb water vapor, it should be noted that the nozzle needs to be kept at a certain distance from the solid wood board to prevent cracks due to close contact with the solid wood board.

If the solid wood window sill is soaked in water in a large area, if the soaking time is not long, the water stains on the surface can be quickly wiped dry, and then moistened with air conditioner refrigeration. First, close the doors and windows of the room, and then turn the air conditioner to the lowest temperature. You can also use an electric fan to turn your head and blow air on the solid wood windowsill.

Usually, it dries in a day or so. The solid wood window sill has a large water seepage area and serious water seepage. Then it is necessary to contact an experienced construction supervisor.

The wooden floors are carefully pried up and then stacked in a well shape, using the weight generated by the stacking to prevent deformation. Also, when laying out and placing the wood floor, be careful to place the back of the wood floor upwards to prevent the surface from drying out and cracking due to rapid drying. Then, you need to place it in a ventilated and dry place and wait for 1 2 you can in a week**.

When there are serious water marks or scratches on the surface of the solid wood window sill, it means that the traces are printed on the wood through the wood wax oil protective film, and the water soaking degree is serious, and the wood is damp and moldy. Therefore, first of all, the entire surface is sanded with rough sandpaper, the protective layer of wood wax oil is sanded, and then the sanding is continued until the defect is eliminated and only some minor scratches are left on the surface.

If you have bought a solid wood window sill, but now the solid wood window sill is soaked by rainwater, you should quickly remove the solid wood window sill board and then air dry. But don't expose these solid wood window sills to the sun, otherwise these window sills will all rot and will all burst open.

Some people buy very strange things in life, and if we have already bought such products, then we must learn to fix them in our daily lives. In this way, we can have a better living environment, and we can also increase the life of the product. If the solid wood window sill board you buy is soaked in rainwater, you should remove all the solid wood window sill boards at this time, and then use some products to air dry, but you should not put such products in the sun exposure, because solid wood window sill boards can not be soaked by rainwater, and everyone also knows that if such wooden boards are soaked by rainwater, it may be easy to rot.

Therefore, we must buy the right products, and we must pay attention to the protection of such products in our daily lives, so that we can improve the life of the products, and we can also save some money. If such products are damaged, we also have to spend a lot of money to buy these products at this time, so we must pay attention to the maintenance of these products in our daily lives, so that we can also improve the use time of the products, and also improve our quality of life.

Everyone must buy the right product, if you usually don't have time to maintain, you should not buy such a product at this time. We must pay attention to repair in our daily life, and we must spend time on maintenance, and we must understand the rules of use in our daily life, so that we can better use these products.